User Manual

3. General Characteristics
* Bandwidth: 30 MHz, 70 MHz or 125 MHz
* Sample rate(real time): 250 MSa/s (P 1265) or 1 GSa/s (P 1305/1310)
* Dual channel, 10k points on each channel for the Record length (P 1265) or 100 k point (P 1305/1310)
* Autoscale function;
* 8 inch high definition TFT display (800 x 600 pixels);
* Built-in FFT function;
* Pass/Fail Function, optically isolated Pass/Fail output;
* Waveform record and playback;
* VGA output;
* Various triggering function;
* USB communication ports and LAN interface;
* Built-in Chinese, German and English help system;
* Multiple language user interfaces (english, german, spanish, … ).
3.1. Introduction to the Structure of the Oscilloscope
When you get a new-type oscilloscope, you should get acquainted with its front panel at first and this digital
storage oscilloscope is no exception. This chapter makes a simple description of the operation and function of
the front panel of the oscilloscope, enabling you to be familiar with the use of the oscilloscope in the shortest
time.
3.2. Front panel
This oscilloscope offers a simple front panel with distinct functions to users for their completing some basic
operations, in which the knobs and function pushbuttons are included. The knobs have the functions similar to
other oscilloscopes. The 5 buttons (F1 ~ F5) in the column on the right side of the display screen or in the row
under the display screen (H1 ~ H5) are menu selection buttons, through which, you can set the different
options for the current menu. The other pushbuttons are function buttons, through which, you can enter
different function menus or obtain a specific function application directly.
-90-