ESPAÑOL FRANÇAIS DEUTSCH WV-CF202 CCTV Camera WV-BF102 ENGLISH Colour CCTV Camera Before attempting to connect or operate this product, please read these instructions completely.
ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med den følgende standarder eller andre normative dokumenter i følge bestemmelserne i direktiv 89/336/EEC. Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni della direttiva CEE/89/336.
CONTENTS PREFACE ........................................................................................................................................................................ 3 FEATURES ...................................................................................................................................................................... 3 PRECAUTIONS ......................................................................................................................................
PREFACE sor having 512 horizontal pixels (picture elements) and one chip signal processor. Additionally, optional lenses with various angular of view are available to meet your needs.
PRECAUTIONS 1. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for servicing. 5. Never face the camera towards the sun. Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused. 2. Handle the camera with care. Do not abuse the camera.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS -5-
o Camera Head This adjusts the tilting angle of the camera. q DC Power Input Connector This connector is for connecting the 12V DC power supply cable. !0 Lens Holder These holders bring the picture in an upright position on the monitor screen. w Video Output Connector This connector is for connecting with the VIDEO IN connector of the monitor. !1 Panning Table This adjusts the panning angle of the camera. e Cable Exit Pass the cables through this concave when installing on the ceiling/wall.
CONNECTION Precaution: The following connections should be made by qualified service personnel or system installers.
• Power supply connection Prepare the individual conductors for clamping. Use MOLEX band tool part number 57027-5000 (for ULStyle Cable UL1015) or 57026-5000 (for UL-Style UL1007) for clamping the contacts. After clamping the contacts, push them into the proper holes in the accessory connector of this camera until they snap in place. Recommended wire gauge sizes for 12 V DC line. Copper wire size (AWG) Length of Cable (Approx.) #20 #24 #18 #22 (0.22mm2) (0.33mm2) (0.52mm2) (0.
INSTALLATION Important Notices: • The following installation should be made by qualified service personnel or system installers and should confirm to all local codes. • Be sure to use a ceiling board having enough strength to support this camera. Front/Upper Mounting the camera when you can make a hole for the cables on the ceiling/wall. When you can make a hole for the cables on the ceiling/wall where the camera to be installed, proceed as follows; 83.5mm 15mm 10mm 1.
3. Pass the cables through the cable hole. 2. Open the panel cover by using a tool, such as a screwdriver (−).
6. Mount the camera onto the ceiling/wall by fixing with the mounting screws. 4. Connect the cables as described in the previous section “CONNECTION”. Note: Before fixing with the screws, confirm the direction of the camera by checking the position of the logo “Panasonic” on the camera cover. “Panasonic” logo indicates the front (when installed on the ceiling)/upper (when installed on the wall) direction of the camera. 5. Remove the rubber cap from the camera mounting screw hole on the camera cover.
8. Attach the rubber cap into the camera mounting screw hole on the camera cover. Front/Upper 7. Close the panel cover. Make sure the panel cover is closed properly and firmly.
3. Detach the video output connector cable and the DC power input connector cable from the camera. Mounting the camera when you can not make a hole for the cables on the ceiling/wall. When you can not make a hole for the cables on the ceiling/wall where the camera to be installed, proceed as follows; 1. When you can not make a hole in the ceiling/wall to pass the cables through, cut and remove the plastic part to make the concave for cables. 4.
5. Connect the cables as described in the previous section “CONNECTION”. 6. Remove the rubber cap form the camera mounting screw hole on the camera cover. 7. Mount the camera onto the ceiling/wall by fixing with the mounting screws. Note: Before fixing with the screws, confirm the direction of the camera by checking the position of the logo “Panasonic” on the camera cover. “Panasonic” logo indicates the front (when installed on the ceiling)/upper (when installed on the wall) direction of the camera. 8.
ADJUSTMENT 2. Adjust the direction of the camera head by moving the panning table. To move the panning table, hold the camera head holder and move it. The panning table can be moved ±90° (180°). 1. Panning 1. Remove the dome cover from the camera.
2. Tilting the camera 3. Uprighting the picture The tilting angle is shown below. The camera head can be tilted ±75° (150°). Bring the picture on the monitor screen in an upright position by turning the camera head. To turn the camera head, hold the camera head and turn it. The camera head can be turned ±90° (180°). 46 ngular A ical Vert iew of V (m 75 ax .) 46 Vertical Angular of View Notes: • Uprighting the picture on the monitor screen is usually necessary. (Refer to 3. Uprighting the picture.
After adjusting the focus, attach the dome cover to the camera body. 4. Focusing Adjust the focus by turning the lens.
PREVENTION OF BLOOMING AND SMEAR , , , , , , When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming.
SPECIFICATIONS WV-CF202 Pick-up Device: Scanning Area: Scanning: Horizontal: Vertical: Synchronization: Video Output: Horizontal Resolution: Signal-to-Noise Ratio: Minimum Illumination: Angular Field of View: Electronic Light Control: White Balance: Ambient Operating Temperature: Ambient Operating Humidity: Power Source: Dimensions: Weights: 512 (H) x 582 (V) pixels, Interline Transfer CCD 3.61 (H) x 2.72 (V) mm (Equivalent to scanning area of 1/4” pick-up tube) 625 lines / 50 fields / 25 frames 15.
WV-BF102 Pick-up Device: Scanning Area: Scanning: Horizontal: Vertical: Synchronization: Video Output: Horizontal Resolution: Signal-to-Noise Ratio: Minimum Illumination: Angular Field of View: Electronic Light Control: Ambient Operating Temperature: Ambient Operating Humidity: Power Source: Dimensions: Weights: 512 (H) x 582 (V) pixels, Interline Transfer CCD 3.61 (H) x 2.72 (V) mm (Equivalent to scanning area of 1/4” pick-up tube) 625 lines / 50 fields / 25 frames 15.625 kHz 50 Hz Internal 1.
STANDARDACCESSORIES Rubber Cap................................................................................1 Connector for Power...................................................................1 OPTIONAL ACCESSORIES Lenses...............
Matsushita Electric Industrial Co., Ltd. Central P.O.
