Instructions / Assembly

PEACE OF MIND THRESHOLD RAMP

For Wheelchairs and Scooters

FOR YOUR SAFETY PLEASE READ

•Maximum weight limit is 800 pounds

•Read and follow all instructions before use

•Do not use if ramp is damaged or unstable

It is important to refer to your equipment’s (wheelchair or scooter) user guide for the proper degree of incline

or decline. Never exceed user guide recommendations.

Packaged as follows:

The POM Threshold Ramp comes ready to assemble in the following heights: 3 inches, 4 inches, and 6

inches. Parts will vary depending on the size purchased.

Part #POMSP

Starter Plank

Part #POMMP

Main Plank

Part #POMTP

Top Plank

Part #P(X)L

Leg

(X=2,3,4,5 or 6” Leg)

See reverse side for assembly instructions

Questions or concerns about your product?

Contact: American Access, Inc.

Phone: (888)-790-9269

www.aaramps.com

PAGE 1
PEACE OF MIND THRESHOLD RAMP For Wheelchairs and Scooters FOR YOUR SAFETY PLEASE READ •Maximum weight limit is 800 pounds •Read and follow all instructions before use •Do not use if ramp is damaged or unstable It is important to refer to your equipment’s (wheelchair or scooter) user guide for the proper degree of incline or decline. Never exceed user guide recommendations. Packaged as follows: The POM Threshold Ramp comes ready to assemble in the following heights: 3 inches, 4 inches, and 6 inches.
PAGE 2
Assembly Instructions Figure to the right illustrates a completed POM Threshold Ramp with a 6 Inch rise. Step 1. Begin with part #POMSP and insert part #POMMP along the groove. PEACE OF MIND THRESHOLD RAMP For Wheelchairs and Scooters Big blown up diagram Step 2. While holding #P(X)L parallel to #POMMP, line up the 2 molded lips of #P(X)L with the 2 grooves of #POMMP and slide #P(X)L into the grooves. Repeat this process until all #P(X)L and #POMMP have been fit together.