Maintenance Guide

Cobham Wireless
idDAS Installation and Maintenance Guide 00109GU Rev. 2.0
Page | 77
6. Gently tighten the bolt by hand so that the anchor section of the fixing expands and grips the inside of
the hole.
Figure 5-17: Inserting Fixing and Tightening.
7. As the bolt pulls its way in, the sides of the anchor section are forced outwards, gripping the
surrounding surface.
Figure 5-18: Anchor Sides Pushed Outwards.
8. Once all four fixings are in place, carefully withdraw the four bolts.
Figure 5-19: Withdraw Bolts