User Manual
2. Main configuration and data log display panel – use to change general setting of
program and display data log.
3. Voltage and Current setting panel – use to set incident output value and output
On/Off.
4. Data handling panel – use to save, load and print data.
5. External Timed Program Description input space – use to enter description of
External Timed Program.
6. Program running cycle setting panel – use to set running cycle for External Timed
Program.
7. Information panel – use to display Maximum voltage/ current, Sampling time, upper
voltage/ current limit and software version.
11.2. Display panel
11.2. Set output value and On/Off status
You can directly type the desired output voltage & output current and then click “Set” button to
set the value. Or you can use slide bar to adjust the value.
-47-
The display show following
information
- Output Voltage value
- Output Current value
- Output Power value
- Output On/Off status
- C.V./ C.C. Model
- Setting values