Operation Manual

6 Before getting started
To remove the battery, lift the flap located underneath the battery and slide it to
the rear.
Setting up the MiniDrone on the Hydrofoil
Before setting up the MiniDrone, assemble the Hydrofoil and check the battery has
been installed correctly.
1. Insert the front of the MiniDrone in its support, the head facing the front of the
Hydrofoil. Ensure that the two front lugs on the support are inserted into the
front arms of the MiniDrone (photo A).
2. Fasten the clip on the rear of the MiniDrone (photo B).
Switching on the MiniDrone
Insert the battery into the slot or press the On/Off button
underneath the MiniDrone.
Then place your MiniDrone on a flat surface so it can
complete its initialisation phase.
The eyes of the MiniDrone will turn red, amber, and then
green.
Compatibility
You need a smartphone or tablet that supports Bluetooth
®
4.0 to use the
MiniDrone.
For more information, go to the Compatibility page on our website.