Instruction Manual

14
RQT9939
14
Specifications
█ Amplifier section
RMS output power: Dolby Digital mode
Front Ch 30 W per channel (6 Ω), 1 kHz, 10% THD
Subwoofer Ch
60 W per channel (3 Ω), 100 Hz, 10% THD
Total RMS Dolby Digital mode power 120 W
█ Terminals section
HDAVI Control
This unit supports “HDAVI Control 5” function
HDMI AV input
Input connector Type A (19 pin)
HDMI AV output
Output connector Type A (19 pin)
Digital audio input
Optical digital input Optical terminal
Sampling frequency 32 kHz, 44.1 kHz, 48 kHz
88.2 kHz, 96 kHz (only LPCM)
Audio format
Dolby Digital, DTS Digital Surround, LPCM
Analog audio input
Audio input Pin jack (1 system)
USB port For service use only
█ Bluetooth
®
section
Version Bluetooth
®
Ver. 3.0
Class Class 2
Supported profiles A2DP
Operating frequency 2402 MHz to 2480 MHz
Operation distance 10 m line of sight
█ Speaker section
Front speaker (built-in)
Type 1 way, 1 speaker system (bass reflex)
Speaker unit(s)
Full range 3.8 cm x 9 cm cone type x 2
Subwoofer (built-in)
Type 1 way, 2 speaker system (bass reflex)
Speaker unit(s)
Woofer 8 cm cone type x 2
█ General
Power supply AC 220 V to 240 V, 50 Hz
Power consumption 27 W
Dimensions (W x H x D) 700 mm x 60 mm x 365 mm
Mass 4.5 kg
Maximum loading weight 50 kg
Operating temperature range 0°C to +40°C
Operating humidity range
20% to 80% RH (no condensation)
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
spectrum analyzer.
Power consumption in standby mode
(With “BLUETOOTH STANDBY” set to “OFF”)
0.25 W (approximate)
RQT9939-Z.book Page 14 Monday, February 10, 2014 6:17 PM
printing
Confidential
Until:
10 Mar 2014