Operation Manual
EN-13
CONNECTION Cont’d
BLUETOOTH CONNECTION
111313
1. To connect a phone/tablet to the Soundscape, press the Enable
Bluetooth button on your remote or toggle through the source
options using the Previous Input and Next Input on the top panel.
Once the “BLUTTH” (Bluetooth) source option appears on the
LCD display a short audio notication will be heard. NOTE: The
connection process will take approximately 1 minute. If your
device has been PREVIOUSLY CONNECTED to your Soundscape
via Bluetooth, renable Bluetooth and skip step 2.
2. Enable Bluetooth on your phone/tablet and search for “Paradigm
Soundscape” on your Bluetooth device list. Select “Paradigm
Soundscape” to establish a connection. Depending on phone/
tablet you may need to change the playback device to “Paradigm
Soundscape” or it may change automatically.
Bluetooth Connection
Prev Source Next Source
Top Panel Controls
Remote Control
Enable
Bluetooth
MODE
1 To connect a phone/tablet to the Soundscape, press
the ‘Enable Bluetooth’ button on your remote or
toggle through the source options using the ‘Previous
Input’ and ‘Next Input’ on the top panel (Fig. 12).
Once the ‘BLUTTH’ [Bluetooth] source option appears
on the LCD display a short audio notification will
be heard. NOTE: The connection process will take
approximately 1 minute. If your device has been
PREVIOUSLY CONNECTED to your Soundscape via
Bluetooth, re-enable Bluetooth and skip step 2.
2 Enable Bluetooth on your phone/tablet and search
for “Paradigm Soundscape” on your Bluetooth device
list. Select “Paradigm Soundscape” to establish a
connection. Depending on phone/ tablet you may
need to change the playback device to “Paradigm
Soundscape” or it may change automatically.
WIRELESS RANGE: To ensure transmission between
your Bluetooth-enabled phone or device and the
Soundscape, there should be no more than 6 meters /
20 feet. Some situations may allow for more range.
Experiment with your equipment to determine
maximum range for desired placement.
Fig. 12