Installation Guide Color CCTV Camera Model No. WV-CF504, WV-CF504E Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
WARNING: • This apparatus must be earthed. • Apparatus shall be connected to a mains socket outlet with a protective earthing connection. • The mains plug or an appliance coupler shall remain readily operable. • To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture. • The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC.
Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Limitation of liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Contents Important safety instructions.......................................................................................................... 4 Limitation of liability........................................................................................................................ 5 Disclaimer of warranty.................................................................................................................... 5 Preface.......................................................................
Preface This product is a 1/3 type CCD color CCTV camera. Connection of this product to a video monitor allows users to use this product as a monitoring camera. This is a model with x2 varifocal lens. Ceiling mount bracket are optional. Features SUPER-D5 (super dynamic function) Integration of SUPER-D5 into the CCD and signal processing circuit has achieved approximately 128 times higher dynamic range as compared with conventional camera.
Intelligent VMD (i-VMD) functions of motion detection and object abandonment/removal detection The motion and abandonment/removal of an object are detectable. The states of covering the camera with a cloth, a cap or others and changing the camera direction notably can be detected (Scene change detection).
Precautions The following points as well as the contents of "Warning" and "Caution" shall be observed. Refer installation work to the dealer. Installation work requires technique and experiences. Otherwise injury, or damage to this product may result. Be sure to consult the dealer. This product shall be installed in a vibration-free place. Failure to observe this may cause screws and bolts to be loosened and consequently to fall resulting in injury.
[Precautions for use] This product is designed to be used indoors. This product is not operable outdoors. This product has no power switch. When turning off the power, turn off a circuit breaker. To keep on using with stable performance Parts of this product may deteriorate and it may shorten the lifetime of this product when using in locations subject to high temperatures and high humidity.
Precautions for installation The following points as well as the contents of "Warning" and "Caution" shall be observed. Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Installation work shall be performed in accordance with the technology standard of the electric installation. This product is designed to be used indoors. This product is not operable outdoors.
mounting area and the total weight of objects to be mounted. Screw tightening • The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area. • Do not use an impact driver. Failure to observe this may cause overtightening and consequently damage to the screws. • When a screw is tightened, make the screw at a right angle to the surface.
Major operating controls and their functions q Video output cable w Power cord !8 Inner dome e Dome cover !5 Up button [(UP)] !4 Down button [(DOWN), ABF1] !3 Setting button[(SET), ABF2/MENU] !2 ABF operation indicator !6 Left button [(LEFT), NEAR] !7 Right button [(RIGHT), FAR] * This illustration shows the camera without the inner dome.
q Video output cable w Power cord e Dome cover r Panning table Rotate this table to adjust the panning angle of the camera. t Monitor output connector Connects the monitor for adjustment to this output connector. y Tilting lock screws (left and right) Fixes the tilting position. u Tilt adjusting table Adjusts the azimuth angle of the image. i Camera fixing screw Fixes the attachment on the camera body. o Panning lock screw [LOCK] Fixes the panning table.
Preparations When installing the camera on a wall or a ceiling, there are four methods as specified below.
Method of camera installation Using the two-gang junction box Mount the camera on the two-gang junction box by fixing 4 screws (locally procured) (☞ page 15). 46 mm {1-13/16 inches} Camera attachment 83.5 mm {3-9/32 inches} Two-gang junction box Note: • For mounting on the wall, mount the attachment with the dent facing upward. • For installation on the ceiling, the model No. will be indicated on the opposite side of the dent of the attachment. Make sure the direction for installation.
Using the ceiling mount bracket WV-Q175 (option) It is possible to reduce the exposed portion of the camera body using the ceiling mount bracket (option). Refer to WV-Q175 Operating Instructions or "Camera Installation" (☞ page 20) for how to mount the camera. Using the ceiling mount bracket WV-Q105 (option) (PAL model only) Refer to WV-Q105 Operating Instructions and "Camera Installation" (☞ page 20) for how to mount the camera in case of using the ceiling mount bracket (option).
Detaching the dome cover Important: • After removal, retain the dome cover fixing screw so as not to lose. The screw is required when attaching the dome cover. (☞ Page 24) • Remove the cover film from the dome section of the dome cover after the installation is complete. Do not touch the dome section by hand directly after removing the cover film. z Remove the dome cover fixing screw (M3, step screw, x1).
Using the side cable access hole When installing the camera directly on the ceiling or wall with cables exposed, cut out a portion of the dome cover to open a cable access hole. Side cable access hole The above procedure is also required when mounting the camera using the ceiling mount bracket WV-Q175 (option).
Camera installation z Mount the camera. a. Connect the power cord and the video output cable (+ page 26). b. Align the single rib on the camera with the protrusion on the camera attachment. c. Engage the camera’s attachment mounting hooks with the mounting holes on the camera attachment, and then rotate the camera in the direction of the arrow to secure the camera to the camera attachment without any backlash.
x Secure the camera to the camera attachment with the camera fixing screw. (Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}) Camera fixing screw c Remove the inner dome from the main body. Press the parts with the "PUSH" indication. v Remove the screw (blue, 1 position) for transport protection with a Phillips screw driver.
Adjust the camera z Be sure to view the monitor for adjustment when the camera angle is adjusted. Connect the monitor for adjustment (e.g. a small LCD) to the monitor output connector, and adjust the camera angle. When determining the camera angle, repeat fine follow the adjusting procedure of q, w, and e shown below.
x Adjusts the focus. Focus adjustment shall be performed when Focus lock knob camera angle adjustment are performed. Adjust the focus by following the adjusting procedure of q, w, and e shown below. q Loosen the zoom lock knob and move the FAR knob between TELE and WIDE to obtain Zoom lock knob the appropriate angle of view, and then TELE tighten the zoom lock knob. w Loosen the focus lock knob, make coarse adjustment of the focus, and then tighten the focus lock knob.
v To perform fine adjustment of the back focus after the ABF operation indicator goes off and automatic back focus is adjusted, use the right or left button. Note: • No operation for 10 seconds or more automatically clears the focus position indicator. • To change the angle of view by moving the zoom adjustment ring, also move the focus lock knob to adjust the focus. • The originally adjusted focus may be slightly off depending on the iris state resulting from the focal depth of the lens.
w Reinstall the dome cover fixing screw. Dome cover fixing screw (M3, step screw) Important: • Attach the inner dome in accordance with the lens direction to not to change the lens direction. • Check if the tabs of the inner dome are firmly fit. • Remove the cushioning (pink sheet) from the inside of the dome and the protection sheet from the outside of the dome. Note: • Defocus may be caused by the reinstalled dome cover.
Make a connection Cautions: • FOR UL LISTED MODEL(S), ONLY CONNECT THIS TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY. • Be sure to connect the grounding lead to the GND terminal.
• Cord length and wire gauge 24 V AC The recommended cord length and copper wire size are shown in the table for reference. The voltage supplied to the camera should be between 19.5 V AC and 28 V AC. Recommended wire gauge for 24 V AC line. #22 #20 #18 Copper wire #24 size (AWG) (0.22 mm2) (0.33 mm2) (0.52 mm2) (0.83 mm2) Length of m 20 30 45 75 cable (approx.) feet 66 100 150 250 12 V DC The recommended resisance and copper wire size are shown in the table for reference.
About the setup menus Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area. Refer to the operating instructions (PDF) for further information.
Setup item SPECIAL CHROMA GAIN AP GAIN PEDESTAL HUE*1 PIX OFF CAMERA RESET SER.NO. LANGUAGE Description Adjusts the chroma level. Adjusts the aperture level. Adjusts the pedestal (brightness) level. Adjusts the chroma phase (hue) level. Corrects image defects such as flaws. Restores the settings in the setup menu to the default settings. Displays the serial number of this unit. Selects a language to be used in the setup menu.
Screenshot 2 The setup mode changes to "ENABLE", and the setup menu becomes ready to be set. MODEL WV-CF504 CAMERA ID OFF CAMERA SYSTEM BACK-FOCUS SPECIAL LANGUAGE END Step 3 Move the cursor to the item to be set, and press the setting button. SETUP ENABLE Screenshot 3 The selected setup screen in the setup menu appears on the screen.
Screen transition diagram Top screen "CAMERA ID" screen MODEL WV-CF504 CAMERA ID OFF CAMERA SYSTEM BACK-FOCUS SPECIAL LANGUAGE END **CAMERA ID** 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$ SPACE POSI RET TOP END RESET ................
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom No image displayed Blurred image Cause/solution • Are the power cord and coaxial cable connected appropriately? → Check whether the connection is appropriately established. • Is the adjusting monitor connected ? → Check whether connection is established.
Specifications • Basic Power source: Power consumption: Ambient operating temperature: Ambient operating humidity: Video output: Dimensions: Mass: Finish: NTSC: 24 V AC 60 Hz, 12 V DC PAL: 24 V AC 50 Hz, 12 V DC 24 V AC: 3 .4 W 12 V DC: 280 mA –10 °C to +50 °C {+14 °F to +122 °F} Less than 90 % (no condensation) VBS: 1.0 V [p-p]/75 Ω, NTSC/PAL composite, BNC connector ø151 mm x 129 mm (H) {ø5-15/16 inches x 5-1/16 inches (H)} Main body: 0.9 kg {2.0 lbs} (including camera attachment 60 g {0.
Dynamic range: Monitor output: Functions: Camera title: Light control mode setting: Super Dynamic 5: Electronic shutter speed: NTSC: 52 dB typ. (Super Dynamic 5 ON) PAL: 54 dB typ.(Super Dynamic 5 ON) VBS: 1.
Standard accessories CD-ROM*1 .................................................................. 1 pc. Installation Guide (this book) ........................................ 1 pc. Warranty card*2 ........................................................... 1 pc. *1 The CD-ROM contains the operating instructions (PDF). *2 NTSC model only The following parts are used during installation procedures. Camera attachment . ................................................... 1 pc.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
