Datasheet

52
(8) Press〖Harmonic Amplitude〗key and set it to be 50.00%.
(9) Press〖Execute〗key. The synthesized waveform will be shown after a while.
5.16 System Configuration
Press 【Utility】key to set the items like Language, Sync Output, Interface, Power Off
State, Display/Beep, System Resume, Storage, Recall, Calibration and System Update.
5.16.1 Language
Press 〖Language〗softkey to choose Chinese language or English language. The
selection is available for operate menu and prompt information.
5.16.2 Sync Output
Press 〖SYNC〗softkey to enable of disable the sync output.
5.16.3 Interface
Press〖Interface〗to enter into the setting menu, which have〖Network〗and〖Return〗
two options. Press〖Network〗key and set the DHCP, IP address, Subnet Mask, Default
Gateway and Return.
Press〖DHCP〗key to set DHCP on or off. If DHCP is on, user can not set the IP, Subnet
Mask and Default Gateway.
Press〖IP Addr〗key to set IP address by numeric keys.
Press〖Subnet Mask〗key to set subnet mask by numeric keys.
Press〖Default Gateway〗key to set Default Gateway by numeric keys.
Press〖Return〗key to go back to last level menu, and press〖Confirm〗to enable the
setting.