User's Manual

D3POS User Reference

8. Printer – D3 POS option facts

This printer, 58mm (2 inches) in width, Printer paper (Thermal Paper) is used.

8.1 Check the print paper

Printer paper through paper check window on the right side of the device can see.

8.2 Change the print paper

1. Push the latch up, the upper part will be opened automatically.

2. Open the upper part completely.

3. Put the paper like picture.(Check paper direction.)

4. Close the upper part like picture.

5. When you cut paper, pull the paper from left to right.

8.3 printer output steps

(1) Click DotFunctionTest in windows.

(2) You can confirm picture like this.