User Manual

19
:FUNCtion:BURSt:PHASe {<start phase>}
Function
Query/set the start phase of burst.
Explanations
Range: -360°～+360°
Example
:FUNCtion:BURSt:PHASe 120 sets the start phase of burst as 120°
34. :FUNCtion:BURSt:MODE
Syntax
:FUNCtion:BURSt:MODE?
:FUNCtion:BURSt:MODE { NCYCles|GATed}
Function
Query/set the burst mode (N-Cycle or Gated).
Explanations
Example
:FUNCtion:BURSt:MODE GATed sets the burst mode as N-Cycle.
35. :FUNCtion:BURSt:NCYCle
Syntax
:FUNCtion:BURSt:NCYCle?
:FUNCtion:BURSt:NCYCle {<cycle number>}
Function
Query/set the cycle number of burst.
Explanations
This command is invalid in gated mode or the cycle number is infinite.
Example
:FUNCtion:BURSt:NCYCle 110 sets the cycle number of burst as 110 cycle