AV20U.book 1 ページ 2003年2月12日 水曜日 午後6時16分 R SD Multi AV Device Operating Instructions Model No. SV-AV20U Before use, please read these instructions completely. For USA assistance. please call:1-800-211-PANA(7262) or send e-mail to:consumerproducts@panasonic.com For Canadian assistance. please call:1-800-561-5505 or visit us at www.panasonic.
AV20U.book 2 ページ 2003年2月12日 水曜日 午後6時16分 Before opening the CD-ROM package, please read the following. End User License Agreement You (“Licensee”) are granted a license for the Software defined in this End User License Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
AV20U.book 3 ページ 2003年2月12日 水曜日 午後6時16分 Contents End User License Agreement ......... 2 Information for Your Safety ............. 4 Introduction ..................................... 7 Preparation Standard Accessories ..................... 8 Optional Accessory ......................... 8 Controls and Components .............. 9 Power Supply................................ 10 Inserting a Memory Card .............. 11 Attaching the Hand Strap.............. 11 Using the LCD Monitor .................
AV20U.book 4 ページ 2003年2月12日 水曜日 Indications .....................................44 Notes & Precautions......................46 Notes and Hints.............................49 Before Requesting Service............57 Specifications ................................59 Limited Warranty (For U.S.A. Only)...........................60 Customer Services Directory (For U.S.A. Only)...........................62 Spanish Quick Use Guide/ Guía española para el uso rápido Alimentación eléctrica ...................
AV20U.book 5 ページ 2003年2月12日 水曜日 午後6時16分 ≥Injury or material damage resulting from any kind of use that is not in accordance with the operating Instructions are the sole responsibility of the user. ≥Please note that the actual controls and components, menu items, etc. of your SD Multi AV Device may look somewhat different from those shown in the illustrations in these Operating Instructions.
AV20U.book 6 ページ 2003年2月12日 水曜日 午後6時16分 FCC Note: (U.S. only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AV20U.book 7 ページ 2003年2月12日 水曜日 午後6時16分 Introduction This SD Multi AV Device can record MPEG4 moving pictures, still picture and voice data. Additionally, it can play back a high quality music file of the MPEG2AAC and MP3 format (Records files with the supplied SD- Jukebox Ver.3.0). And using the viewer software SD-MovieStage Ver.2.0 (supplied accessory), the MPEG4 moving picture data can be edited on the personal computer.
AV20U.book 8 ページ 2003年2月12日 水曜日 午後6時16分 6 Hand Strap (VFC3803) (l 11) 7 CD-ROM (l 34) USB Driver, SD-MovieStage Ver.2.0, SD-Jukebox Ver.3.0, Adobe Acrobat Reader (VFF0177) Preparation Standard Accessories 1 AC Adaptor (VSK0626) (l 10) ≥Supplies power to the SD Multi AV Device. CAUTION: This unit will operate on 110/120/220/ 240 V AC. An AC plug adaptor may be required for voltages other than 120 V AC.
AV20U.
AV20U.book 10 ページ 2003年2月12日 水曜日 午後6時16分 Power Supply ª Using AC Adaptor 1 2 Connect the AC Adaptor to AC Main socket. Connect the DC Input Lead to the [DC IN 4.8V] socket on the SD Multi AV Device. 1 DC IN 4.8V 2 THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. ª Charging the Battery 1 2 3 4 5 While holding the [ ] part, slide it to remove the Battery Compartment Cover.
AV20U.book 11 ページ 2003年2月12日 水曜日 午後6時16分 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Inserting a Memory Card 1 An SD Memory Card can be used for this SD Multi AV Device.
AV20U.book 12 ページ 2003年2月12日 水曜日 午後6時16分 1,2 Using the LCD Monitor Record and play the video image while viewing the LCD Monitor. 1 2 1 3 Put your finger on the groove 1 to open the LCD Monitor. Adjust the LCD Monitor angle according to the desired recording/playing angle. ≥The LCD Monitor can rotate up to the angles illustrated. 1 : Up to 120° maximum 2 : Up to 180° maximum 3 : Up to 90° maximum 2 Using the Earphones 1 Plug the Earphone Terminal into the [ terminal.
AV20U.book 13 ページ 2003年2月12日 水曜日 午後6時16分 Turning the Power On/ Selecting Operation Modes 1 Select a desired mode on the mode selection screen. 1 2 3 OFF PLAY REC Set the Power/Mode Switch to [PLAY] or [REC]. ≥The SD Multi AV Device is turned on. Set to [REC] to select Record Mode. Set to [PLAY] to select Play Mode. Press the [MODE] Button to select a Operation Mode. ≥Every time the [MODE] Button is pressed, the Operation Mode changes as followed.
AV20U.book 14 ページ 2003年2月12日 水曜日 午後6時16分 Using the Menu Screen Allows the functions usable in the selected mode to be set from the menu. 1 2 3 4 5 6 1 Select a desired mode. (l 13) OFF PLAY REC Press the [MENU] Button. ≥The menu in the selected mode is displayed. Press the UP/DOWN side of the Multifunction Button to select a desired item. Press the [1 SET] Button.
AV20U.book 15 ページ 2003年2月12日 水曜日 List of Menus The figures of the Menus are for explanation purposes only, and they are different from the actual Menus. 午後6時16分 1 ª REC MODE 1 2 3 Still Picture Record Menu Picture quality [QUALITY] (l l 20) Flash setting [FLASH] (l 20) Beep sound [BEEP SOUND] When it is set to [ON], beeps for confirmation or alarm.
AV20U.book 16 ページ 2003年2月12日 水曜日 午後6時16分 ª PLAY MODE 1 2 3 4 Still Picture Playback Menu Beep sound setting [BEEP SOUND] (l l 15) Card editing [CARD EDITING] 1 Display setup [DISPLAY SETUP] (l l 15) P.Slide show [P.
AV20U.book 17 ページ 2003年2月12日 水曜日 Setting Date and Time At the time of purchase of the SD Multi AV Device, the date and time are not set ([PRESS MENU TO SET CLOCK] is displayed). First, set the date and time, then use the SD Multi AV Device. 1 2 3 4 5 6 7 Set the Power/Mode Switch to [REC]. 午後6時16分 1 2 PLAY OFF REC MENU 3 Press the [MENU] Button. Select [INITIAL SETUP] and press the [1 SET] Button. Select [CLOCK SET] and press the [1 SET] Button.
AV20U.book 18 ページ 2003年2月12日 水曜日 午後6時16分 Setting the Power Supply Frequency Set the power supply frequency before using the SD Multi AV Device. The power supply frequency is different depending on the country or region. Adjustment of the frequency will help reduce the appearance of horizontal stripes consisting of light and dark patterns under fluorescent lighting. 1 2 3 4 1 2 PLAY OFF REC MENU 3 Set the Power/Mode Switch to [REC]. (l 13) Press the [MENU] Button.
AV20U.book 19 ページ 2003年2月12日 水曜日 Adjusting Brightness and Color Level on the LCD Monitor LCD Brightness [BRIGHTNESS] It adjusts the brightness of the image on the LCD screen. LCD Color Level [COLOR] It adjusts the color saturation of the image on the LCD screen. 午後6時16分 1 2 PLAY OFF REC MODE MENU 3 SETUP MENU QUALITY 1 2 3 4 5 6 Set the Power/Mode Switch to [REC] and set the operation mode to [PICTURE] or [MPEG4]. Press the [MENU] Button. Select [DISPLAY SETUP] and press the [1 SET] Button.
AV20U.book 20 ページ 2003年2月12日 水曜日 午後6時16分 Basic Functions 1 Recording Still Pictures 2 3 4 5 6 Set the Power/Mode Switch to [REC] and set the operation mode to [PICTURE]. Press the [MENU] Button. 2 Set [QUALITY] to desired picture quality. 3,4 ≥Select one of [FINE], [NORMAL], or [ECONOMY]. To use the flash, Set [FLASH] to [ON] or [AUTO]. ª To Check the Recorded Image immediately Press the [1 SET] Button 2. ≥The recorded image displays for 5 seconds. ≥The [REVIEW] Indication is displayed.
AV20U.book 21 ページ 2003年2月12日 水曜日 午後6時16分 Playing back Still Pictures Plays back still pictures recorded on the Memory Card. 1 2 3 Set the Power/Mode Switch to [PLAY] and set the operation mode to [PICTURE]. ≥Still picture files recorded on the Memory Card are displayed in the index picture screen. 1 OFF PLAY REC MODE 2 Press the UP/DOWN/LEFT/RIGHT side of the Multi-function Button to select a desired file. Press the [1 SET] Button. ≥A still picture file is played back.
AV20U.book 22 ページ 2003年2月12日 水曜日 午後6時16分 Recording Moving Pictures (MPEG4) You can record moving pictures on the Memory Card. 1 2 3 4 Set the Power/Mode Switch to [REC] and set the operation mode to [MPEG4]. Press the [MENU] Button. 1 PLAY OFF REC MODE Set the [MPEG4 MODE] to desired picture quality. ≥Select one of [SUPER FINE], [FINE], [NORMAL], or [ECONOMY]. ≥Press the [MENU] Button after completing the setting. Press the Recording Start/Stop Button. 2 MENU 3 ≥Recording starts.
AV20U.book 23 ページ 2003年2月12日 水曜日 午後6時16分 Playing Back Moving Pictures (MPEG4) Plays back moving pictures recorded on the Memory Card. 1 2 3 Set the Power/Mode Switch to [PLAY] and set the operation mode to [MPEG4]. ≥Still picture files recorded on the Memory Card are displayed in the index picture screen. 1 OFF PLAY REC MODE 2 Press the UP/DOWN/LEFT/RIGHT side of the Multi-function Button to select a desired file. Press the [1 SET] Button. ≥A moving picture file is played back.
AV20U.book 24 ページ 2003年2月12日 水曜日 午後6時16分 Recording Voice (Voice Recording Function) You can record voice data on the Memory Card. 1 2 3 Set the Power/Mode Switch to [REC] and set the operation mode to [VOICE]. Press the Recording Start/Stop Button. OFF PLAY REC MODE VOICE ≥Recording starts. Speak into the built-in microphone 1 of this SD Multi AV Device. ≥While recording voice, press the Recording Start/Stop Button to stop recording. ≥The LCD Monitor will shut off approx.
AV20U.book 25 ページ 2003年2月12日 水曜日 午後6時16分 Hearing the Voice Recorded (Voice Playback) Plays back the voice files recorded by the SD Multi AV Device. 1 2 3 Set the Power/Mode Switch to [PLAY] and set the operation mode to [VOICE]. ≥Voice files recorded on the Memory Card are displayed in the form of a list. Press the UP/DOWN side of the Multifunction Button to select a desired file. Press the [1 SET] Button.
AV20U.book 26 ページ 2003年2月12日 水曜日 午後6時16分 Listening to Music (Music Playback) You can play MPEG-2 AAC and MP3 data. Music files must be written on the SD Memory Card using the SD-Jukebox Ver.3.0 (supplied accessory) special software program in order for the SD Multi AV Device to play music. For the SD-Jukebox Ver.3.0, refer to Page 34 and the operating instructions for the SDJukebox Ver.3.0 in PDF format installed with the software.
AV20U.book 27 ページ 2003年2月12日 水曜日 ª Selecting a Playlist 午後6時16分 1 Playlists set using the SD-Jukebox Ver.3.0 can be played back. Select a desired playlist in [SELECT PLAYLIST] of the menu. 1 Adjusting the Volume Adjusts the playback audio level for moving picture files, music files, and voice files. 1 SELECT PLAYLIST DEFAULT PLAYLIST PLAYLIST -1 PLAYLIST -2 PLAYLIST -3 1 – VOL + Press [s] or [r] of the [VOL] Button. ≥The [VOLUME] indication appears.
AV20U.book 28 ページ 2003年2月12日 水曜日 午後6時16分 Advanced Functions Backlight Compensation Function This prevents a recording subject from being recorded too dark in backlight. (Backlight is the light that shines from behind a recording subject.) 1 2 1 OFF PLAY OFF PLAY REC MODE 2 Set the Power/Mode Switch to [REC] and set the operation mode to [PICTURE] or [MPEG4]. Press [ª] for approx. 1 second. ≥The [ª] Indication is displayed. ≥Press [ª] for approx. 1 second again to resume Normal Recording mode.
AV20U.book 29 ページ 2003年2月12日 水曜日 午後6時16分 Erasing the Files Recorded on a Memory Card Using SD Multi AV Device, you can erase files recorded on the Memory Card. After files are erased, it cannot be restored. 1 2 3 4 5 1 Play back the file to be erased or let it pause. (l 21, 23, 25) Press the [MENU] Button. ≥The editing menu screen appears. Press the UP/DOWN side of the Multifunction Button until [ERASE CARD FILE] is displayed. Press the LEFT/RIGHT side of the Multifunction Button to select [YES].
AV20U.book 30 ページ 2003年2月12日 水曜日 午後6時16分 Protecting files (File Protection) 1 Precious files recorded on the Memory Card can be locked to prevent accidental erasure. 1 2 3 4 5 Play back the file to be locked or let it pause. (l 21, 23, 25) Press the [MENU] Button. ≥The editing menu screen appears. Press the UP/DOWN side of the Multifunction Button until [FILE PROTECTION] is displayed. Press the LEFT/RIGHT side of the Multifunction Button to select [LOCK]. Press the [1 SET] Button.
AV20U.book 31 ページ 2003年2月12日 水曜日 午後6時16分 1 Writing Printing Data on a Memory Card (DPOF Setting) DPOF Setting Printing data (DPOF Setting), such as the number of images to be printed, can be written to the Memory Card. 1 2 3 4 Play back a still picture to be DPOF-set. (l 21) Press the [MENU] Button. ≥The editing menu screen appears. 2 MENU 3,4 Press the the UP/DOWN side of the Multifunction Button until [DPOF SETTING] is displayed.
AV20U.book 32 ページ 2003年2月12日 水曜日 午後6時16分 Playing back still pictures one by one (P.Slide Show) Plays back still pictures based on the Slide show data set by SD-MovieStage Ver.2.0 (supplied). 1 2 3 Set the Power/Mode Switch to [PLAY] and set the operation mode to [PICTURE]. Press the [MENU] Button. Select the [P.SLIDE SHOW] and press the [1 SET] Button. ≥P.Slide show starts. ≥Pictures set with SD-MovieStage are sequentially displayed, each for approx. 5 seconds, and the P.Slide show stops.
AV20U.book 33 ページ 2003年2月12日 水曜日 午後6時16分 Formatting the Memory Card If a Memory Card becomes unreadable by the SD Multi AV Device, formatting it may make it reusable. Formatting erases all the data recorded on the Memory Card. 1 2 3 4 5 Set the Power/Mode Switch to [REC]. Press the [MENU] Button. Select [INITIAL SETUP] and press the [1 SET] Button. Select [CARD FORMAT] and press the [1 SET] Button.. 1 2 PLAY OFF REC MENU 3 ≥A verification message appears . Select [YES] to be formatted.
AV20U.book 34 ページ 2003年2月12日 水曜日 午後6時16分 On a Personal Computer About the supplied software ª About the supplied software The SD Multi AV Device comes with SD-Jukebox Ver.3.0, SD-MovieStage Ver.2.0, and a USB driver to allow the SD Multi AV Device to be used on a personal computer. By using these software packages, you can record high-quality music which can be played back in the [MUSIC] mode of the SD Multi AV Device (SD-Jukebox Ver.3.
AV20U.book 35 ページ 2003年2月12日 水曜日 午後6時16分 ≥A USB hub or USB card used for connection does not guarantee a normal operation. Use the attached USB cable for direct connection to the personal computer. ≥Before installing (or uninstalling), quit all other applications. If the launcher for installation is not activated automatically when the CD-ROM is inserted in the personal computer’s CD-ROM drive, double-click the CD-ROM icon in [My Computer].
AV20U.book 36 ページ 2003年2月12日 水曜日 午後6時16分 SD-MovieStage ª Features of SD-MovieStage Ver.2.0 ≥MPEG4 moving pictures (ASF-format files) and still pictures (JPEG pictures) recorded on the SD Multi AV Device are displayed in thumbnail form and can be easily played back on a personal computer. ≥MPEG4 moving pictures (ASF-format files) can be cut-edited. ≥Pictures recorded on other DV devices can be converted into those for the SD Multi AV Device. ≥E-mails with moving pictures attached can be easily sent.
AV20U.book 37 ページ 2003年2月12日 水曜日 午後6時16分 SD-Jukebox ª Features of SD-Jukebox Ver.3.0 ≥Records high quality music onto an SD Memory Card that can be played back on the SD Multi AV Device. ≥Allows Playlists to be created containing your favorite tracks. (If a Playlist is selected, only the tracks in the Playlist are played back.) ≥Allows a still picture to be associated with the music data. ª System Requirements for SD-Jukebox Ver.3.
AV20U.book 38 ページ 2003年2月12日 水曜日 午後6時16分 Installing USB Driver 2 When the USB driver is installed, the SD Multi AV Device will be recognized by the personal computer. Do not connect the USB cable until the USB driver has been installed. ≥Please read [Read before you install] before installing the USB Driver. 1 2 3 Insert the supplied CD-ROM into the personal computer’s CD-ROM drive. 3 ≥The launcher for installation is activated automatically. Click [USB Driver]. Click [Finish].
AV20U.book 39 ページ 2003年2月12日 水曜日 Installing SD-Jukebox Ver.3.0 1 Insert the supplied CD-ROM into the 午後6時16分 2 personal computer’s CD-ROM drive. 2 3 4 5 ≥The launcher for the installation is activated automatically. Click [SD-Jukebox Ver.3.0]. ≥When [Welcome] screen appears, click [Next]. ≥If the confirmation whether you have the right to administrate the personal computer is displayed, click [OK] and continue with installation.
AV20U.book 40 ページ 2003年2月12日 水曜日 午後6時16分 Connecting with the PC ≥Connect the USB cable after the USB driver is installed. ≥Use both the AC adaptor and the battery. Either one alone does not allow the SD Multi AV Device to be used with a personal computer. 1 2 3 4 Slide down the USB Terminal Cover to open it. Set the Power/Mode Switch to [PLAY]. Connect with the AC Adaptor 1.
AV20U.book 41 ページ 2003年2月12日 水曜日 Disconnecting the USB Cable safely If you use Windows XP/2000, remove the USB Cable using the following method. If you use Windows Me/98SE, check that the Memory Card Access Lamp is out, then remove the USB Cable. (Keep the SD Multi AV Device turned on.) 1 2 3 Double click the 午後6時16分 1 2 in task tray. ≥Hardware disconnect dialog box appears. Select [USB Mass Storage Device] and click [Stop]. Click [OK]. ≥Click [OK], and you can safely disconnect the cable.
AV20U.book 42 ページ 2003年2月12日 水曜日 午後6時16分 Constructing a Folder when the Memory Card is used with a PC ≥When the Memory Card with data recorded by the SD Multi AV Device is inserted into a personal computer, folders will be displayed as in the figure. ≥Use the SD-MovieStage Ver.2.0 for operating files in the Memory Card. [DCIM]: [MISC]: [SD_VIDEO]: [SD_VOICE]: [SD_AUDIO]: 42 The images (IMGA0001.JPG etc.) in this folder are recorded in the JPEG format.
AV20U.book 43 ページ 2003年2月12日 水曜日 午後6時16分 Others Charge the built-in battery for maintaining the date information This built-in battery is used for the memory of date and time. If [PRESS MENU TO SET CLOCK] is displayed when the power is on, the built-in battery may be exhausted. Charge using the following procedure: 1 2 1 Take the battery out and plug in the AC adaptor. (l 10) Turn the power off and leave the SD Multi AV Device as it is for approx. 12 hours.
AV20U.
AV20U.book 45 ページ 2003年2月12日 9 Elapsed time indication 0h00m00s [REC] mode: Elapsed recording time [PLAY] mode: Elapsed playback time 10 Indication of recordable time and recordable number of images R 0: Number of remaining recordable still pictures (Lights in red when it reaches zero.) R 0h00m: Remaining recordable time for MPEG4 moving pictures or audio (VOICE) (Lights up in red when it reaches 0h00m.
AV20U.book 46 ページ 2003年2月12日 Notes & Precautions ª Cautions for Use When you use your SD Multi AV Device on a rainy or snowy day or on a beach, make sure that no water or moisture enters the SD Multi AV Device. ≥Water may cause the SD Multi AV Device or Memory Card to malfunction. (Irreparable damage may occur.) ≥If sea water splashes onto the SD Multi AV Device, wet a soft cloth with tap water, wring it well, and use it to wipe the camera body carefully.
AV20U.book 47 ページ 2003年2月12日 If the Battery is used in an extremely cold environment, the Battery may only operate for approx. 5 minutes. If the Battery becomes extremely hot, a protective function may operate, and the Battery may become unusable for a while. ª About the Lens ≥Do not touch the lens. Wipe the SD Multi AV Device with a soft dry cloth when the lens becomes unclean. ≥When the Lens is Fogged Up, turn off the SD Multi AV Device and leave the SD Multi AV Device in this condition for approx.
AV20U.book 48 ページ 2003年2月12日 Always Keep the Terminals of the Battery Clean ≥Prevent the terminals from getting clogged with dirt, dust, or other substances. ≥If you drop the Battery accidentally, check to see if the Battery body and terminals are damaged. ≥Attaching a deformed Battery to the SD Multi AV Device may damage the SD Multi AV Device. ª Notes on the SD Memory Card Write-Protect Switch ≥The SD Memory Card has a write-protect switch.
AV20U.book 49 ページ 2003年2月12日 ª State of Power Lamp while charging The Power Lamp flashes while charging. (Flashes approx. every 2 seconds when charging is normal.) When the Power Lamps flashes more quickly or slowly (or turns off), some abnormality may have occurred. The flashing speed suggests the following states. Flashing approx. every 0.5 seconds: ≥The SD Multi AV Device, battery or AC adaptor may be defective. Contact your nearest Panasonic dealer. Flashing approx.
AV20U.book 50 ページ 2003年2月12日 ≥Electrical noise, static electricity or failure of the SD Multi AV Device or the Memory Card may damage the Memory Card or erase the data stored on the Memory Card. It is recommended to save important data onto a personal computer. ≥Some cards may pop out when they are removed. ª Using the LCD Monitor (l 12) ≥Forcefully rotating the LCD Monitor beyond ranges described in these operating instructions will damage the SD Multi AV Device.
AV20U.book 51 ページ 2003年2月12日 ª Recording Still Pictures (l 20) ≥The image size is 640 t 480 (VGA). ≥If [NORMAL] or [ECONOMY] is selected for recording, mosaic-pattern noise may appear on a playback image depending on the image content. ≥The available range of the Flash is approximately 2.7-4 ft. (80 to 120 cm) in a dark place. ≥Record the subject approx.1.7 ft. (50 cm) away from it.
AV20U.book 52 ページ 2003年2月12日 ≥The MPEG4 moving pictures recorded in the [ECONOMY] mode may not be played, if it was a short recording (4 seconds or shorter). ≥The sounds recorded will be in monaural. ≥The recorded data can be played back on Windows Media Player. ≥If MPEG4 moving pictures recorded by the SD Multi AV Device are played back on a personal computer, etc., a black belt may appear at the top and bottom of the pictures.
AV20U.book 53 ページ 2003年2月12日 ª Listening to Music (Music Playback) (l 26) ≥Only the MPEG2-AAC and MP3 data recorded using SD-Jukebox Ver.3.0 (supplied accessory) are applicable to play on your SD Multi AV Device. ≥This SD Multi AV Device alone does not allow tracks to be recorded or deleted. ≥Refer to the PDF manual of the SDJukebox Ver.3.0 as for Recording Music file and Playlist. ≥If there is no Music file, [SELECT PLAYLIST] screen on the menu is not displayed.
AV20U.book 54 ページ 2003年2月12日 ª Erasing the Files Recorded on a Memory Card (l 29) ≥Erased files cannot be restored. ≥This SD Multi AV Device cannot erase any music files (MP3 and MPEG2-AAC). ≥The files recorded in the Voice Record mode are automatically locked. Release the lock to erase them. ≥Do not erase the Voice files recorded with this SD Multi AV Device using other devices. ≥A locked file cannot be erased. Release the lock to erase them.
AV20U.book 55 ページ 2003年2月12日 ª Formatting the Memory Card (l 33) ≥Normally, it is not necessary to format the Memory Card. ≥If the Memory Card performance becomes unstable (recording or playback fails, etc.), try to format it. ≥If a message to prompt you to check the Memory Card comes up, it will be necessary to format it in order to use it on the SD Multi AV Device. ≥By formatting, all data stored in the Memory Card (e.g., still pictures, MPEG4 moving pictures, voice data, music data) are erased.
AV20U.book 56 ページ 2003年2月12日 keeps lighting. In this case, log on with [Administrator (computer administrator)] (or any other user name having equivalent rights), right-click the Removable Disk icon in [My Computer], and select [Remove]. Check that the Card Access Lamp goes off, then remove the Memory Card. ≥When the USB Driver is installed and the SD Multi AV Device is connected to the personal computer for the first time, the [Found New Hardware Wizard] screen may appear.
AV20U.book 57 ページ 2003年2月12日 Before Requesting Service Power 1: The SD Multi AV Device power cannot be turned on. 1-1: Is the power source connected correctly? 1-2: Is the Battery fully charged? Charge it with the AC Adaptor. 2: The SD Multi AV Device power shuts off automatically. 2: If you do not use the SD Multi AV Device for more than 10 minutes, the power shuts off automatically to save the Battery power. 3: The SD Multi AV Device power does not stay on long enough.
AV20U.book 5: 58 ページ 2003年2月12日 During Playback an [k] Indication is displayed. 5: The data was either recorded in a different format, or data is damaged. 6: Even if a Memory Card is formatted, it cannot be used. 6: Either the SD Multi AV Device or the Memory Card may be damaged. Please consult your Panasonic dealer. 7: Playing back or recording do not function and the screen has frozen. 7: Set the Power/Mode Switch to [OFF] and then set it back to [REC] or [PLAY] after a while (approx.1 minute).
AV20U.book 59 ページ 2003年2月12日 水曜日 午後6時16分 Specifications SD Multi AV Device (Panasonic SV-AV20U) Power Source: Power Consumption: Image Sensor: Lens: Monitor: Microphone: Standard Illumination: Minimum Required Illumination: Recording Media: Image Compression: Video Compression: Voice Compression: Music Expansion: Dimensions: Weight: Operating Temperature: Operating Humidity: Information for your safety DC 4.8 V (AC Adaptor) DC 3.7 V (Battery) Recording (When recording the MPEG4 moving picture ) 2.
AV20U.book 60 ページ 2003年2月12日 水曜日 午後6時16分 Limited Warranty (For U.S.A. Only) Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.
AV20U.book 61 ページ 2003年2月12日 水曜日 午後6時16分 Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
AV20U.book 62 ページ 2003年2月12日 水曜日 午後6時16分 Customer Services Directory (For U.S.A. Only) For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquires please contact: 1-800-211-PANA(7262), Monday-Friday 9am-9pm Saturday-Sunday 9am-7pm, EST. or send e-mail: consumerproducts@panasonic.com Web Site: http://www.panasonic.com You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site.