aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding PRESS-TO-CONNECT REFRIGERANT FITTINGS ZoomLock MAX ® Press-to-Connect Refrigerant Fittings Catalog K-3, Engineering Submittal, November 2021
Page 2 / Catalog K-3, ZoomLock MAX PARKER SAFETY GUIDE FOR SELECTING AND USING ZOOMLOCK MAX FITTINGS AND RELATED ACCESSORIES WARNING FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS, IMPROPER SELECTION OR IMPROPER USE OF ZOOMLOCK MAX FITTINGS AND RELATED ACCESSORIES (“PRODUCTS”) CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. POSSIBLE CONSEQUENCES OF FAILURE, IMPROPER SELECTION OR IMPROPER USE OF THESE PRODUCTS INCLUDE BUT ARE NOT LIMITED TO: • Fittings thrown off at high speed.
Catalog K-3, ZoomLock MAX / Page 3 ZoomLock MAX Press-to-Connect Refrigerant Fittings TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Press Tools and Jaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page 4 / Catalog K-3, ZoomLock MAX Connect Copper in Seconds, Improves Profitability for HVACR Companies Rated up to 700 psi 48 bar PRESS-TO-CONNECT REFRIGERANT FITTINGS ZoomLock® MAX fittings, designed for the air conditioning and refrigeration markets, allow contractors to make secure leak-free connections in seconds. It means less time on the job and more money in the contractor’s pocket. ZoomLock MAX fittings provide clean, leak-proof connections for refrigerant lines up to 700 psi.
Catalog K-3, ZoomLock MAX / Page 5 ZoomLock MAX Press-to-Connect Refrigerant Fittings FEATURES AND BENEFITS ■ Flame-free: Flame-free installation avoids the need for a fire permit and the risk of fire on site. ■ No Nitrogen Purge: ZoomLock MAX is a mechanical joint, thus eliminating the need for nitrogen purge during the jointing process. ■ Lower Installed Cost: A professional fitting which is quick and simple to install, saving time and money.
Page 6 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings TECHNICAL DATA Product Parameters ■ Applications: - Refrigeration - Air Conditioning - Heat Pump (Refrigeration side) - VRF and VRV ■ Continuous Operating Temperature: -40°F to 250°F / -40°C to 121°C ■ O-ring Temperature Range: -40°F to 284°F / -40°C to 140°C ■ Maximum Rated Operating and Abnormal Pressure: 700 psi / 48 bar / 4800 kPa ■ Burst Pressure: >3X Maximum operating and abnormal pressure >2,100 psig / >
Catalog K-3, ZoomLock MAX / Page 7 ZoomLock MAX Press-to-Connect Refrigerant Fittings PRESS TOOLS AND JAWS Parker Hannifin recommends the use of ROTHENBERGER press tools in combination with ZoomLock MAX ROTHENBERGER jaws. However other press tools may be used in combination with ZoomLock MAX ROTHENBERGER jaws. See table below for tool compatibility. Press Tools ROTHENBERGER ROMAX 4000 Includes the ROTHENBERGER ROMAX® 32 kN press tool, 2 batteries and battery charger.
Page 8 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings PRESS TOOLS AND JAWS (Continued) Jaws 32 kN ROTHENBERGER Jaw Set 24 kN ROTHENBERGER Jaw Set 19 kN ROTHENBERGER Jaw Set MZK-24KN JAW KIT (7 PIECE) 871409 MZK-19KN JAW KIT (7 PIECE) 871410 JAW SETS / PART NUMBERS Jaw Sets 7 Piece 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1-1/8 MZK-32KN JAW KIT (7 PIECE) 871408 INDIVIDUAL JAWS / PART NUMBERS 1/4” MZK-32KN JAW-1/4” 871428 MZK-24KN JAW-1/4” 871419 MZK-19KN JAW-1/4” 871411 3/8
Catalog K-3, ZoomLock MAX / Page 9 ZoomLock MAX Press-to-Connect Refrigerant Fittings COUPLINGS Dimensions A B Size 1/4 3/8 1/2 5/8 3/4 7/8 1-1/8 1-3/8 Dimensions Part Number Description 870508 870509 870503 870510 870505 870506 870507 870511 MZK-C4-HNBR MZK-C6-HNBR MZK-C8-HNBR MZK-C10-HNBR MZK-C12-HNBR MZK-C14-HNBR MZK-C18-HNBR MZK-C22-HNBR A B Inch mm Inch mm 1.54 1.50 1.57 1.77 1.79 2.22 2.24 2.80 39.0 38.0 40.0 45.0 45.5 56.5 57.0 71.0 0.12 0.12 0.20 0.12 0.06 0.33 0.24 0.11 3.0 3.
Page 10 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings REDUCERS Dimensions A B C D Size 3/8 x 1/4 1/2 x 1/4 1/2 x 3/8 5/8 x 1/4 5/8 x 3/8 5/8 x 1/2 3/4 x 1/2 3/4 x 5/8 7/8 x 1/2 7/8 x 5/8 7/8 x 3/4 1-1/8 x 5/8 1-1/8 x 3/4 1-1/8 x 7/8 1-3/8 x 7/8 1-3/8 x 1-1/8 CAPS Part Number Description 870800 870808 870801 870809 870810 870802 870811 870803 870812 870804 870805 870814 870806 870807 870815 870816 MZK-R64-HNBR MZK-R84-HNBR MZK-R86-HNBR MZK-R104-HNBR MZK-R106-HNBR MZK
Catalog K-3, ZoomLock MAX / Page 11 ZoomLock MAX Press-to-Connect Refrigerant Fittings 90° ELBOWS Dimensions A B B A Part Number Size 1/4 3/8 1/2 5/8 3/4 7/8 1-1/8 1-3/8 870600 870602 870603 870604 870605 870606 870607 870608 Dimensions Description MZK-90E4-HNBR MZK-90E6-HNBR MZK-90E8-HNBR MZK-90E10-HNBR MZK-90E12-HNBR MZK-90E14-HNBR MZK-90E18-HNBR MZK-90E22-HNBR A B Inch mm Inch mm 1.28 1.30 1.24 1.54 1.67 1.97 2.24 2.72 32.5 33.0 31.5 39.0 42.5 50.0 57.0 69.0 0.57 0.59 0.55 0.71 0.81 1.
Page 12 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings 90° STREET ELBOWS Dimensions A C B Size Part Number Description 3/8 1/2 5/8 3/4 7/8 1-1/8 1-3/8 871302 871303 871304 871305 871306 871307 871308 MZK-90SE6-HNBR MZK-90SE8-HNBR MZK-90SE10-HNBR MZK-90SE12-HNBR MZK-90SE14-HNBR MZK-90SE18-HNBR MZK-90SE22-HNBR Inch Dimensions B C mm Inch mm Inch mm 1.30 1.24 1.54 1.67 1.97 2.24 2.72 33.0 31.5 39.0 42.5 50.0 57.0 69.0 A 1.36 1.36 1.77 1.89 2.09 2.42 3.22 34.
Catalog K-3, ZoomLock MAX / Page 13 ZoomLock MAX Press-to-Connect Refrigerant Fittings TEES Dimensions B D C C A Size Part Number Description 1/4 3/8 1/2 5/8 3/4 7/8 1-1/8 1-3/8 870701 870702 870703 870704 870705 870706 870707 870708 MZK-T4-HNBR MZK-T6-HNBR MZK-T8-HNBR MZK-T10-HNBR MZK-T12-HNBR MZK-T14-HNBR MZK-T18-HNBR MZK-T22-HNBR Dimensions B C A Inch 2.13 2.48 2.60 2.99 3.31 3.50 3.74 4.41 mm 54.0 63.0 66.0 76.0 84.0 89.0 95.0 112 Inch 1.06 1.22 1.10 1.26 1.42 1.52 1.69 2.20 mm 27.0 31.
Page 14 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings Y-JOINTS Dimensions A A C A B Size 3/8 1/2 5/8 3/4 7/8 1-1/8 P-TRAPS Part Number Description 771102 771103 771104 771105 771106 771107 MZK-Y6-NA MZK-Y8-NA MZK-Y10-NA MZK-Y12-NA MZK-Y14-NA MZK-Y18-NA Dimensions A B C Inch mm Inch mm Inch mm 0.38 0.50 0.63 0.75 0.88 1.13 9.5 12.7 15.9 19.1 22.2 28.6 7.59 8.97 9.49 10.20 12.13 13.16 192 227 240 258 307 333 2.37 2.49 2.61 2.73 2.89 3.56 60.0 63.0 66.
Catalog K-3, ZoomLock MAX / Page 15 ZoomLock MAX Press-to-Connect Refrigerant Fittings FITTING STORAGE ZoomLock MAX fittings do not require special storage conditions. However to protect the HNBR O-ring a few simple precautions should be taken. The O-rings should be protected from light sources, in particular direct sunlight or intense artificial light having a high ultra-violet content.
Page 16 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings DESIGN CONSIDERATIONS (Continued) Space Required for the Pressing Process Y Y2 Y1 X X Space Required to Complete a Pressing Between Tubes and Wall ROTHENBERGER ROMAX 400 X Space Required to Complete a Pressing Between Tubes and Wall Corner ROTHENBERGER ROMAX 400 Tube Size OD (Inches) Y Inches mm Inches mm 1/4 1-1/4 30 2-3/8 60 3/8 1-1/4 30 2-3/8 60 3/8 2 50 2 50 4 100 1/2 1-1/4 30 2-3/8
Catalog K-3, ZoomLock MAX / Page 17 ZoomLock MAX Press-to-Connect Refrigerant Fittings DESIGN CONSIDERATIONS (Continued) Insertion Depth and Minimum Distances Between Pressings A Due to the reforming of the tube profile when pressed, it is advised that a minimum distance is allowed between each fitting. B Minimum Distance A Inches mm Nominal Size Inches 1/4 3/8 1/2 5/8 3/4 7/8 1-1/8 1-3/8 1/2 1/2 5/8 5/8 7/8 7/8 1 1-3/8 Insertions Depth B 10 10 15 15 20 20 25 35 Inches mm 0.71 0.71 0.75 0.87 0.
Page 18 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings DESIGN CONSIDERATIONS (Continued) Testing and Commissioning of Air Conditioning and Refrigeration Systems • If you are going to leave the pipework pressurized for 24 hours or longer to check for leaks, measure the system pressure and the ambient temperature at the start and finish of the tightness test. A rise in ambient temperature can mask a leak if this is not taken into account.
Catalog K-3, ZoomLock MAX / Page 19 ZoomLock MAX Press-to-Connect Refrigerant Fittings DESIGN CONSIDERATIONS (Continued) Elbow Equivalent Lengths Certain applications are more sensitive to pressure losses from piping and require the use of long radius elbows to help ensure the pressure drop is kept to a minimum.
Page 20 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings INSTALLATION INSTRUCTIONS Rotate 5 - 7 Times STEP 1 STEP 2 STEP 3 Cut the tube to length • Use a rotary tube cutter. • Ensure that the tube is cut square. • Check the tube has retained its shape and is damage free. Deburr and remove all external sharp edges Use a pencil type deburrer on internal edges • • • • Deburr the tube both internally and externally.
Catalog K-3, ZoomLock MAX / Page 21 ZoomLock MAX Press-to-Connect Refrigerant Fittings INSTALLATION INSTRUCTIONS (Continued) STEP 8 STEP 9 STEP 10 Insert the tube fully into the fitting. Ensure tube is fully inserted prior to pressing • Insert the tube fully into the fitting up to the tube stop. • To reduce the risk of dislodging the O-ring rotate the tube (if possible) while slipping it into the fitting. • Prior to pressing, ensure the tube has not moved out from the fitting socket.
Page 22 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings INSTALLATION INSTRUCTIONS (Continued) Installing a ZoomLock MAX Female Flare Connector to a Male Flare Connector Make the flare connection prior to pressing the ZoomLock MAX joint. If this is not possible care must be taken to prevent rotational forces being applied to the pressed joint. Torque Wrench Apply lubricating oil* to the inner surface of the flare.
Catalog K-3, ZoomLock MAX / Page 23 ZoomLock MAX Press-to-Connect Refrigerant Fittings FREQUENTLY ASKED QUESTIONS 1. Why is it significant that ZoomLock MAX is “UL Listed”? UL Listing ensures that ZoomLock MAX meets the industry requirements for field and factory installation. 2. How do I ensure I make a secure and leak-free joint? Follow all of the steps for prep and installation. 3. What is a “deep” scratch, and how do you clean this? Your fingernail can feel a deep scratch.
Page 24 / Catalog K-3, ZoomLock MAX ZoomLock MAX Press-to-Connect Refrigerant Fittings FREQUENTLY ASKED QUESTIONS (Continued) 11. How many crimps can you complete on a complete battery charge? Tool dependent; consult the tool manufacturer owner’s manual. 12. How do you know when to service the tool? Tool dependent; consult the tool manufacturer owner’s manual. 13. What is the expected life of the jaws? ZoomLock MAX jaws are laser hardened and have an indefinite life expectancy.
Catalog K-3, ZoomLock MAX / Page 25 ZoomLock MAX Press-to-Connect Refrigerant Fittings FREQUENTLY ASKED QUESTIONS (Continued) with the following standards: ISO 14903, Temperature Pressure Cycling and Vibration Test; UL 109 - 8, Vibration Test; UL 207, Fatigue Shock Test. 33.
Page 26 / Catalog K-3, ZoomLock MAX PARKER-HANNIFIN CORPORATION OFFER OF SALE 1. Definitions. As used herein, the following terms have the meanings indicated. Buyer: means any customer receiving a Quote for Products. Goods: means any tangible part, system or component to be supplied by Seller. Products: means the Goods, Services and/or Software as described in a Quote. Quote: means the offer or proposal made by Seller to Buyer for the supply of Products.
Catalog K-3, ZoomLock MAX / Page 27 (d) damage to the Products from an external cause, repair or attempted repair by anyone other than Seller, failure to follow instructions, guides and specifications provided by Seller, use with goods not provided by Seller, or opening, modifying, deconstructing, tampering with or repackaging the Products; or (e) Buyer’s failure to comply with these Terms. Seller shall not indemnify Buyer under any circumstance except as otherwise provided in these Terms. 14.
© 2021 Parker Hannifin Corporation. Catalog K-3 / 112021 Parker Hannifin Corporation Sporlan Division 206 Lange Drive • Washington, MO 63090 USA phone 636 239 1111 • fax 636 239 9130 www.zoomlockmax.