Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Customer Service: 1-800-887-6326 (weekdays 8 a.m. – 5 p.m. CST)
3. Read and save these instructions.
352-2031
TM
Patriot Lighting
080730
Bulb Type B Max.60W
Acrylic Drop(-2)
61 pcs
Acrylic Drop(-1)
28 pcs
Acrylic Drop(-3)
28 pcs
(not included)
Loop Lock
Loop Lock
Loop
Upper Fixture
Crystal Drop With 2 beads
Set Screw
Stem
Coupling
Metal Frame
Socket Base
Rack
Crystal Drop With 3 beads
Outlet Box
House Grounding Wire
Wire Nut
Fixture Wire
Fixture Grounding Wire
Mounting Strap
Green Grounding Screw
Mounting Screw
Nipple
Canopy
Top Loop
Hex Nut
Washer
Collar
Chain
1. Attach the nipple to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Secure the top loop to the nipple.
4. Attach the upper fixture onto the socket base by securing
the stem into the coupling.
5. Choose the length of the chain you need, then weave the
fixture wire and the fixture grounding wire through the
chain, collar and canopy.
6. Connect one end of the chain with the loop by using a
loop lock.
7. Connect the other end of the chain with the top loop by
using another loop lock.
8. Thread the fixture wire and fixture grounding wire through
the top loop, nipple and mounting strap.
9. Pull out the outlet wires and house grounding wire from the
outlet box. Make wire connections using the wire nuts:
---The smooth wire (marked) from the fixture to the black
wire from the power source.
---The ridged wire (unmarked) from the fixture to the white
wire from the power source.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it to the
house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting
the top loop, then secure it with the collar.
11. Install bulbs (not included). See relamping label
at socket area or packaging for maximum allowed
wattage.
12. Install the crystal drops onto the upper fixture as
shown in diagram.
13. Install acrylic(-1) to the rack. See the right graph for
correct position.
14. Install acrylic(-2) to the metal frame. See the right graph
for correct position.
15. Attach acrylic(-3) onto the rack, secure them with set
screws. See the right graph for correct position.
16. Turn on the power at the main fuse or circuit breaker box.