Initial Setup TV / DVD Combination Operating Instructions PV-20DF63/PV-27DF63 DVD Operation Model No. TV Operation Advanced Operation • Initial Setup and Connection Procedures are on pages 10 to 11. MULTI FORMAT PLAYBACK As an ENERGY STAR® Partner, Matsushita Electric Corporation of America has determined that this product or product model meets the ENERGY STAR® guidelines for energy efficiency. This operating instruction book is designed for use with models PV-20DF63 and PV-27DF63.
Important Safeguards and Precautions READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON UNIT INSTALLATION 1 POWER SOURCE CAUTION Operate only from power source indicated on unit or in this manual. If uncertain, have your Electric Utility Service Company or Video Products Dealer verify your home power source. 2 POWER CORD PLUG For safety, this unit has a polarized type plug (one wide blade), or a three-wire grounding type plug.
Safety Precautions/Mesures de sécurité Warning : To prevent fire or shock hazard, do not expose this equipment to rain or moisture. Caution : To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à la pluie ou à une humidité excessive.
Before Using Loading the Batteries Congratulations On your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you and your family years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your unit. 1) Open the cover. 2) Insert batteries as marked. Date of Purchase Dealer Purchased From Dealer Address 3) Close the cover. Battery replacement caution • Do not mix old and new batteries.
Table of Contents TV Operation ..................................................................................18 MTS Broadcast/TV Stereo System...............................................19 Closed Caption System ................................................................20 TV Timer Features .........................................................................22 On-Screen Display (OSD) .............................................................23 FM Radio ...................................
Information (Unit, Disc) Specifications Discs that can be played Display Picture Tube 20 inch diagonal pure flat Picture Tube (PV-20DF63) 27 inch diagonal pure flat Picture Tube (PV-27DF63) Tuner Broadcast Channels VHF 2 ~ 13, UHF 14 ~ 69 Midband A through I (14 ~ 22) Superband J through W (23 ~ 36) Hyperband AA ~ EEE (37 ~ 64) CABLE Channels Lowband A-5 ~ A-1 (95 ~ 99) Special CABLE channel 5A (01) Ultraband 65 ~ 94, 100 ~ 125 Disc type Disc formats supported by this unit Disc Logo DVD-Video • DVD
Definition of Terms Chapter Number Titles are subdivided into numbered sections. You can quickly search for a favorite scene using these numbers. DVD A high-density optical disc on which high-quality pictures and sound have been digitally recorded. DVD incorporates new video compression technology (MPEG II) and high-density recording technology which allow entire movies to be recorded with incredible playback quality. Playback Control With Video CD (version 2.
Location of Controls Remote Control Buttons OPEN/CLOSE DVD Opens or closes the disc tray. Sets to DVD mode. POWER LIGHT Turns the unit on or off. See below. FM/TV DSS/CABLE Sets to TV mode. Receives FM radio signal. Set the remote to control some basic DSS or Cable box functions. OPEN/CLOSE MUTE LIGHT TIMER Mutes the sound instantly. FM/TV CHANNEL UP/DOWN 10 TE MU Selects a channel. VOLUME UP/DOWN VOL VOL CH UNE + R-T Creates a deeper, 3-D sound effect.
Front View of the unit and Indicators Initial Setup Disc Tray Phones Jack Connect an earphone or headphones. Audio/Video Input Connector 2 (LINE 2) Connect from other component. S-Video Input Connector 2 (LINE 2) Connect from other component with S-Video. POWER Turns the unit on or off. VOLUME UP/DOWN Adjusts volume. CHANNEL UP/DOWN Selects a channel. PAUSE Pauses picture in Play mode and frame advance picture in Still mode. STOP Stops playback.
Initial Setup (Ready to Play) Please make all cable or antenna connections before powering on. Connections For ANT./Cable Connect the cable from Antenna/Cable to the VHF/UHF terminal on the unit. IN from ANT./CABLE VHF/UHF VHF/UHF For DSS/Cable Box Connect the OUT jack on your cable box to the VHF/UHF terminal on the unit with a RF cable. Cable TV Converter Box WARNING Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only. IN from ANT.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Manual Clock Set LIGHT FM/TV DSS CABLE DVD 10 TE MU If AUTO CLOCK SET was incomplete, manually set the clock as follows.
Reset Language, Channels, Clock, 1 Press ACTION* M A I N MENU DVD LOCK LANGUAGE TV 2 CH CLOCK SELECT : END : ACT I ON to display MAIN MENU. 1 53 SET : SET ■ Language ■ Channels 1) Press to select language icon. ■ Clock to 1) Press select “CH.” 1) Press to select “CLOCK.” M A I N MENU M A I N MENU M A I N MENU DVD DVD LOCK LANGUAGE 5 TV 1 53 TV SET : SET 2) Press SET.
Time Zone Adjust OPEN/CLOSE FM/TV 10 (Daylight Saving Time). To Make Corrections, repeatedly press to move to error, then correct. 5) Press ACTION twice to start the clock and exit this mode. VOL VOL CH R-T UNE + CH (Only when Auto Clock is set.) NUMBER keys ADD/DLT M A I N MENU AUDIO ANGLE SUB TITLE DISPLAY TITLE DVD LOCK LANGUAGE 53 TV MENU CLEAR 1) Press to select “CLOCK.
Audio Connections Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and speakers. There are two types of connection, digital and analog. ■ Digital connection ■ Analog connection Connect an amplifier with Dolby Digital and DTS decoders to enjoy surround sound.
IMPORTANT NOTE: Turn down the volume, then turn this unit, as well as other equipment to be connected, off before proceeding with connection. Do not block ventilation holes of any equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables.
Basic DVD Operation Check List Cable or antenna is connected. Power cord is plugged in. If unit is connected to an audio amplifier, turn the stereo system’s power on. 1 2 Press POWER* on the remote or unit. Insert a disc. • If a disc is already inserted, go to step 3. (Depending on the disc, playback may start automatically.) 1) Press OPEN/CLOSE. 2) Place disc into disc tray.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. ■ Forward/Reverse rapid scene search or ➞ Press SLOW/SEARCH SLOW/SEARCH during play. ➞ Press PLAY to release. • Starting forward/reverse search during play started from menu on Video CDs may recall menu. • Search speed, slow at first, increases with each additional press of the button up to 5 levels. | or SKIP- | during ➞ Press SKIP+ play.
TV Operation 1 *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Press POWER* on the remote or unit. Check List Cable or antenna is connected. Power cord is plugged in. 2 CH08 Use CH or NUMBER keys to select a channel. CH POWER Press VOL + or VOL - to adjust volume.
MTS Broadcast/TV Stereo System Equipped with -TV Noise Reduction for true MTS reproduction. -TV Noise Reduction is required for good stereo separation and audio fidelity. is a registered trademark, and is licensed by Technology Licensing. Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow.
Closed Caption System Closed Caption is ... This multi-use system not only allows the hearing impaired to enjoy selected programs, but also makes useful information from TV stations available to everyone. Closed Caption Mode Feature 1 2 Press ACTION* to display MAIN MENU.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Caption On Mute Feature Closed Caption narration, if available, is displayed when MUTE button is pressed. 1 OPEN/CLOSE Press ACTION to display MAIN MENU.
TV Timer Features ON-TIMER with Alarm Check List The clock is set to the correct time. This unit can be set to automatically power on in one of 3 modes (TV, FM radio, or DVD/Video CD/CD.) You can also combine the On-Timer with a one minute alarm that gradually increases in volume. 1 2 Press TIMER* to display SET TIMER screen. 1) Press to select “ON TIMER.” 2) Press SET to display ON TIMER screen.
On-Screen Display (OSD) *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. TV Status & Clock Display Press DISPLAY to display or remove the overlay. Channel Current Time CH08 Receivable Broadcast Types (See page 19.
FM Radio FM Radio is ... This unit has an FM radio with built-in antenna, 9 station preset, and a band range of 87.5 ~ 108.1 MHz. You can set the On-Timer (page 22) to wake up to your favorite radio station. FM Radio Setup 1 Press FM/TV* on the remote to display FM radio mode. 2 1 2 : 0 0PM 3 1 2 : 0 0PM FM 1 FM 1 87. 5MHz 8 7. 7MHz MEMORY : PRESS ADD / DLT KEY 1 2 : 0 0PM FM 1 8 7. 7MHz MEMOR I ZED Press a NUMBER key (1~9) to select the FM preset number.
FM Antenna Setup Make sure FM tuning is done correctly (see FM Radio Setup). OPEN/CLOSE FM/TV FM/TV 10 DVD DSS CABLE DVD TE MU LIGHT Press ACTION to display MAIN MENU. TIM ER CH 2 VOL VOL CH UNE + R-T S U R RO UND CH 1 M A I N MENU LOCK LANGUAGE DVD NUMBER keys AUDIO AUDIO ANGLE SUB TITLE DISPLAY TITLE MENU CLEAR SET ACTION SELECT 3 RETURN SKIP PLAY SKIP+ PAUSE STOP ZOOM SET SLOW/SEARCH SET : SET 1) Press to select FM ANTENNA.
Cable Box Universal Remote Control Feature Universal Remote Control is... The Remote Control may be set up to control some basic DSS or Cable box functions. The Universal Remote Control Setup 2 Set up remote. Hold down DSS CABLE and press NUMBER keys to enter code. DVD OPEN/CLOSE • If code number is 100 or greater, e.g., press 1 - 0 - 2 for 102. FM/TV FM/TV DSS CABLE DVD 10 TE MU DSS CABLE TIM ER CH S U R RO UND VOL VOL + CH Confirm code entry.
DSS Brand Code Numbers Toshiba.................................................................90 Hitachi/ Hughes..............................................91, 99 Primestar..............................................................92 Drake....................................................................93 Magnavox.......................................................94, 95 Uniden............................................................94, 95 Optimus.............................................
Special Features Remote Warning Feature When Universal Remote Control (page 26) is used, and this feature is set to “ON,” a warning appears whenever an invalid key is pressed in DSS or Cable mode. 1 2 Press ACTION* to display MAIN MENU. M A I N MENU LOCK LANGUAGE DVD 53 TV SELECT : END : ACT I ON 3 1 CH CLOCK When “ON” is selected, the picture is displayed even when a broadcast signal is weak or non-existent. 1 Press ACTION to display MAIN MENU.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. OPEN/CLOSE FM/TV DSS CABLE DVD 10 TE MU V.S.S. (Virtual Surround Sound) [DVD only] LIGHT TIM ER CH UNE + CH CH R-T S U R RO UND VOL VOL Enjoy a surround-like effect if you are using two front speakers only. The effect is broadened and sound seems to come from virtual speakers on either side if the disc has surround signals recorded on it.
V-Chip Control Feature V-Chip Control Feature is... Process of V-Chip Control Feature This unit has a built-in V-Chip Control which allows you to block unwanted TV usage based on US MOVIES and US TV PROGRAMS Ratings. Enter Code Setup Blocking Enter Secret Code A 4-digit code must be entered to view a blocked program or change rating settings. OPEN/CLOSE FM/TV Press ACTION* to display MAIN MENU.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. If LOCK menu is not displayed, perform “Enter Secret Code” steps on page 30. US MOVIES Ratings 1 LOCK US MOV I ES : OFF CHANGE SETT I NGS : OFF US TV PROGRAMS CHANGE SETT I NGS : OFF DVD LOCK CHANGE SETT I NGS NEXT PAGE SELECT : SET : SET END : ACT I ON 1) Press to select US MOVIES. 2) Press SET to set “ON” or “OFF.” • “NEXT PAGE” displays CANADIAN V-Chip setting menu.
V-Chip Control Feature (continued) If LOCK menu is not displayed, do “Enter Secret Code” steps on page 30. Process of V-Chip Control Feature US TV PROGRAMS Ratings US TV PROGRAMS RATINGS: Chart 1 1 LOCK US MOV I ES : OFF CHANGE SETT I NGS US TV PROGRAMS : OFF CHANGE SETT I NGS DVD LOCK : OFF CHANGE SETT I NGS NEXT PAGE SELECT : SET : SET END : ACT I ON 1) Press * to select US TV PROGRAMS. 2) Press SET to set “ON” or “OFF.” ■ “ON” ➞ V-Chip Control is activated. ■ “OFF” ➞ V-Chip Control is deactivated.
*Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again.
Video/Audio Menu This feature allows easy setting of picture and sound suitable for each program source. Audio Menu Press ACTION* to display MAIN MENU. M A I N MENU LOCK LANGUAGE DVD 53 TV SELECT : END : ACT I ON 3 1) Press to select “SET UP VIDEO/AUDIO.” 2) Press SET to display. SET UP TV 4 SET : SET SET UP V I DEO / AUD I O V I DEO V I DEO AUD I O AUD I O MENU : NORMAL ADJUST MENU : MUS I C ADJUST SELECT : SET : SET END : ACT I ON 1) Press to select “VIDEO MENU.
Video/Audio Adjustment *Important: If a remote control button does not work when pressed, press the FM/TV button on the remote and try the button again. Audio Adjustment Video Adjustment 1 2 Press ACTION to display MAIN MENU.
Disc Operation Subtitle Language (DVD only) You can select a different subtitle language (if offered) than the one set at the Settings for DVD Operation. (See page 48.) Press SUB TITLE* in Play mode to display the subtitle selection on-screen. 1 Check List Please read “Basic DVD Operation” on page 16. [Subtitle language] [Audio soundtrack language] ENG FRA DEU ITA ESP NLD SVE NOR DAN POR RUS JPN CHI KOR MAL VIE THA • Display disappears after 5 seconds.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. appears on the screen while a When button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. Multiple Angle Viewing (DVD only) DVDs may contain scenes shot from multiple camera angles allowing the same scene to be viewed at different angles. You can view these angles, if available, using the ANGLE button.
Disc Operation (continued) Title menu (DVD only) Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number. (Operation may vary according to the disc.) DSS CABLE DVD 10 TE MU TIM ER CH S U R RO UND Love r s Cas t l es FM/TV LIGHT B i r ds VOL VOL + CH UNE Dogs OPEN/CLOSE Press TITLE* in Play mode to display title screen.
*Important: If a remote control button does not work when pressed, press the FM/TV, DVD button on the remote and try the button again. Program Play (Video CD/CD) Check List Unit is in TV mode, press FM/TV. Video CD or CD is inserted. You can program specific tracks and order of play. 1 2 Press ACTION in Stop mode to display MAIN MENU.
Disc Operation (continued) Random Play (Video CD/CD) Tracks are played in a random order. LOCK LANGUAGE 53 TV FM/TV 10 SET : SET DVD MAIN MENU 4:3 Pan & Scan TIM ER CH 1) Press to select “PLAY MODE.” 2) Press SET to display screen. VOL VOL + CH ADD/DLT AUDIO ANGLE SUB TITLE DISPLAY TITLE SELECT SET END LIGHT DSS CABLE DVD TE MU S U R RO UND 3 OPEN/CLOSE CH CLOCK SELECT : END : ACT I ON 1 UNE DVD 1) Press to select “DVD.” 2) Press SET to display screen.
DVD Operation using On-Screen Displays When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number, elapsed playing time) and unit information (Repeat Play, Play mode). 1 Check List Unit is in DVD mode, press DVD. Press DISPLAY in Play or Stop mode to display “On-Screen Display.” • Each press of DISPLAY changes the on-screen display as follows. (Please refer to page 42 or 43.
DVD Operation using On-Screen Displays (continued) Detailed Descriptions of Each On-Screen Display Disc information screen (for DVD) 1. TITLE No. • Select “TITLE,” and press SET*. • Change the No. by pressing or NUMBER keys, and press SET. 1 3 T I TLE : 1 CHAPTER : 12 DVD 1 : 12 : 55 4 2 2. Chapter No. • Select “CHAPTER,” and press SET. • Change the No. by pressing or NUMBER keys, and press SET. 3. Disc currently being played 4.
*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. Detailed Descriptions of Each On-Screen Display Unit information screen • Select “REPEAT,” and press SET. • Change the desired mode during play by pressing , and press SET. a. Repeat Play DVD Video CD/CD CHAPTER REPEAT TRACK REPEAT TITLE REPEAT DISC REPEAT REPEAT OFF REPEAT OFF PLAY REPEAT : CHAPTER a SET : SET END : DISPLAY b.
MP3/WMA/JPEG Playback Operation This unit can play MP3/WMA/JPEG format CD-R or CD-RW recorded for personal use on a PC, etc. Some discs may not play due to recording condition. 1 2 3 ROOT My favorite Press POWER* on the remote or unit. Press OPEN/CLOSE, and then place an MP3/WMA/JPEG disc into the disc tray. Press OPEN/CLOSE to close. • MP3/WMA/JPEG menu is displayed. • Playback starts automatically (except JPEG files). • CD directory is displayed. CAR1.jpg CAR2.jpg END_WALTZ.
MP3/WMA Playback JPEG Playback to select an MP3/WMA file 1 (Press/ ) in STOP mode. You can play JPEG images. Displayable Image Size: 32x32~7680x7680 pixels 2 • Some JPEG format may not be played back. Do steps 1~3 on page 44. Press SET or PLAY to start playback. ■ Forward/Reverse Search Press SLOW/SEARCH or SLOW/SEARCH during play. Press PLAY to release. • Search speed, slow at first, increases with each additional press of the button up to 5 levels.
MP3/WMA/JPEG Playback Operation (continued) JPEG Playback - Slide-show - JPEG Playback - Zoom (During JPEG Playback.) You can enlarge specific portions of a JPEG picture and select the zoom ratio using the ZOOM button on the remote during JPEG Playback. Set Zoom size. Press ZOOM repeatedly to change display as follows. Press STOP to return to the MP3/WMA/JPEG MENU. • You can enlarge the center portion of the image to one of 2 magnifications. • Operation can be done during Rotation (below). X 1.
DVD Lock Feature *Important: If a remote control button does not work when pressed, press the FM/TV, DVD button on the remote and try the button again. You can prevent playback of DVDs with a specific rating level which may be unsuitable for children. • Some DVDs are encoded with a rating level. If the disc rating is higher (stricter) than the one you preset, playback will be prohibited. Caution Discs not encoded with a rating level will play even if the jacket states it is for mature audiences.
Settings for DVD Operation 1 2 Press ACTION* in Stop mode to display MAIN MENU. M A I N MENU DVD LOCK LANGUAGE 53 TV 3 CH CLOCK SELECT : END : ACT I ON 1 Check List SET : SET DVD MAIN MENU DISC LANGUAGES AUDIO OUTPUT ST I L L MODE : AUTO TV MODE : 4:3 Pan & Scan SELECT SET END 1) Press to select “DVD.” 2) Press SET to display screen. Once initial settings are done, they remain in memory (even after the power is off) until changed.
*Important: If a remote control button does not work when pressed, press the FM/TV, DVD button on the remote and try the button again. AUDIO ANGLE SUB TITLE DISPLAY TITLE 1 2 MENU ENTER ADD/DLT Select the digital output to be output from the optical digital audio output connector of the unit. CLEAR AUDIO OUTPUT Do steps 1 and 2 on page 48.
Settings for DVD Operation (continued) STILL MODE Set to reduce jitter in a displayed still picture or a motion picture. Do steps 1 and 2 on page 48. 1) Press * to select “STILL MODE.” 2) Press SET repeatedly for mode. (See below) OPEN/CLOSE FM/TV : : SET : ACTION 10 TIM ER CH “FIELD” (Field still) or “FRAME” (Frame still) is automatically selected during the still mode. (Factory preset) FIELD: “FIELD” (Field still) is always selected.
Language Code List Enter the appropriate code number for the initial settings “AUDIO,” “SUBTITLE” and/or “MENUS” (see page 48).
Before Requesting Service Check the following points once again if you are having trouble with your unit. Power Correction No power… • Completely insert Power Plug into an AC outlet. • Set POWER button to ON. Power turns itself off... • Auto power-off (shut off) occurs after about 5 min. in DVD mode with no operation, or if there is no broadcast signal in TV mode. Turn the power back on. (P. 17, 28) Monitor Correction • Make sure your antenna system (TV or CABLE), is correctly set. (P.
DVD/Video CD/ CD Correction Play fails to start even when PLAY is pressed... • This unit cannot play discs other than DVDs, Video CDs and CDs. • The disc may be dirty and require cleaning. Play starts but then stops immediately... • Be sure disc is installed with label side up. Picture is distorted during rapid advance • The picture will be somewhat distorted at times: this is normal. or rapid reverse... No Forward/Reverse search play...
Warning and Instruction Displays These displays will alert you of a missed operation or provide further instructions. OSD Caution PLEASE SET CLOCK BEFORE TIMER SETTING If you attempt to set the On-Timer and the Clock is not set... (P.12) PLEASE CHECK THE DISC, AND FOR STAINS OR SCRATCHES ON DISC If you press PLAY, or the unit reads data from a stained or scratched disc in DVD mode. Also, if the type of disc is other than DVD, Video CD or CD... (P.
Spanish Quick Use Guide/Guía para rápida consulta Conecte por favor todas las conexiones del cable o de la antena antes de energizar los aparatos. Conectando ■ Conexión para Ant./Cable Conecte Ant./Cable a la entrada de antena de la TV (VHF/UHF). Ant./Cable VHF/UHF VHF/UHF ■ Conexión para Sistema Digital de Satelite (DSS)/Convertidor de cable Conecte la salida del convertidor de cable la entrada “VFH/UHF” con el RF cable. Convertidoe de cable VHF/UHF Ant.
Spanish Quick Use Guide/Guía para rápida consulta Ajuste Manual del Reloj Si el ajuste automático del reloj no se ha completado, ajuste el reloj manualmente de la siguiente manera. 1 2 Presione ACTION en el control remoto para visualizar la pantalla del menú RELOJ. Presione ▲▼ para seleccionar el mes y SET para colocarlo. De la misma forma, seleccione y ajuste la fecha, año, hora y DST (Hora de Verano). 3 Presione dos veces la tecla ACTION para poner el RELOJ en marcha y salir.
Operaciones básicas del DVD 1 2 Presione POWER en el control remoto o el aparato y luego el boton DVD. Introducir un disco. 1) Presione OPEN/CLOSE. 2) Ponga un disco en la bandeja de disco. • Sujete el disco sin tocar ninguna de sus superficies, póngalo con el lado donde esté impreso el título hacia arriba, alinéelo con las guías y póngalo en su posición apropiada. Disco de 3”(8 cm) Disco de 5” (12 cm) 3 Presione PLAY para Iniciar la reproducción. La bandeja del disco se cierra automáticamente.
Spanish Quick Use Guide/Guía para rápida consulta Visión desde otro ángulo [DVD solamente] Algunos discos DVD tienen escenas que han sido filmadas simultáneamente desde un número de ángulos diferentes. Con estos discos, la misma escena podrá verse desde cada uno de estos ángulos diferentes utilizando el botón ANGLE. 1 ANGULO: 1 Presione ANGLE durante la reproducción para visualizar la pantalla de ángulo.
Reproducción programada [Vídeo CD/CD] Reproducción arbitraria [Vídeo CD/CD] Puede usted programar pistas específicas y el orden de reproducción. Las pistas se reproducen de forma arbitraria. 1 1 2 2 Presione ACTION en el modo paro (STOP) para visualizar MAIN MENU.
Spanish Quick Use Guide/Guía para rápida consulta Funcionamiento del DVD utilizando visualizaciones en pantalla Cuando se presiona DISPLAY, la visualización en pantalla muestra la información del disco (título / capítulo / número de lista, tiempo transcurrido de reproducción, audio / idioma del subtítulo, y ángulo) e información (repetir la reproducción, modo reproducción, Karaoke vocal encendido / apagado, etc.). 1 Presione DISPLAY en el modo reproducción o parada para visualizar en pantalla.
Selección de 4 : 3 PREFERENCIA 4:3 Pan&Scan : Datos de la pantalla ancha de vídeo son reproducidos en el estilo Pan & Scan (la parte derecha e izquierda de la pantalla son recortadas). (Fijación de fábrica) • Datos de vídeo no formateados en Pan & Scan serán reproducidos en el estilo letterbox. 4:3 Letterbox : Datos de la pantalla ancha de vídeo son reproducidos en el estilo Letterbox (la parte de arriba y abajo de la pantalla tienen un margen negro).
Limited Warranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.
Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the picture tube resulting from viewing fixed images (including, among other things, letterbox pictures on standard 4:3 screen TV’s, or non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location).
Index TV A Accessories......................................... 4 AC Power Plug .................................... 9 ACTION button.............................. 8, 12 ADD/DLT/CLEAR button ............... 8, 13 Audio Adjustment .............................. 35 Audio Auto Gain Control (AGC) ........ 34 AUDIO button .......................... 8, 19, 25 Audio Connections ....................... 14-15 Audio Features ............................. 34-35 Audio Menu .......................................
DVD A ANGLE button ......................... 8, 37, 46 ANGLE Indicator ........................... 9, 37 Auto-Power Off function .................... 17 AUDIO button .......................... 8, 36, 37 AUDIO OUTPUT ............................... 49 Audio soundtrack language (DVD) .... 36 B Basic DVD Operation ........................ 16 C CLEAR button .......................... 8, 39-41 D Definition of terms ............................... 7 Disc Audio attribute 1 type, sampling frequency, bit No.........
NOTES 66 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.
NOTES 67
LSQT0670B Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.