Operating Instructions

18
RQT9785
≥For a safety measure to prevent the speakers from falling, refer to page 20.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following step 1 of “Place the speakers
vertically” (> 14).
Insert the speaker cable through the speaker base and connect the
speaker cables.
≥ Be sure to insert the speaker cable through the threading hole as indicated in the illustration. (If the speaker cable is
twisted, it might not fit through the opening. Straighten the speaker cable before inserting.)
≥ Insert the wire fully, taking care not to insert beyond the wire insulation.
Place the speakers using the speaker
bases
∏ 2 Speakers ∏ 2 Speaker cables
WHITE: Left
RED: Right
∏
2 Stand necks
∏ 2 Speaker bases ∏ 4 Screws
1 Insert the wire fully.
r: White
s: Blue line
2 Press into the groove.


Push
SC-HTB570_RQT9785-B_mst.book 18 ページ ２０１３年１月１０日 木曜日 午後２時５６分