User manual

7
ASSEMBLY (starts at page 36)
ASSEMBLY (starts at page 38)
DESCRIPTION (starts at page 35)
ASSEMBLY OF GRASS CATCHER (starts at page 35)
OPERATION (starts at page 39)
ENGINE ADJUSTMENTS
Refer to the engine manufacturer's maintenance manual.
CAUTION:- 0.6l Oil must be added to the engine before use.
ASSEMBLY REAR DEFLECTOR (starts at page 35)
ADJUSTMENT OF CUTTING HEIGHT (starts at page 39)
l Always operate with the deflector or grasscatcher in the correct position.
l Always stop the engine before removing the grasscatcher or adjusting the height of cut.
l Never place your hands or feet underneath the deck or into the rear grass discharge chute while the engine is running.
Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been
missed.
Never lift the rear of the mower while starting the engine or during normal operation.
Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running.
SAFETY PRECAUTIONS (starts at page 39)
Keep the engine stop lever (14) depressed during machine
operation. When the lever is released, the engine stops.
MOWING
To cut the grass, push the lawn mower manually or insert
ENGLAND
A
B
C
D
F
J
I
K
L
M
N
M
O
P
Q
STARTING THE ENGINE
Once the machine has been set up properly, start
the engine as follows:
a)
Engines with choke system:
when the engine is cold, position the accelerator
lever (13) on START
b)Operate the engine stop lever (14) to prepare
ELECTRICAL STARTING :
lInsert the plug (G) in the socket (H) on the engine. While holding the engine stop lever (14).Turn the ignition key (17).
CAUTION:
The blade starts turning as soon as the engine is started.
Self-Propelled/ Electric Start Lawnmower.
Remove the bail arms, attach cables as shown and re-fit the bail arms, if applicable.
Assemble the handle fit the levers with the pins and clips provided, assemble the
wheels as shown and throttle if supplied.
(starts at page 39)
(starts at page 40)
(starts at page 40)
(starts at page 39)
(starts at page 40)
1 Upper handles 7 Deck 13 Throttle lever
2 Fuel-enrichment pump 8 Adjusting levers for cutting height 14 Engine stop lever
3 Fastening knobs for upper handles 9 Spark plug 15 Reduction gear
4 Grass catcher 10 Fuel cap 16 Console
5 Oil filler cap 11 Engine start-grip 17 Ignition key
6 Oil drain plug 12 Rear deflector 18 Clutch lever
the engine for start, keep lever pressed against handle
while starting and using the machine - it operates the
engine brake.
c)
Engines with primer system:
Press the fuel-enrichment pump (2) located on the
carburettor 3 or 4 times position the accelerator lever
(13) on MAX.
Keep the engine stop lever (14) depressed during machine
operation. When the lever is released, the engine stops.
MOWING
To cut the grass, push the lawn mower manually
(starts at page 40)
Manual lawn mower
Remove the bail arms, attach cables as shown and re-fit the bail arms, if applicable.
Assemble the handle fit the levers with the pins and clips provided, assemble the
wheels as shown and throttle if supplied.
Assemble the spring into the rear deflector as shown in figure C1, insert the rod through the holes on the rear deflector and spring as shown in figure C2.
Locate the rod into the mounting bracket as shown in figure C3, push down the sprint as shown in figure C4 to locate it into the slot which tensions the rear deflector.
For further information and explanations, read carefully the
user instruction manual of the engine.
d) Start engine.
MANUAL STARTING: (While holding the engine stop
lever (14)).
lHold the engine start-grip (11) and pull the starter rope
gently until you feel the resistance caused by
compression. Return the starter rope slowly then pull
the handle firmly towards you to its full extent.
ADJUSTMENT OF HANDLES HEIGHT (starts at page 39)
H
ASSEMBLY (starts at page 37)
E
Self-Propelled Lawnmower.
Remove the bail arms, attach cables as shown and re-fit the bail arms, if applicable.
Assemble the handle fit the levers with the pins and clips provided, assemble the
wheels as shown and throttle if supplied.
the automatic advance gear.
How to insert automatic advance: Lift up the clutch
handle (18) and keep it pressed in position.
CAUTION:
Engage the gear only when the engine is
running.
How to disengage advance: Release the clutch handle.
G
MULCHING CAP INSERTION (starts at page 38)
To cut the grass with the mulching system (no grass collection), lift the rear deflector panel and insert the cap by fixing it with the spring as shown in the figure.