Operating Instructions

How to Use Menu Functions
34
Menu Item Adjustments / Configurations (alternatives)
Setup
Link Settings
Standby Power Save
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption [Off] / [On] (p.89)
t
This function is available when [VIERA Link] is set to [On] and [Power off Link] is set
to [On].
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p.89)
t
This function is available when [VIERA Link] is set to [On].
Download
Downloads channel, language, country / region settings to a Q-Link or VIERALink
compatible equipment connected to the TV
t
DVB-C channel settings cannot be downloaded.
Child Lock Locks a channel / AV input to prevent access to it (p.47)
DVB-C Tuning Menu
Favourites Edit Creates list of favourite DVB-C channels (p.40)
Channel List Skips the unwanted DVB-C channels or edits DVB-C channels (p.41)
Auto Setup Automatically sets the DVB-C channels supplied (p.38)
Manual Tuning Sets the DVB-C channels manually (p.42)
Update Channel List Updates DVB-C Channel List while keeping your settings (p.42)
Favourite Network Selects your favourite network for each broadcasters (only available in some countries)
New Channel
Message
Selects whether to give a notification message when a new DVB-C channel is found
[Off] / [On] (p.42)
Service Replacement
Set to [On] to enable a message to switch to the available service (only available in
some countries) [Off] / [On]
Signal Condition Checks the DVB-C signal condition (p.42)
Attenuator Automatically reduces the DVB-C signal to avoid the interference [Off] / [On] (p.42)
Add TV Signal
Adds the TV mode
t
This function is available if you skip any modes to tune in [Auto Setup] for first using
the TV.
t
To operate, refer to the “Auto Setup” operations for first using the TV (p.12,13).