Use and Care Manual

3
Description
In order for you to fully understand the information contained
in this manual, you need a basic understanding of the
Cordless Finish Nailer. As you can see in the illustration
below, the Cordless Finish Nailer is made up of three major
areas: handle, motor, and magazine.
As you examine the Cordless Finish Nailer, become familiar
with the three major areas and the various components
located in each of them.
The Handle Assembly contains the fuel cartridge, indicator
light, and the trigger.
The Motor Assembly contains the cover and filter, the motor
housing, the nose, and the work contacting element.
The Magazine Assembly daol ot stnenopmoc eht sniatnoc
and control the fastener and the battery for the Cordless
Finish Nailer.
Specifications
Dimensions: Weight-with battery 4 .6 lbs
Height 11-1/2 inches
Length 10-3/4 inches
Magazine Angled
(use Paslode angled fasteners only.)
Cycle Rate: Intermittent Operation – 2 to 3 nails
per second
NOTE: Exceeding these cycle rates could cause the tool
to overheat, resulting in loss of performance or damage to
tool components.
Fasteners: 16 Gauge Angled
Magazine
Capacity:
2 nail strips, or 100 fasteners.
Battery : 7.4 volts DC -
Provides enough energy to
drive approximately 6000 fasteners on a
full charge.
Fuel
Cartridge:
Trim fuel cartridge (.64oz) Part #816007
Liquid hydrocarbon - Provides enough fuel
to drive approximately 1000 fasteners.
Magazine Assembly
fuel cartridge compartment
cap
removable
grille & filter
no-mar tip
Handle Assembly
(soft grip)
soft
touch
trigger
Motor
Assembly
battery compartment
(opposite side)
battery indicator light
(opposite side)
follower
motor housing
nail count indicator
lockout
feature
adjustable
depth of drive
(opposite side)
quick clear
cover
rafter/belt hook
The Paslode Cordless 16 ga. Angled Lithium-ion Finish
Nailer is a self-contained, fully portable nailer that uses
liquid hydrocarbon fuel to power a unique linear drive
internal combustion motor.
Overview of the Paslode Cordless
16 Gauge Angled Lithium-ion Finish Nailer
By using the Paslode Cordless 16 ga. Angled Lithium-ion
Finish Nailer at its recommended cycle rate, you will be
able to drive several thousand nails in a typical workday.