Operating Instructions

English
12
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Accessories (wall-hanging parts)
Spacer nut (2)
 Preparation
A
Attach the spacer nut
When changing to installation with pedestal, remove the
spacer nut.

To remove the spacer nut, use a spanner or the like.

Holes for wall-hanging bracket installation
Rear of the TV
a
b
55-inch model
a: 400 mm
b: 300 mm
65-inch model
a: 400 mm
b: 400 mm
(View from the side)
A
1
2
Depth of screw
1: Upper side
minimum: 8 mm
maximum: 13 mm
2: Lower side
minimum: 11 mm
maximum: 39 mm
Diameter of screw
M6
Screw for fixing the TV onto the
wall-hanging bracket (not supplied
with the TV)
Warning

Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit’s performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.

Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.

Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.

Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.

To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.