Panasonic ° Digital Camera Operating Model No. Instructions PV-SD4090 OPalmCamo For assistance, call 1-800-272-7033. Before attempting to connect, operate or adjust this product, thoroughly, and keep them for future reference.
I ! Attach your purchase receipt here Thank you and congratulations f Date of Purchase On your purchase of this state of the art Panasonic Digital Camera. This product has been manufactured and tested to Panasonic's highest standards to give you the best in performance and reliability. Save this operating instruction manual as an operating and information guide. Dealer Purchased Dealer From Address Dealer Phone No. Model No. Serial No. k.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Note: This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when operated in a residential environment.
1. Read Instructions-Atl the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions--Thesafetyand operating instructions should be retained for future reference. 3. Heed Warnings -- All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and maintenance instructions should be followed. 5. Cleaning-Unplug this video unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
17. Damage Requiring Service -- Unplug this video unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have fallen into the video unit. c. If the video unit has been exposed to rain or water. d. If the video unit does not operate normally by following the operating instructions.
Getting Started Things You Should Know ................................................................................................... Safety Precautions ............................................................................................................. Important Safeguards ......................................................................................................... Precautions .........................................................................................................
D O 1.3 Mega Pixel CCD Removable 120MB SuperDisk TM Diskette (stores up to 1,500 shots on one diskette) Floppy Disk Compatible Our PV-SD4090 enables you to capture and save a large amount of image data using the memory storage of the SuperDisk Drive. Image data can be easily transferred to your Personal Computer usinq the USB interface. Easy Connection to a PC using a USB interface Use as an External Storage Device for a PC 2.5 in.
MIC See page 25. Self-Timer Indicator See page 37. Light Sensor See page 34. TO PCTerminal See pages 48, 49, 56,57. A/VOUTJack See page 33. FLASH Emitter See page 34. DC IN Jack See page 15. LENS COVER (OPEN/CLOSE) See pages 21-23, 25. Lens (T/W) See pages 22, 23, 25. LCDViewfinder EJECT See pages 22-2 28, 29. See page 17. REC MODE See pages 17, 49, 57. See pages 22, 23,25,26. Button POWER LED See page 19. VOL+ See pages_ 29,30. ACCESS LED See page 18. See pages 19,20.
SHTR / (SHUTTER) See pages 22, 25, 30, 31, 40, 41, 66 POWER Switch \' "_----_' (PC'PLAY_)FFoRECoMANUAL See pages 19, 20 _, .... ; ;: REC) n ..... U i__ ...... ...... (BjE'C_P_ /l_r=_( Y / )_'PC / Battery Compartment See page 14. / __ I - ,:6, Tripod Receptacle Used when securing the camera to a tripod.
The indication displayed Digital Camera. on the LCD screen will tell you the operation White Balance Mode (See page 35.) AUTO No Indication INDOOR -_- _ Light Metering Mode (See page 36.) AUTO: No Indication J SPOT: [] status of the Self-Timer Mode (See page 37.) WHITE SET: Displayed when image with AUDIO is recorded. Flash Mode (See page 34.) AUTO • No Indication/ ON RED EYE: ® OFF : _ SLOW (See pages 22, 23.
< REC Mode> 1. AUDIO (See Pages 23, 25, 29, 30.) To select audio recording on/off. 3_ 4j 5j 2. SELF TIMER (See Page 37.) To set Self Timer. • LOW • 5. CLOCK SET (See Page 21 .) To set clock. 6. BEEP (See Page 27.) To select beep mode when capturing images.
. / DISPLAY MODE (See Pages 29, 30, 32.) Select playback mode. / 2_ '_ • NORMAL• / / 3-4_ 6/ : ,OMARKON SEL EXIT :AV : MENU SET / 2. DELETE (See Pages 40, 41 .) Delete image from SuperDisk Diskette or Floppy Disk. . :•• COPY (See Pages 42, 43.) To set copy. 4. AUDIO (See Pages 29, 30.) To select audio on/off when playing back. ON 5. PRINT MARK (See Page 66.) To set print mark. LOW 6. SLIDE SHOW (See Page 44.) Playback images as slide show. $.
Connect AC Cable (supplied) to AC IN on the AC Adaptor and plug the AC Adaptor into an AC outlet. • POWER LED lamp will light. • Disconnect DC Cable if it is connected to AC Adaptor. 2 POWER Lamp Charge Lamp 3 Attach the battery as shown to charge. • Charge Lamps on the AC Adaptor will flash and then turn solid green to indicate current charge level. When all 4 lamps are constantly on, the battery is fully charged. (approx. 1 hour 20 minutes.) Remove the Battery.
Bottom 1 View i© ------ 2 Slide the Battery Compartment lid in the direction of the arrow and swing it open. While sliding Latch, insert the Lithium Ion Battery until it locks into place. • Be sure to use a Lithium Ion Battery. Be sure that the direction of the arrow on the battery is facing down when inserting it into the camera. 3 WARNING! • Charge only with specified charger. • The Battery can be charged within a temperature range of 32 ° F(0 ° C) and 104 ° F (40 ° C).
Jack Cover 4 \ AC Adapter (supplied) 3 AC Cable (supplied) 2 DC POWER Cable (supplied) 1 2 Pull up the Jack Cover. Connect DC POWER Cable (supplied) IN on the Digital Camera. 3 Connect 4 Plug the AC Adaptor AC Cable (supplied) to DC OUT on the AC Adaptor and DC to AC IN on the AC Adaptor. into an AC outlet. In,_q • • • • While not in use, unplug the AC Adaptor from the AC outlet. Use the supplied Panasonic AC Adaptor. Do not connect AC Adaptor after turning POWER on.
Thread the strap ends through the -7f Strap Attachment Rings. Reinsert the strap ends through their buckles. • Make sure the straps are not twisted. ® Loosen the strap from the Buckle and create a loop. Pull the strap firmly through the Buckle to shorten or lengthen the strap.
1 2 Inserting the Disk Media: • The captured images will be stored on the Disk Media. • Be sure to insert the Disk Media before using the camera. Open the cover. Insert the Disk Media. Push the Disk Media fully into the SuperDisk Drive. EJECT button Removing the Disk Media: Set the POWER Switch to REC, PLAY or PC. Push the EJECT button so the Disk Media pops out. (Be careful not to drop the Disk Media.
• Do not bend, drop, apply high pressure or subject the Disk Media to strong shocks. • Do not store it in places with high temperature, high humidity, a lot of dust, or static electricity and strong electromagnetic waves. • Keep the Disk Media's contacts free from dust, water or other foreign substances. Do not touch them with your fingers, etc. • Do not disassemble or deform the Disk Media. • Be sure to make a backup copy of important data.
Ai Please refer to pages 11~12 for explanation of each menu item. -- Example rrm MENU •1/2> ON OFF I ,_IJIFKJ]
2 Press MENU to display MENU screen. • ON• 8RIGHTNESN OSD ON IRIN SELFTIMER SEL :AV ,,OFF , PLAY 3 EXIT Press • or • SET OFF :41. : MENU to select the item. AUDIO ON SELFTIMER OFF BRIGHTNESS 40N IRIS
--Before you begin Open the Lens Cover. Set the POWER Switch to REC, MANUAL REC or PLAY. (See pages 19-20.) Press MENU to display the MENU screen. Press • or • to select CLOCK the MENU screen.
1 _-Before you begin Open the Lens Cover. Set the POWER Switch to REC or MANUAL REC. (See pages 19-20.) Press REC MODE repeatedly to select recording mode (SF, F, N, ZOOM). (See page 26.) • If you want to use SLOW SHU]q-ER: In Manual mode, press MENU to display the MENU screen, and then press • or T to select SLOW SHUTTER. Press4 or I_ to select ON. (See page 11.) BALANCE TIME LAPSE CLOCK SET \ 22 REC WHI
You can record audio with a still image. Press REC MODE The still image and audio can then be played back in the PLAY mode. (See page 20.) Please follow the instructions below. recording mode (SF, F, N, ZOOM). (See page 26.) ,---Before you begin Open the Lens Cover. Set the POWER Switch to REC or MANUAL REC. (See pages 19-20.) 2 repeatedly to select Press MENU to select AUDIO and then press • or • to select AUDIO ON.
Press SHTR down halfway to lock Auto Focus. • Beep sounds twice. (see page 27.) Press SHTR down the rest of the way to actually capture the image. • Shutter sounds once. (See page 27.) • You can record the audio for 5 seconds by pressing the SHTR button. REC 10 F SEP 10 2000 10:00AM • While the Digital Camera processes the image, REC OSD will appear on the LCD. The captured image will be displayed on the LCD Viewfinder for a few seconds.
1 You can capture a motion image by selecting [] in REC MODE. And you can capture a burst image by selecting _ in REC MODE. --Before 2 you begin Open the Lens Cover. Set the POWER to REC or MANUAL REC. (See pages 19-20.) ,4 MIC 3 4 Press REC MODE repeatedly to select Motion (1_) or Burst (___1)recording mode. Press ZOOM T or W to zoom In and Out. • Zoom magnification level is up to x3. • There is no zoom indication on the LCD Viewfinder. Press SHTR down halfway to lock Auto Focus.
Image Resolution Recording SF F N ZOOM: Mode : Super Fine Mode (with audio) Select this mode when you want the highest quality resolution with the lowest compression (i.e. for printing). : Fine Mode (with audio) Select this mode when you want a high resolution (i.e. for printing or for archiving an image). : Normal Mode (with audio) Select this mode when you want a lower resolution image (i.e. for e-mailing or posting on the Internet).
1 Set Digital Camera to beep (low or high volume), when an image is captured, or set to OFF. _Before Press • or • to select BEEP and Press • or • to select one of the three settings shown below. you begin Set the POWER Switch to REC, MANUAL | REC or PLAY. (See pages 19-20,) Press MENU to display the MENU screen.
1 You may want to brighten or darken the LCD (Liquid Crystal Display) Viewfinder for easier viewing. This adjustment will not affect the captured image brightness. ,--Before Press • or • to select BRIGHTNESS in the MENU screen. you begin
1 You can playback LCD Viewfinder. _Before recorded images on the Press MENU to display PLAY MENU and press • to set DISPLAY MODE to NORMAL. you begin I Set the POWER Switch to PLAY. (See pages 19~20.) | COPY AUDIO PRINT MARK J ON SEL DELETE : AV EXIT : MENU 2 Press • or • SET : • • to select AUDIO, and press • or • to select AUDIO ON or OFF. Press MENU to exit. DISPLAY MODE NORMAL DELETE F:_.
The following When a captured image in [] (Motion Image Rec) mode is displayed. (See page 25.) message will appear. • Adjust the volume by pressing [100-0002 I --Before SEP. 10 2000 IO:OOAMJ _ Press SHTR to start playback Motion If you select _;_ in the PLAY MENU, you will be able to see Thumbnail images on the LCD Viewfinder (each Thumbnail page will contain 9 images). VOL +/-. 1 of image. Press • or • to select DISPLAY MODE in the MENU screen. And, press • or • to select _.
4 Press • (-) to move back through the images on the page until the number of the image you want to select is highlighted. '_2it0003, 0004 tl'+s"It'_,tl_ tt0004 II SEL ; • • • SET:SHTR Press • or • L SEL : • • At SIET:SHTR J to go directly to the next or previous page of images. 100 02 II 0003 It 0004 I Pres'_lk ,5 6 SEL : • • • SET;SHTR 100 0002 0003 0008 0009 SEL :• • •V 0004 0010 SET:SHTR 0002 0003 0004 0002 0003 0004 0005 0006 0007 0005 0006 0007 00.
Set the POWER Switch to PLAY. (See _Before you begin pages 19~20.) 11 Press MENU to display PLAY MENU and press ZOOM. • to set display I mode to COPY AUDIO PRINT ON MARK SEL DELETE : AV EXIT : MENU SET : < • Press MENU to zoom(x2) in on the center portion of the image. Press •,,, •, or • change the zooming repeatedly to area. Press SHTR to restore the image to its normal 1,2 4 32 size.
3 A/V OUT 1 2 3 Connect the Digital Camera to your TV or VCR using the A/V Cable (supplied) as shown. Turn on your TV and select its video input mode. Then, select its line input mode, (Refer to your TV manual.) Set the Digital Camera POWER to PLAY. You may select playback as described on page 29 to page 32, • The POWER A/V Cable (supplied) 4 LED lamp lights up. Start a recording of the desired images. (Refer to your VCR manual.
This camera features a Built-in Flash which can be used to capture conditions. --Before images in dimly lit 1 you begin Set the POWER Switch MANUAL (See REC. to REC or pages 19-20.) Press _ repeatedly to select flash mode. The mode that is selected will be displayed on the LCD Viewfinder. AUTO (No indication) : The flash automatically lights depending on lighting conditions. : The flash will light whenever capture an image.
Auto White Balance automatically maintains optimum color balance lighting conditions. _Before in most 1 Press • or • to select WHITE BALANCE and press • or • to select one of the four settings shown below. • Default setting is AUTO. you begin Set the POWER Switch to MANUAL REC. (See pages 19-20.
According to the recording purpose, set light metering exposure time. --Before condition and to measure 1 or • to select LIGHT METER and press • or • to select one of the two settings shown below. • Default setting is AUTO. you begin Set the POWER Press • Switch to MANUAL WHITE REC. (See pages 19-20.
The Self-Timer allows you to capture an image about 10 seconds after pressing the shutter. 1 Press • or • to select SELF TIMER and press 4 or • to select ON. This puts the camera in self-timer mode. t the POWER Switch to REC or Before you begin NUAL REC. (See pages 19-20.
Normally, the camera adjusts the exposure automatically. However, when the background is extremely bright, or when the subject is backlit, you can compensate by adjusting the Iris manually. --Before 1 Press • or • to select IRIS. AUDIO ON SELF "RMER BRIGHTNESS OFF o. • you begin EXIT SEL Set the POWER pages 19-20.) to MANUAL REC. (See | J :;AV MENU SET :41" FJ) Press • to display IRIS screen.
Time Lapse enables you to set the camera to automatically capture an image from once every minute to once every 24 hours. _Before 1 or • to select TIME LAPSE and press • to select time interval. You can select a capture rate of approx. 1MIN, 5MIN, 10MIN, 30MIN, 1HOUR, 6HOUR, 12HOUR, or 24HOUR. you begin Set the POWER Switch to MANUAL REC. (See pages Press • 19~20.
You can delete unwanted images and increase the remaining image memory. Press • Warning: press • Once deleted, restored. images cannot be or • to select DELETE to display DELETE and menu. --Before you begin I Set the POWER Switch to PLAY. (See pages 19-20.) _SpLAyMODE NORMAL rmJw=.wa • ] FORMAT icon. j / AUtO PRII_MARK J SEL EX_ 2 :AT :MENU Press • menu.
You can easily format your Disk Media using this operation. Formatting of the Disk Media is done in the quick format. Warning: Formatting permanently removes all image data as well as any other files on the Disk. 1 PressA or • to select FORMAT press b" to display FORMAT EXIT L SEL Set the POWER Switch to PLAY. (See pages 19-205 _Before you begin 12 Press • and menu. :: MENU &v SET : .I • or • to select YES.
You can copy specific Disk Media to another this operation. images from one Disk Media using 1 PressA or • to select COPY. MODE PRINT MARK SEL :AV AUDIO EXIT : MENU NORMAL SET :41. ON Press • to display COPY menu and select COPY PAGE. _° • COPY ALL I 3 Press • menu.
You can copy all of the images stored on a Disk Media to another Disk Media using this operation. 1 Press • or • to select COPY. / NORMAL DELETE Set the POWER Switch to PLAY. (See pages 19~20.) AUDIO PRINT E)_IT SEL 2 Press select 3 • to display COPY ALL. COPY SEL EXIT ON :MARK MENU :AV • SET menu : AV : M_NU SET :
You can playback captured images as a slide show. --Before you begin Set the POWER Switch to PLAY. (See pages 19-20.) 1 Press • J 2 or • to select SLIDE SHOW. I os; l SET :< • to start slide show. SLIDE SHOW START PUSH MENU TO EXIT • Press MENU to exit this mode. SLIDE SHOW STOP - SifT'4" • SLIDE SHOW automatically approx. 20minutes.
System Requirements: • IBM PC/AT or compatible • Windows 98 (Pre-installed PC with USB port) • 486 CPU or higher (Pentium recommended) • 32MB on-board memory • 10MB available hard disk space • 256 Color Monitor or Full Color Monitor recommended (24bits per pixel or 16.7 million colors) • CD-ROM drive (for installation) • USB Port • Mouse or other pointing device USB Driver Installation Turn on the PC (Personal Computer) Insert supplied CD-ROM Click the "Start" Software into the CD-ROM 98. Drive.
PalmCam File Converter Installation • When transferring non-Design rule for Camera File system format images from your PC to the Digital Camera, you will need to convert the images data to Design rule for Camera File system format so that the Camera can read it.
QuickTime Driver Installation TM • The QuickTime TM Driver, when installed, Image Recording files to your PC. allows your Digital Camera to transfer Motion m • For information on Apple QuickTime, visit their website at :http://www.info.apple.com/info.apple.com/support/ Turn on the PC (Personal Insert supplied Software Click the "Start" Computer) CD-ROM and start into the CD-ROM Denotes 98. drive. button and then click "Run". Type in "D:\QTW_QuickTimelnstaller.
By using the included USB cable to connect to a PC, you can use your SuperDisk camera as an external storage device. 2 TO PC Terminal POWER Switch Personal Computer I 1 USB Cable (supplied) USB Terminal Turn on your PC. Set the POWER Switch to PC on the Digital Camera. • The POWER LED lamp lights up. • LCD Viewfinder is off in PC mode. Connect the Digital Camera to your PC (Windows) • You can use this Digital Camera • For extended periods power source.
Personal Computer / To read or write to the Disk Media using Windows 98 follow the instructions below. USB Cable (supplied) --Before ! you begin Set the POWER Switch to PC. Connect the Digital Camera to the PC using the supplied USB Cable, refer to page 48 for additional details. To PC Terminal Reading the Disk Media 1 2 Insert the Disk Media into the Digital Camera slot. Click "Start", "Programs" and "Image Viewing Software (for Example : PHOTODELUXE)".
Click on the "File" Menu and "Open File". The File Open MENU is displayed. Select the 3.5" FD Drive for the Digital Camera and find the image data file in the Digital Camera. • When the Digital Camera POWER Switch is set to PC, the Digital Camera Drive is recognized as the 3.5" FD Drive with the latest drive letter, for example (G:). • The Camera Disk consists of Dcim and Misc Folders. • The Dcim Folder is used to store image data, and the Misc Folder is used to store Print Mark data.
Writing to the Disk Media 1 2 3 Insert the Disk Media into the Digital Camera slot. Click "Start", "Programs", and "Windows Explorer"• You can write to the Disk Media by simply dragging and dropping a file or folder from the Digital Camera Drive to another Drive.
When the Digital Camera can not playback the image data which is transferred from another Drive to the Drive of the Digital Camera, even if the data is JPEG, PalmCam File Conversion is necessary. Before you begin the supplied referto to for Connect the USB DigitalCable, Camera thepage PC 48 using additional details. t the POWER Switch to PC. 1 2 3 Insert the Disk Media into the Digital Camera. Click the "Start", Converter". "Programs", "Palmcam (See page 17.
To delete a file (folder) from the Digital Camera. • Click on the file or folder you want to delete. Then from the "Delete" to delete the file. "File" menu click on m _,d r_e,_ [{_ . _ CO_ Parle Undo De_e Ptopefl_t V_; LP_/a t R_ UP / Plr_% to_ pi1_7 _ m '1 lnl p_-e • _IFI 1 2 3 End all applications and close all windows. (i.e. QuickTime, PhotoDeluxe, etc.) Eject the Disk Media from the Digital Camera. (See page 17.
• 256 Color Monitor or Full Color Monitor recommended (24bits per pixel or 16.7 million colors) • CD-ROM drive (for installation) • USB Port System Requirements: • Mac OS 8.1,8.5, 8.5.1, 8.6 • iMac or Power Macintosh G3 with USB Port • 32MB of RAM • Mouse or other pointing • 10MB available hard disk space device USB Driver Installation Turn on the Macintosh. Insert the supplied CD-ROM Drive. Software CD-ROM into the Double click the "PHOTODELUXE".
QuickTime TM Driver Installation • The QuickTime TM Driver, when installed, Image Recording files to your PC. • For information allows your Digital Camera to transfer Motion on Apple QuickTime, visit their website at :http://www.info.apple.com/info.apple.com/support/ Turn on the Macintosh. Insert the supplied CD-ROM Drive. Software CD-ROM into the Double click the "PHOTODELUXE". Double click on "QT 4.02" and "QuickTime E] QT 402 [] E] Installer".
By using the included USB cable to connect to a PC, you can use your SuperDisk camera as an external storage device. TO PC Terminal \ POWER Switch iMac ® USB Terminal USB Cable (supplied) 1 Turn on your PC. Set POWER Switch to PC on the Digital Camera. • The POWER LED lamp lights up. • LCD Viewfinder is off in PC mode. Connect the Digital Camera to your PC using the USB Cable (supplied). • You can use this Digital Camera • For extended periods power source.
iMac' To read or write to the Disk Media using Macintosh follow the instructions below. --Before USB Cable (supplied) you begin Set the POWER Switch to PC. Connect the Digital Camera to the PC using the supplied USB Cable, refer to page 56 for additional details. Reading the Disk Media ToPCTerminal Insert the Disk Media into the Digital Camera slot. 2 Click "Apple Menu", "Macintosh "Adobe PhotoDeluxe T"''. • When playing back Motion images, HD", "Adobe PhotoDeluxe TM 2.
Click on the "File" Menu and "Open File". The File Open MENU is displayed. Select the 3.5" FD Drive for the Digital Camera and find the image data file in the Digital Camera, • When the Digital Camera POWER Switch is set to PC, the Digital Camera recognized as the 3.5" FD Drive. • The Camera Disk consists of DCIM and MISC Folders. Drive is • The DCIM Folder is used to store image data, and the MISC Folder is used to store Print Mark data.
Writing to the Disk Media Insert the Disk Media into the Digital Camera slot. Click the icon displayed 3 on the desktop. You can write to the Disk Media by simply dragging and dropping a file or folder from Digital Camera Drive to another Drive. To delete a file (folder) from the Digital Camera. • Drag and Drop the selected file or folder into the "Trash" icon.
End all applications and close all windows. (i.e. QuickTime, Eject the Disk Media from the Digital Camera. 3 PhotoDeluxe, etc.) (See page 17.
You can use this Digital Camera as an external SuperDisk storage drive. You can only use SuperDisk Diskette media or 2HD Floppy Disks in this camera. • When a DOS formatted Floppy Disk is read by a Macintosh, function will be necessary. Type Format Style the PC/File Explanation Exchange Note SuperDisk DOS Format This format is usable with DOS This format is usable with Diskette (120MB) and Windows. Windowsand DOS Format This format is usable with DOS This format is usable with (1.
Before formatting the Disk Media, close all applications and all windows. If you format the Disk Media while any of the disk's files are open, an error may occur on the display. I 2 Insert the Disk Media into the Digital Camera Click "My Computer". Click right mouse button on the Digital Camera icon. ...........il dgl'l I 3 Click I " "FormatUtility for SuperDisk". Follow the instructions 62 slot. as they appear on your PC screen.
ill • The DISKCOPY command at the DOS prompt cannot SuperDisk Diskette/ Floppy Disk (2HD) be used. Floppy Disk (2HD) SuperDiskDrive I • Disk copy cannot Floppy Disk Drive ] be performed with SuperDisk SuperDisk Diskette Diskette. SuperDisk Diskette SuperDisk Drive • Explorer CopyDisk SuperDisk Drive is only possible with 2HD Floppy Disk.
• Do not format the Disk Media under DOS format Insert the SuperDisk Diskette Click the SuperDisk displayed View _ Disk" in the "Special" Disk icon MENU. Help Restart Shut Down 4 or Floppy Disk into the Digital Camera slot. on the desktop. Select "Erase t Diskette or Floppy with Macintosh. I Select format style. Then, click "Erase". Completely ¢USB(vl.
• FORMAT command cannot be used. The FORMAT • DISKCOPY The DISKCOPY • You cannot command at the DOS prompt cannot command command cannot be used for the Digital Camera. be used. at the DOS prompt cannot be used for the Digital Camera. boot your PC from this Digital Camera. • When using the Digital Camera, never remove the Disk Media while data is being written to it. If the Disk Media is removed unusable.
Use this feature when a laboratory service that supports DPOF (Digital Print Order Format) is used. _Before you begin Stamp Print Marker 1 -_ Set the POWER Switch to PLAY. (See pages 19~20.) J Press • or • and press • menu. to select PRINT MARK to display PRINT MARK ALL : AV : MENU SET : • • • Select "SET/CANCEL PAGE" to select image, "CANCEL ALL" to cancel all image print marks, and "INDEX" to set or clear index print on all pages.
For ordering Accessory CGR-B/ 202A1B instructions, # see the Accessory Order Form page. Description Figure Lithum Ion Battery rice ! $100.
Please photocopy this form when placing an order. 1. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping 5.00 & Handling Total Enclosed 3. Method of payment (check one) [] Check of Money Order enclosed (NO C.O.D.SHIPMENTS) [] VISA Credit Card # [] MasterCard Expiration Date [] Discover Customer Signature Make Check or Money Order to: MATSUSHITA (Please ACCESSORIES do not send cash) 4.
If you have a problem with your Digital Camera, it may be something yourself. Check the list below for symptoms and corrections. Symptom Cannot Pack. you can correct Solution charge the Battery • Make sure the rechargeable Lithium Pack is attached. (p 13) • Make sure all necessary connections and tight. (p 13) Ion Battery are correct No power. • Lithium Ion Battery is depleted. (p 14) • Make sure polarities are aligned properly.
These displays will alert you of a missed Indication SYSTEM ERROR operation or provide Phenomenon Failed USB handshake. further instructions. Solution If, after Power Switch is set to OFF, then REC or PLAY again, SYSTEM ERROR is still displayed, the camera may be broken and needs repair. DRIVE ERROR Failed to initialize the drive. If, after Power Switch is set to OFF, then REC or PLAY again, DRIVE ERROR is still displayed, the camera may be broken and needs repair.
Indication Phenomenon Solution THIS DISK IS PROTECTED The disk is protected. If THIS DISK IS PROTECTED displayed, change disks or disengage protect. is NOT ENOUGH MEMORY PUSH MENU TO EXIT Insufficient disk memory. (1.44MB) Copy capacity was exceeded, If NOT ENOUGH MEMORY is displayed, delete unnecessary images. Or, decrease or change the images to be copied. NOT ENOUGH DISK SPACE CONTINUE : SHTR EXIT : MENU Insufficient space on target disk compared to source disk.
CCD 1/2.7 inch (9.34 mm) 1,320 k Pixels Lens f=5.2-15.6 mm (equivalent still camera.)/F2.8-4.7 Focus Auto / Preset (Zone) Focusing Area Iris (Shutter Speed) ShutterSpeed White Balance LCD Viewfinder to a 34-102 mm lens on a 35 mm 7.9 inch (20 cm) --_ (approx.) F2.8/F8 (wide) 1/30-1/750 seconds (Auto), 1/4-1/750 mode) Auto/Indoor/Outdoor/White Set seconds (Slow Shutter Flash 2.5 inch (63.
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanteda. Km. 9.
Centralized Factory Panasonic MAIL TO : Servicenter Services Company 1705N.Randall Road, Elgin, IL 60123-7847 Attention: Digital Camera Repair Please carefully pack and ship, prepaid and insured, to the Elgin centralized repair Factory Servicenter. While there will be added handling delays, you may bring your unit to one of the following locations who will then forward the unit to Elgin for repair.
0 A 2, 13, 15 2, 13, 15 67 2 2, 33 AC Adaptor (Supplied) AC Cable (Supplied) Accessory (optional) Accessory (Supplied) A/V Cable B 10 27 28 34 Battery Remaining Indication Beep Brightness (LCD Viewfinder) Built-in Flash On Screen Display (OSD) 10, 12 P Playback Playback Menu POWER Supply Print Mark (DPOF) 29, 30, 31, 32 12 13, 14, 15 66 R Recording Menu 11 S C Camera Strap Capturing Images Copy Image 2,16 22, 23, 24, 25, 27 42, 43 D DC POWER Cable Delete Image 2,15 40 Self Timer Setting the
Panasonic Consumer Electronics Company, of Matsushita Electric Division Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. ("PSC") Ave. 65 de Infanter_a, Km. 9.
