Operating Instructions

VQT4J81
20
20
Selecting the recording scene
This unit offers recommended recording settings for each recording scene. Selecting
the recording scene enables easy recording with the most appropriate settings.
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU] for
approx. 1 second
or more.
The screen to select
the recording scene is
displayed.
2
Press +, – to select the scene and
press [q OK] to enter.
If you select “USER”, skip the step
3
.
3
Press +, – to select “LOAD” and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The selected recording
scene is displayed.
When [REC *] is pressed, recording is
performed with the selected recording scene
setting.
* If you select “USER” in step
2
, the state immediately before the recording scene was set is
restored, and the recording scene indication disappears.
* If you individually change settings such as the recording mode when the recording scene is set,
the settings o
verwrite the “USER” settings, and the recording scene indication disappears.
* The recording scene operates when microphone recording is used. Recording scene does not
oper
ate when another device is connected and the Mic/Line switch is set to [LINE] (➜ page 35).
* You can also set the recording scene by pressing [MENU] and selecting “SCENE SELECT” from
“MIC REC MENU”.
F2
REC *
STOP g/RETURN
MENU
VQT4J81_RR-XS450_420-E_En.indd 20 2012/05/29 9:35:43
20
20
VQT4J69
Odabir scene snimanja
Na ovom su uređaju ponuđene preporučene postavke snimanja za svaku scenu snimanja.
Odabirom scene snimanja omogućuje se jednostavno snimanje s odgovarajućim postavkama.
● Ako u koraku odaberete "USER", uređaj se vraća u stanje neposredno prije postavljanja
scene snimanja, a sa zaslona nestaje pokazatelj scene snimanja.
● Ako nakon postavljanja scene snimanja promijenite postavke poput načina snimanja, odabrane
postavke pisat će preko unosa postavki “USER”, a pokazatelj scene snimanja nestat će sa zaslona.
● Scena snimanja uključena je dok se koristi mikrofon. Scena snimanja nije uključena kada je
spojen drugi uređaj te kada je prekidač Mic/Line postavljen na [LINE] (vanjski izvor) (→ str. 35).
● Scenu snimanja možete postaviti i tako da pritisnete [MENU] i odaberete “SCENE SELECT” u
izborniku “MIC REC MENU”.
• Pritisnite [STOP ■/RETURN] da biste
zaustavili uređaj
Držite [MENU]
približno 1
sekundu ili duže.
Prikazuje se zaslon za
odabir scene snimanja.
Pritisnite +, - da biste odabrali
scenu i zatim pritisnite [► OK] za
unos.
Ako ste odabrali "USER" (Korisnik),
preskočite korak .
Pritisnite +, - da biste odabrali
"LOAD" (Učitaj) i zatim pritisnite
[► OK] za unos.
Za izlaz iz zaslona za postavljanje
pritisnite [F2 (CLOSE)].
Prikazuje se odabrana scena
snimanja.
Kada pritisnete [REC ●], snimanje se izvršava
s odabranom postavkom scene snimanja.
STOP ■/RETURN
MENU
REC ●
VQT4J81
20
20
Selecting the recording scene
This unit offers recommended recording settings for each recording scene. Selecting
the recording scene enables easy recording with the most appropriate settings.
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU] for
approx. 1 second
or more.
The screen to select
the recording scene is
displayed.
2
Press +, – to select the scene and
press [q OK] to enter.
If you select “USER”, skip the step
3
.
3
Press +, – to select “LOAD” and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The selected recording
scene is displayed.
When [REC *] is pressed, recording is
performed with the selected recording scene
setting.
* If you select “USER” in step
2
, the state immediately before the recording scene was set is
restored, and the recording scene indication disappears.
* If you individually change settings such as the recording mode when the recording scene is set,
the settings o
verwrite the “USER” settings, and the recording scene indication disappears.
* The recording scene operates when microphone recording is used. Recording scene does not
oper
ate when another device is connected and the Mic/Line switch is set to [LINE] (➜ page 35).
* You can also set the recording scene by pressing [MENU] and selecting “SCENE SELECT” from
“MIC REC MENU”.
F2
REC *
STOP g/RETURN
MENU
VQT4J81_RR-XS450_420-E_En.indd 20 2012/05/29 9:35:43
VQT4J81
20
20
Selecting the recording scene
This unit offers recommended recording settings for each recording scene. Selecting
the recording scene enables easy recording with the most appropriate settings.
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU] for
approx. 1 second
or more.
The screen to select
the recording scene is
displayed.
2
Press +, – to select the scene and
press [q OK] to enter.
If you select “USER”, skip the step
3
.
3
Press +, – to select “LOAD” and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The selected recording
scene is displayed.
When [REC *] is pressed, recording is
performed with the selected recording scene
setting.
* If you select “USER” in step
2
, the state immediately before the recording scene was set is
restored, and the recording scene indication disappears.
* If you individually change settings such as the recording mode when the recording scene is set,
the settings o
verwrite the “USER” settings, and the recording scene indication disappears.
* The recording scene operates when microphone recording is used. Recording scene does not
oper
ate when another device is connected and the Mic/Line switch is set to [LINE] (➜ page 35).
* You can also set the recording scene by pressing [MENU] and selecting “SCENE SELECT” from
“MIC REC MENU”.
F2
REC *
STOP g/RETURN
MENU
VQT4J81_RR-XS450_420-E_En.indd 20 2012/05/29 9:35:43
VQT4J81
20
20
Selecting the recording scene
This unit offers recommended recording settings for each recording scene. Selecting
the recording scene enables easy recording with the most appropriate settings.
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU] for
approx. 1 second
or more.
The screen to select
the recording scene is
displayed.
2
Press +, – to select the scene and
press [q OK] to enter.
If you select “USER”, skip the step
3
.
3
Press +, – to select “LOAD” and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The selected recording
scene is displayed.
When [REC *] is pressed, recording is
performed with the selected recording scene
setting.
* If you select “USER” in step
2
, the state immediately before the recording scene was set is
restored, and the recording scene indication disappears.
* If you individually change settings such as the recording mode when the recording scene is set,
the settings o
verwrite the “USER” settings, and the recording scene indication disappears.
* The recording scene operates when microphone recording is used. Recording scene does not
oper
ate when another device is connected and the Mic/Line switch is set to [LINE] (➜ page 35).
* You can also set the recording scene by pressing [MENU] and selecting “SCENE SELECT” from
“MIC REC MENU”.
F2
REC *
STOP g/RETURN
MENU
VQT4J81_RR-XS450_420-E_En.indd 20 2012/05/29 9:35:43
VQT4J81
20
20
Selecting the recording scene
This unit offers recommended recording settings for each recording scene. Selecting
the recording scene enables easy recording with the most appropriate settings.
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU] for
approx. 1 second
or more.
The screen to select
the recording scene is
displayed.
2
Press +, – to select the scene and
press [q OK] to enter.
If you select “USER”, skip the step
3
.
3
Press +, – to select “LOAD” and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The selected recording
scene is displayed.
When [REC *] is pressed, recording is
performed with the selected recording scene
setting.
* If you select “USER” in step
2
, the state immediately before the recording scene was set is
restored, and the recording scene indication disappears.
* If you individually change settings such as the recording mode when the recording scene is set,
the settings o
verwrite the “USER” settings, and the recording scene indication disappears.
* The recording scene operates when microphone recording is used. Recording scene does not
oper
ate when another device is connected and the Mic/Line switch is set to [LINE] (➜ page 35).
* You can also set the recording scene by pressing [MENU] and selecting “SCENE SELECT” from
“MIC REC MENU”.
F2
REC *
STOP g/RETURN
MENU
VQT4J81_RR-XS450_420-E_En.indd 20 2012/05/29 9:35:43