Full Product Manual

ManualsBrandsPanellift ManualsBuilding materialsDrywall Panel Hoist Storage Stand

O P E R A T O R ’ S M A N U A L

WARNI N G

Read and become familiar with this manual BEFORE operating unit.

Before operating this equipment, thoroughly read this set of instructions, make sure

you understand them, and only then follow the step-by-step directions. Failure to do

so could result in serious property damage and / or serious bodily injury.

MODEL 117

Summary of content (8 pages)

PAGE 1
OPERATOR’S MANUAL MODEL 117 WARNING Read and become familiar with this manual BEFORE operating unit. Before operating this equipment, thoroughly read this set of instructions, make sure you understand them, and only then follow the step-by-step directions. Failure to do so could result in serious property damage and / or serious bodily injury.
PAGE 2
To our valued customer, Thank you for choosing a product by Manufacturing Solutions. We are pleased that we are able to provide equipment to make your work easier. Our efforts are focused on producing the finest quality equipment of which we are capable. We make sure to spend extra time and effort on our design and production in order to reduce your time and effort spent using the product. We take pride in providing the best for our customers.
PAGE 3
CONTENTS Parts Index/ Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1 Loading up your Panellift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
PARTS INDEX A C B A: 117 Handle B: 117 Base C: 3/8 x 3/4 NC Bolt Z & 3/8 NC Nylock Nut ASSEMBLING What You’ll Need: Tools • (2) 9/16 Wrench 1. Align the holes on the square peices of the handle and 117 Base unit followed by inserting the bolts in each hole to keep the handle in place. 2. Tighten the nuts and bolts together with a 9/16 wrench.
PAGE 5
LOADING UP YOUR PANELLIFT The next peice to a�ach is the Tripod. Place it as shown above the center of the base. A�er doing so, it is important to ﬂip the latch to secure the Tripod, preven�ng it from falling. When loading your Panelli�®, place the Cradle in ﬁrst. Makes sure the Cradle is secured and res�ng on the notch properly, as shown above.
PAGE 6
SAFETY INFORMATION This product contains trace amounts of the following items which are known to cause. These chemicals are not hazerdous under product’s intended use. Please review CAS# for more information.
PAGE 7
WARRANTY PARAGON PRO MANUFACTURING SOLUTIONS INC LIMITED WARRANTY TELPRO INC products manufactured by PARAGON PRO MANUFACTURING SOLUTIONS INC are warranted to be free from defects in material and workmanship under normal use for one year from date of purchase. NOTE: The following components of the PANELLIFT® Model 439 Drywall Lift are warranted to be free from defects in material and workmanship under normal use for three years from date of purchase.
PAGE 8
Q uestions about assembly? Can’t find a part? Need some other help? Call us: 1.800.448.0822 701.775.