5 Gazebo GZ3D Aluminium Composite Roof Panels Assembly Instructions 9’7’’ 11 ’2’ ’ ’’ 1’2 7’ 1 10 ’’ 6 ’ 0 ’6’ ’ 1 Paragon Group USA Customer Service:(877) 782 4482 Email:cs-outdoors@paragongroupusa.
Introduction Thank you for purchasing the Gazebo GZ3D. When properly assembled and maintained, this gazebo will provide many years of enjoyment! These instructions include helpful hints and important information needed to safely assemble and properly maintain the gazebo. Please read these instructions completely before you begin. Our patented gazebo has been designed for easy assembly. All steps can be completed by a team of four people. The assembly should take about two hours.
Safety Advice • The gazebo must be positioned and fixed on a flat level surface. • Dispose of all plastic bags safely. Keep them out of the reach of children. • Keep children and pets away from the assembly area until the work is completed. • Always wear shoes, gloves and safety goggles when working. • Take special care not to touch overhead power lines with the aluminium profiles. • Do not attempt to assemble the gazebo in windy or wet conditions.
List of Parts four contact customer service before beginning assembly: Customer Service:(877) 782 4482 Email:cs-outdoors@paragongroupusa.com No. Profile Qty Step No.
No. Profile 19 Qty Step 1 5 No.
STEP 1 Assembling the Corner Profiles Place all the parts on a level surface. Make sure the pieces are in the correct positions before assembling. Carefully follow the order of assembly to ensure an easy installation. Wear proper safety gear including work shoes, gloves and goggles. Components Corner profile (1) Support frame (2) x4 Support plate (3) x4 Roof connector (4) x4 x4 1.
ATTENTION: Note: Do not need to assemble support frame (2) if you purchased the screen netting (GZ3DS or GZ3DXLS). 1.B 2 Slide support frames (2) over lower end of corner profiles(1). Attach support plates (3) to corner profiles as shown, using two screws(23) for each plate, make sure all screws are perpendicularly into the profile holes.
STEP 2 Assembling the Rails NOTE: The Rails (5) have a preassembled connecting parts to be inserted into Rails (6). Components Inner Roof Connector (7) Screw (20) x 12 Rail (5) x 16 x4 Rail (6) Outer Roof Connector (8) x4 2.A Screw (22) x 56 x 16 Insert connecting part of rail (5) into blunt end of rail (6) as shown. Attach with four screws (20). Repeat to create four sets of rails. 20 2.B Attach inner roof connector (7) to each rail set as shown, using two screws (22).
2.C Attach four outer roof connectors (8) and three inner roof connectors(7) to each rail set at pre-drilled screw holes, using screws (22). 8 8 7 VIEW FROM SIDE 22 22 7 8 8 7 8 77 8 7 VIEW FROM THE TOP ATTENTION: Attach roof connectors facing exactly in the directions shown.
STEP 3 Attaching the Rails to the Corner Profiles 3.A Attach one roof profile set (5+6) to two corner profiles (1) as shown, using screws (22) and supplied magnetic hex key (34) through holes in profile set. Components Screw (22) x 32 5 22 28 3.B 1 Close holes in profile set with plastic caps #3 (28). 5 28 1 Repeat step 3.A and 3.B to create two sets.
3.C Using at least 3 people, attach the remaining two roof profile sets (5+6) to corner profiles (1), connecting all four corner profiles (1). Fasten with four screws (22) and supplied magnetic hex key (34) on each side. Close holes in profile sets with plastic caps #3 (28). 6 22 1 6 5 5 6 1 5 6 1 6 5 1 IMPORTANT: After this step you should place the gazebo frame in its desired location. Make sure all corners are squared at 90 degrees.
STEP 4 Securing the Gazebo to the Ground 4.A Fasten the gazebo frame to the ground, using four spikes (31) for each support plate. Lower support frames (2) to cover support plates (3). Components 1 2 1 Ground spike (31) x 16 31 3 3 Optional Securing the Gazebo to a Concrete Floor or Wood Deck Concrete Floor: Components 1. Using a concrete drill, drill holes into the concrete floor, corresponding to the holes in support plates (3). 2.
STEP 5 Installing the Lower Roof Gable Profiles ATTENTION: DO NOT ATTEMPT TO ASSEMBLE THIS ALONE ! Components Roof gable profile(9) 2152mm x4 T - connector A (35) x4 Roof gable profile(10) Roof gable profile(11) 1540mm 942mm x4 x4 X - connector B (36) Roof gable profile(12) 942mm x4 Roof top connector (37) x4 x8 Roof Top Cover (19) x1 Screw (21) Screw (22) Screw (24) x 16 x 44 x8 Nut M6 (27) x8 Using at least three people, install the roof gables (9,10) in the following order: 2.
5.A Using screws (21), connect all eight roof top connectors (37) to roof top cover (19) as shown. 37 37 37 37 19 37 37 37 37 19 21 21 37 21 37 37 37 21 VIEW FROM BELOW 5.B Using screws (24) and nuts (27), connect roof gable profiles (9) to roof connectors (4) on top of corner profiles (1). Using screws (22), connect roof gable profiles (9) to roof top connectors (37) on the four corners of roof top cover (19).
5.C Install roof gable profiles (10). Using screws (22) connect profiles (10) to inner roof connectors (7) on profile sets (5,6)and the other end to remaining connectors (37) on roof top cover (19). 10 10 10 19 7 10 5,6 10 22 10 22 37 19 9 5.D ILLUSTRATION Attach T-connectors A (35) to underside of roof gable profiles (10), using screws (22) as shown. Attach X-connectors B (36) to underside of roof gable profiles (9), using screws (22) as shown.
STEP 6 Installing the Horizontal Roof Profiles Components Roof profile(13) 825mm Roof profile(14) 825mm x4 Corner cap(38) x 4 x4 Screw(23) Screw(22) x8 x 16 6.A Attach roof gable profiles (13,14) toT-connectors A (35) and X-connectors B (36).
STEP 7 Installing the Roof Panels and Upper Roof Profiles IMPORTANT: Gently cut on the edge of the panels on both side with knife and remove protective plastic of roof panels. Place with black surface toward the sun facing out when installing. Components black side black side black side Aluminium Composite Roof Panel (15) Aluminium Composite Roof Panel (16) x4 x4 black side Aluminium Composite Roof Panel (17) x4 Screw (26) Aluminium Composite Roof Panel (18) x 16 x4 7.
Components Roof profile(9A) 2075mm Roof profile(10A) 1520mm x4 7.B x4 Roof profile(11A) 935mm Roof profile(12A) 935mm x4 Screw(25) x 60 x4 Place roof profile (10A) on top of roof profile (10) as shown and fasten with screws (25) from below (inside gazebo). 5 Connecting the upper and lower profiles 10A 16 14 13 10 15 16 10 15 25 ATTENTION: Roof Profiles, roof panels and gables must be aligned properly VIEW FROM TOP during assembly to minimize any possibility of leaking.
7.C Fit roof panel (18) on top of roof profiles (9,12) as shown and fasten with one screw (26) from below to outer roof connector (8). 9 18 8 12 26 14 9 13 18 12 9 12 11 7.D Place roof profile (12A) on top of roof profile (12) as shown. Align both profiles.Fasten with screws(26) from below (inside gazebo).
7.E Fit roof panels(15,17) on top of roof profiles(9,10,11), fasten with screw(26) from below to outer roof connector(8). Place roof profile (9A,11A) on top of roof profile (9,11) and fasten with screws(25) from below. 5 9 13 14 10 11A 15 11 11 12 17 9 19 9 25 Positions of screws (25) from below roof.
7.F Continue in a clock-wise direction as shown, until the last two panels: 10A 9A 9A 11A 12A 12A 11A 10A 10A 11A 12 11 12A 9A 10A 9 VIEW FROM TOP 7.G Place the roof panel (17,18) on top of profiles (9,11,12) ,fasten with screw (26) from below.
7.H Place roof profile (9A,11A,12A) on top of roof profile(9,11,12) as shown, fasten with screws(26) from below(inside gazebo). 9A 12A 17 9 11A STEP 8 Installing the Plastic Caps Components Close off roof profiles (10,11,12) with plastic caps #1 (29) and roof profiles (9) with plastic caps #2 (30).
ENJOY YOUR COMPLETED GAZEBO ! 23 of 24
Gazebo GZ3D Aluminium Composite Roof Panels Assembly Instructions WARRANTY: Warranty covers damage due to manufacturing defects only. Warranty does not cover weather inflicted damage (Force Majeure) and/or damages caused by not following assembly instructions and adhering to warnings in manual. ATTENTION: Roof profiles,roof panels and gables must be aligned properly during assembly to minimize any possibility of leaking.