User Manual

6.6. Recording Measurement Data
Press the "F3" key (SAVE). Then press the "F3" key (DOWN) to
select the menu item RECORD and press the "F1" key (ENTER).
a) SET DURATION
Now use the key "F3" (DOWN) the menu item "Set Duration"
and confirm by pressing "F1" ENTER. Here you can set the
duration of the measurement.
Increase with the "F2" key (+) the setting of individual points
(hour, minute, second). Move the digit to the next point with the
"F3" key (>>). If you finished the settings, confirm it with the "F1"
key (OK).
b) SET SAMPLE INTERVAL
Press the "F3" key (DOWN) to select the next item "Set Sample
Interval" (sampling rate) and confirm by pressing the "F1" key
(ENTER).
Increase with the "F2" key (+) the setting of individual points
(hour, minute, second). Move the digit to the next point with the
"F3" key (>>).If you finished the settings, confirm it with the "F1"
key (OK).
-101-