Datasheet

109
12. Appendix
12.1. Appendix A: Enclosure
Standard Accessories:
 A power cord
 A USB cable
 A CD (included application software, USB-driver, operation manual)
 User’s manual
12.2. Appendix B: General Care and Cleaning
General Care
Do not store or leave the instrument where the liquid crystal display will be exposed to
direct sunlight for long periods of time.
Caution:
To avoid any damage to the instrument, do not exposed it to any sprays, liquids, or
solvents.
Cleaning
Inspect the instrument as often as operating conditions require.
To clean the instrument exterior, perform the following steps:
1. Wipe the dust from the instrument surface with a soft cloth. Do not make any scuffing
on the transparent LCD protection screen when clean the LCD screen.
2. Disconnect power before cleaning your instrument. Clean the instrument with a wet
soft cloth not dripping water. It is recommended to scrub with soft detergent or fresh
water. To avoid damage to the instrument, do not use any corrosive chemical
cleaning agent.
Warning: Before power on again for operation, it is required to confirm that the
instrument has already been dried completely, avoiding any electrical
short circuit or bodily injury resulting form the moisture.