Operating Instructions Color CCTV Camera Model No. WV-CW334S, WV-CW334SE WV-CW364S, WV-CW364SE Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
For U.S. and Canada: WV-CW334S, WV-CW364S For Europe and other countries: WV-CW334SE, WV-CW364SE WARNING: • This apparatus must be earthed. • Apparatus shall be connected to a mains socket outlet with a protective earthing connection. • The mains plug or an appliance coupler shall remain readily operable. • All work related to the installation of this product should be made by qualified service personnel or system installers.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC.
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Clean only with dry cloth. 6) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 7) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8) Do not defeat the safety purpose of the polarized or grounding-type plug.
Limitation of liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Contents Important safety instructions.......................................................................................................... 4 Limitation of liability........................................................................................................................ 5 Disclaimer of warranty.................................................................................................................... 5 Preface.......................................................................
Preface This product is surveillance color CCTV camera equipped with a 1/3 type CCD solid-state image sensor with 768 horizontal pixels (NTSC), 752 horizontal pixels (PAL). This camera can be mounted on a ceiling or a wall without any difficulty. Features This product is provided with the adaptive black stretch function, high resolution of 540 TV lines (horizontal), and minimum illuminance of 0.6 lx (C/L), 0.05 lx (B/W) for WV-CW364S, 0.4 lx (B/W) for WV-CW334S, (F1.
Precautions The following points as well as the contents of "Warning" and "Caution" shall be observed. Refer installation work to the dealer. Installation work requires technique and experiences. Otherwise injury, or damage to this product may result. Be sure to consult the dealer. Install this product high enough to ensure that people don't hit their heads. Failure to observe this may cause a drop resulting in injury or accidents. Do not insert any foreign objects.
[Precautions for use] This product has no power switch. When turning off the power, turn off a circuit breaker. Cleaning this product body Turn the power off when cleaning this product. Do not use strong abrasive detergent when cleaning this product. Otherwise, it may cause discoloration. To keep on using with stable performance Parts of this product may deteriorate and it may shorten the lifetime of this product when using in locations subject to high temperatures and high humidity.
Precautions for installation The following points as well as the contents of "Warning" and "Caution" shall be observed. Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Installation work shall be performed in accordance with the technology standard of the electric installation. This product is designed to be installed under eaves. Keep the product out of direct sunlight.
Screw tightening • The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area. • Do not use an impact driver. Failure to observe this may cause overtightening and consequently damage to the screws. • When a screw is tightened, make the screw at a right angle to the surface. After tightening the screws or bolts, perform visual check to ensure tightening is enough and there is no backlash.
Major operating controls and their functions w Video output cable q Power cord !5 Inner dome e Dome cover !3 Dip switch !2 Heater output connector 1 2 3 4 !1 Camera fixing screw * This illustration shows the camera without the inner dome.
q Power cord Supplies 24 V AC or 12 V DC from an external power source. w Video output cable Transmits composite video signals. If this unit is connected to the multiplex unit, the multiplexed VD2 that is prioritized over INT is automatically selected. e Dome cover r Panning lock screw [LOCK] Fixes the panning table. t Panning table Rotate this table to adjust the panning angle of the camera. y Tilting table Adjusts the tilting position of the camera.
Adaptive black stretch selector [B.S.]: ON (default): Corrects the dark area of an object automatically to lighten it. OFF: Does not compensate. Note: • When set to "ON", noise may be increased in the dark area of the object. In addition, darkness and brightness may be emphasized in the vicinity of the boundary between the dark and bright areas. Backlight compensation selector [BLC]: ON: Compensates the background automatically if it is brighter than the object.
Preparations When installing the camera on a wall or a ceiling, there are two methods as specified below. (+ Next page) • Using a two-gang junction box • Using the mounting base Refer to all work related to the installation of this product to qualified service personnel or system installer. • The mounting base is supplied. Use the screws supplied with this product.
Using a two-gang junction box • When the camera is installed using the two-gang junction box, mount the camera attachment (accessory) to the embedded box installed on the wall or ceiling as a first step. [Mounting position on wall or ceiling] 46 mm {1-13/16 inches} Two-gang junction box FRO NT TOP FRON T TOP 83.5 mm {3-9/32 inches} Camera attachment (accessory) Note: • For wall mounting: Installation shall be performed in such a manner that "MTOP" of the camera attachment faces upward.
z Install the mounting base on the wall/ceiling. ø27 mm {1-1/16 inches} Cable access hole (A For use of the hole) 51 mm {2 inches} Mounting base A B A Center of mounting base B B A Female thread for conduit (For use of the hole A) (For use of the hole B) 85 mm {3-11/32 inches} 138 mm {5-7/16 inches} 138 mm {5-7/16 inshes} 85 mm {3-11/32 inches} Note: • Only the same type of holes, A or B, shall be used for mounting.
x Previously run the cables from the wall or ceiling through the cable access hole. c Mount the attachment onto the mount bracket. Recommended tightening torque: 0.78 N·m {0.58 lbf·ft} FRO NT TOP Camera attachment Note: • For wall mounting: Installation shall be performed in such a manner that "MTOP" of the camera attachment faces upward. (Except for the case of connecting the conduit from the top.
Camera installation z Mount the camera. LOCK OPEN q Connect the power cord and the video output cable. (+ page 28) w Align the "OPEN" mark of the camera with the protrusion of the camera attachment. e Engage the attachment mounting screw of the camera with the camera mounting hole of the camera attachment and rotate the camera in the direction of the arrow to the "LOCK" position to secure the camera to the camera attachment without any backlash.
LO C K OP EN q Attach the camera onto the camera attachment while aligning the "OPEN" mark of the camera with the projection of the camera attachment. LO CK OP EN Projection Important: • When mounting the camera body, cables shall be run between the camera attachment and mounting base as indicated by the arrow in the illustration. * Cable running as indicated by the arrow is an example. Cable running shall be varied with installation environment.
LO CK OP EN w Engage the attachment mounting screw of the camera with the camera mounting hole of the camera attachment and rotate the camera in the direction of the arrow to the "LOCK" position to secure the camera to the camera attachment without any backlash. LO CK OP EN Projections e Connect the power cord and the video output cable at the side of the mounting base. (+ page 28) Apply waterproof treatment to the connected section. (+ page 26) Make cable connections.
t Mount the supplied base cover on the mounting base. Important: • To prevent the cables from being caught when the base cover is attached, keep the cables inside the cable guide. Base cover y Use the bit for tamperproof screw (accessory) to tighten the fixing screws provided on both sides of the base cover. (Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}) x Remove the dome cover from the main body by loosening the three fixing screws.
c Secure the camera to the bracket with the camera fixing screw (red, 1 position). Important: • The camera fixing screw shall be securely tightened. Otherwise, water exposure may cause damage or malfunction of camera, or camera dropping may result in injury. (Recommended tightening torque: 0.78 N·m {0.
Adjust the camera z Pan, tilt and azimuth adjustment Important: • Do not touch the iris motor. Failure to observe this may cause trouble. • Do not hold the camera by the lens unit when adjusting panning, tilting, or azimuth. q Rotate the panning table to adjust the panning position of the camera. (Range: 320°) • The adjusting range is from +180 ° (clockwise) to –140 ° (counterclockwise).
Note: • When the zoom lock knob is adjusted to the WIDE side and the tilt angle is approx. ±75 °, 1/3 part of the screen may be hidden. Important • Tighten the panning table lock screw and tilting lock screw. (Recommended tightening torque: 0.59 N·m {0.44 lbf·ft}) e Rotate the azimuth adjuster to adjust the azimuth angle of the image (Range: ±100°). q Loosen the zoom lock knob and move the knob between TELE and WIDE to obtain the appropriate angle of view. Tighten the zoom lock knob.
Waterproof treatment for the cable joint sections Adequate waterproof treatment is required for the cables when the camera with exposed cables is installed by means of the mounting base or it is installed under the eaves. The camera body is waterproof, but the cable ends are not waterproof. Be sure to use the supplied butyl tape at the connection parts of the power cord and video output cable to apply waterproof treatment in the following procedure.
Important: • If open wiring is conducted, be sure to use conduits and run the cables inside the tubes to protect the cables from direct sunlight. • When the conduit is connected at the lateral or bottom position, either of the arrow marks on the bracket shall be the top position. • When the conduit is connected from the top, the arrow mark on the attachment shall be either of the right or left position.
Make a connection Cautions: • FOR UL LISTED MODEL(S), ONLY CONNECT THIS TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY. • Be sure to connect the grounding lead to the GND terminal. Power cord BNC connector Brown (Live) Blue (Neutral) To 24 V AC/12 V DC* power supply Green/Yellow (GND) To GND (only for 24 V AC) * When using 12 V DC power supply, the optional heater unit is unavailable.
• Cord length and wire gauge 24 V AC The recommended cord length and copper wire size are shown in the table for reference. The voltage supplied to the camera should be between 19.5 V AC and 28 V AC. Recommended wire gauge for 24 V AC line. #22 #20 #18 Copper wire size #24 (AWG) (0.22 mm2) (0.33 mm2) (0.52 mm2) (0.83 mm2) Length of m 20 30 45 75 cable (approx.) feet 66 100 150 250 12 V DC The recommended resisance and copper wire size are shown in the table for reference.
Optional Heater Unit WV-CW5H (option) Installing the heater unit enables the camera to operate in a low-temperature environment below –30 °C {–22 °F}. The heater turns on automatically when the temperature inside the camera drops below +10 °C {50 °F} and turns off when the temperature rises. A small fan inside the unit will minimize condensation on the surface of the dome cover caused by changes in ambient temperature unless temperatures change too rapidly.
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom No image displayed Blurred image Cause/solution • Are the power cord and coaxial cable connected appropriately? → Check whether the connection is appropriately established. • Is the adjusting monitor connected ? → Check whether connection is established.
Specifications • Basic Power source: Power consumption: NTSC: 24 V AC 60 Hz, 12 V DC PAL: 24 V AC 50 Hz, 12 V DC 24 V AC: 2 .9 W (without heater unit) 13.1 W (with heater unit) 12 V DC: 250 mA* Ambient operating temperature: With Heater**: –30 °C to 50 °C (–22 °F to 122 °F) Without Heater: –10 °C to 50 °C (14 °F to 122 °F) Ambient operating humidity: Less than 90 % (no condensation) Water resistance: Camera: IEC60529 (IP66)*** Shock resistance: 50J, IEC60068-2-75 Video output: 1.
Switch Function: Simple day/night mode selector for WV-CW334S, day/night mode selector for WV-CW364S (ON/OFF), adaptive black stretch selector (ON/OFF), backlight compensation selector (ON/ OFF), white balance selector (ATW/AWC) • Lens Type: 3.6x variable focal lens Focal length: 2.8 mm - 10.0 mm F number: F1.3 (WIDE) - F3.1 (TELE) Focus range: ∞ - 1.2 m Angle of view: WV-CW364S Horizontal: 100.50 ° (WIDE) - 27.39 ° (TELE) Vertical: 73.51 ° (WIDE) - 20.
Standard accessories Installation Guide (this book) ........................................ 1 pc. Warranty card (NTSC models only) .............................. 1 pc. The following parts are used during installation procedures. Base cover .................................................................. 1 pc. Mounting base ............................................................ 1 pc. Fixing screw for mounting base ................................... 5 pcs. (incl. 1 spare screw) Camera attachment . .
Optional accessories Dome cover Heater unit Ceiling mount bracket WV-CW4S WV-CW5H WV-Q169 35
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.