Specification Sheet

65-inch class Full High Definition Plasma Display
TH-65PF30U
PMS06/30/20111/4© Panasonic Corporation 2011
Product specification
(design and specification subject to change without notice)
LAN RJ45 10 BASE-T/100 BASE-TX, Compatible with PJ Link
On Mode Average Power Consumption
*2
■DISPLAY
Screen Size (Diagonal) 64.7-inch (1,645 mm)
Aspect ratio 16:9
Effective Display Area (WｘH ) 56.4" x 31.7" (1,434 x 806 mm)
Number of pixels (HｘV) 1,920 x 1,080 pixels (1 pixel=3cells for R, G and B)
Pixel Pitch (HｘV) 0.747 x 0.747 mm
Contrast Ratio 5,000,000 :1
Gradation
6,144 steps (equivalent)
■CONNECTION TERMINAL
■CONTROL TERMINAL
VIDEO IN BNC x 1 1.0 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA x 1 set
0.5 V [rms]
COMPONENT/RGB IN BNC x 3 Y/G : with sync 1.0 V [p-p] (75 Ω)
B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA x 1 set
0.5 V [rms]
HDMI IN HDMI TYPE A connector x 1
DVI-D IN
DVI-D 24pin x 1
AUDIO IN
M3 jack x 1 (Common use with PC)
0.5 V [rms]
0.5 V [rms]
PC IN MINI D-SUB 15pin x1 (Female) Y/G
: with sync 1.0 V [p-p] (75 Ω)
Plug & Play (VESA DDC 2B) B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
HD/VD
: 1.0
~
5.0 V [p-p] (high impedance)
AUDIO IN M3 jack x 1 (Common use with DVI-D)
SERIAL D-SUB 9pin x 1 (EXTERNAL CONTROL TERMINAL), RS-232C Compatible
■ELECTRICAL
Power Requirements 110-127 V AC, 50 Hz/60 Hz
Power Consumption 555 W
420 W
Power off condition 0.2 W
Stand-by condition Save ON 0.4 W, Save OFF 0.7 W
■SOUND
Audio Output 8Ω, 20 W [10 W + 10 W] (10 % THD)
■MECHANICAL
Dimensions (W x H x D) 61.2" x 36.5" x 3.9" (1,554 × 925 × 99 mm)
Carton Dimensions (W x H x D) 66.9" x 44.5" x 15.8" (1,700 x 1,130 x 400 mm)
Weight approx. 132.3 lbs. (60.0 kg)
Gross weight approx. 167.6 lbs. (76.0 kg)
Cabinet Color Black
■ENVIRONMENTAL
Operating environment Temperature: 32 F to 104 F (0 ℃ to 40 ℃)
Humidity
: 20 % to 80 % (Non condensation)
Altitude : 0 to 9,100 feet (0 to 2,800 m)
Storage environment Temperature: -4 F to 140 F (-20 ℃ to 60 ℃)
Humidity
: 20 % to 90 % (Non condensation)
Altitude : 0 to 10,800 feet (0 to 3,300 m)
■STANDARD (CERTIFICATIONS)
SAFETY REGULATIONS UL60065, CAN/CSA-22.2 No 60065:03, NOM approval
RADIATION REGULATIONS FCC Part 15 Class-B, ICES-003
■REMOTE CONTROL TRANSMITTER
Power Requirements DC 3 V (2 x AA Size batteries)
Operation distance approx. 23 ft (7 m) in front of plasma display
Weight approx. 3.5 oz (100 g) including batteries
- AC power cord - Operating instruction book - CD-ROM (Operating instruction)
- Remote control transmitter - Batteries - Clamper x 1 - Ferrite core x 2
*2: Based on IEC 62087 Ed.2 measurement method.
INCLUDED ACCESSORIES
885170043268UPC Code
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
without sync 0.7 V [p-p] (75 Ω)
Panel Life
*1
approx. 100,000 hours
*1: Guideline operating hours before the panel brightness is reduced to half when the panel is used to display motion pictures in the Standard mode.
Afterimages (burned-in images) and malfunctions are not taken into consideration.
*2: An optional 3D IR Transmitter and 3D Eyewear are required for viewing 3D images.
Full HD 3D Full HD 3D Ready
*2
3D shutter out M3 jack x 1 (for 3D IR Transmitter)
DC 8V out for 3D IR Transmitter Center Plus for EIAJ 4 mm Plug
Function Slot:SLOT 2.0 1 (Vacant)