Installation Instructions

Fig.7.

Linking Cord

Cabinet Light Fixture

B. Using linking cord:

Install the additional cabinet light fixture following steps 1-5 of the instruction steps. Once installed,

attach the linking cord (12 inches) between the cabinet light fixture (previously installed) and the new

one. (See Fig.7)

Fig.6.

Cabinet Lighting Fixture

Outlet

24W Power Adaptor

Plastic Connector

1. Align connector on end of new fixture with connector on end of existing fixture.

2. Push new fixture to existing fixture until fixtures are flush and connectors snap together by using

plastic connector. (See Figure. 6)

Cleaning instructions

Your fixture is made from quality materials that will last for many years with minimum care. When

cleaning, make sure you have unplugged your fixture, and have allowed sufficient time for the fixture

to cool to room temperature. You should clean the housing and lense using a damp soft cloth. You

should plug your fixture back in only after the fixture has thoroughly dried.

130920

A. Using plastic connector:

Note:

1. This hardware package includes a label. Please

paste the label on the cabinet, in order to remind

the position of the On / Off switch.

Label

Switch