Installation Guide

MADE & PRINTED IN THAILAND

COMPONENTS

1. AFFIX ( B1) TABLE HOLDER AND (C1)BOTTOM

BASE ON (A1) WOOD POST WITH WOOD SCREWS

(F) AS SHOWN IN FIGURE ABOVE.

IN THE SAME WAY AFFIX (B2) AND (C2) ON (A2)

POST WITH WOOD SCREWS (F)

ASSEMBLY (D) CROSS BAR AND (E) HANDLE ON

(A1) AND (A2) WOOD POST WITH WOOD DOWEL

(G) AND WOOD SCREWS (F), USE ALLEN KEY (H)

TO TIGHTEN ALL WOOD SCREWS.

NOW YOUR TABLE STAND IS READY FOR TRAY

TABLE STORAGE.

ASSEMBLY INSTRUCTIONS

IMPORTANT: To avoid scratches to wood parts, it is recommended that assembly of the stand shall be done

on a smooth surface. Read the assembly instructions and be familiar with the components. Check to be sure

assembly hardware and tools are complete. For optimum performance of the tray table stand, the joints must

be secured properly with dowels and screws.

Tray Table: 25 lbs.

Tray Table Stand: Limit to 4-Tray TablesMAXIMUM LOAD WEIGHT:

5-PIECE TRAY TABLE SET

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT SAFETY INFORMA

TION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

A. Wood Post (2 pcs)

B. Table Holder (2 pcs)

C. Bottom Base (2 pcs)

D. Cross Bar (1 pc)

E. Handle (1 pc)

F. Screw (12 pcs)

G. Wood Dowel (4 pcs)

H. Allen Key (1 pc)