Operating Instructions

- 95 -
■ DVB-via-IP (DVB-C)
1. Select Scan Mode / Network ID / Frequency / Symbol Rate / Modulation
with / and set with / or Numeric buttons.
●
Normally set Symbol Rate to Auto.
2. Select Start scan with
/ and press OK to search.
■ DVB-via-IP (DVB-T)
1. Select Frequency / Bandwidth / Modulation / FEC / Service ID with /
and set with
/ or Numeric buttons.
2. Select Start scan with / and press OK to search.
= Note =
●
For DVB-via-IP connection
Functions > DVB-via-IP > DVB-via-IP client connection
●
Not valid when Client Settings is set to Multicast Environment (DVB-via-IP)
Update Channel List
By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
●
The channel list is updated while keeping your settings in Favourites Edit,
Channel List, Child Lock, etc.
●
Depending on the signal condition, the update may not work properly.
●
To update DVB-S channels, set Search Mode and Scan Mode before
updating.
1) Select Search Mode / Scan Mode with
/ and press OK to access.
2) Set each item with
/ and press OK to store.
3) After settings, select Start scan with
/ and press OK to search.
= Note =
●
Not valid when Client Settings is set to Multicast Environment (DVB-via-IP)