Operating Instructions

8
Remote Controller buttons and display
Display
1 Mode selection
AUTO
• Depending on the preset outdoor
temperature, the system selects
HEAT or *
1
COOL operation mode.
Auto Heat Auto Cool
*
1,
*
2
COOL • The fan coil unit is either turned
ON or OFF.
• The mono bloc unit provides
cooling to the system.
AUTO
+ TANK
• Depending on the preset outdoor
temperature, the system selects
HEAT + TANK or *
1
COOL + TANK
operation mode.
Auto Heat Auto Cool
*
1,
*
2
COOL
+ TANK
• The mono bloc unit provides
cooling to the system.
• The system controls the booster
heater in the water tank.
HEAT
• The panel/floor HEAT operation is
either turned ON or OFF.
• The mono bloc unit provides heat
to the system.
TANK • The water tank is either turned
ON or OFF.
• The mono bloc unit provides heat
to the water tank.
HEAT
+ TANK
• The mono bloc unit provides heat
to the water tank and the system.
• This mode can be selected only
when the water tank is installed.
* The direction icons point to the currently
active mode.
• Room operation / Tank operation.
• Deice operation.
2
Operation icons
The status of operation is displayed.
Icon will not display (under operation OFF screen) whenever operation is OFF except weekly timer.
Holiday operation status Weekly Timer operation status Quiet operation status
Zone: Room Thermostat
→Internal sensor status
Powerful operation status
Demand Control or
SG ready or SHP status
Room Heater status Tank Heater status Solar status
Bivalent status
(Boiler)
2 43
1
5
6
7
*1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.
*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).
ACXF55-14600_FC0817-0.indb 8ACXF55-14600_FC0817-0.indb 8 7/19/2017 2:05:33 PM7/19/2017 2:05:33 PM