Owner's manual

DEUTSCH
ENGLISH
Funktionsprinzip des
Weißabgleichs
(Farbtonjustierung)
Das Videofilmen erfolgt unter verschiedensten
Beleuchtungstypen, von natürlichen Lichtquellen wie
Sonnenschein bis zu einem großen Bereich an
künstlichen Lichtqueilen wie Leuchtstofflampen. Da jede
dieser Lichtquellen eine unterschiedliche Farbtemperatur
besitzt, färben sie den Bildgegenstand unterschiedlich
ein.
Das Menschenauge kann sich ohne jegliche
Schwierigkeiten auf verschiedenste Arten von
Beleuchtung einstellen, und es sieht daher die Farbe
eines Gegenstandes sogar unter verschiedensten
Lichtquellen immer gleich.
Das Auge des Camerarecorders (Objektiv) hingegen
besitzt diese hervorragende Anpassungsfähigkeit nicht.
Daher wird das Bild entsprechend der Lichtquelle mit
einem leichten Blaustich oder Rotstich aufgezeichnet.
Um den Einfluß des Lichtes auf die Farben des Motivs
zu minimieren, muß am Camerarecorder eine als
Weißabgleich bezeichnete Einstellung durchgeführt
werden.
■ Automatischer Weißabgleich
Wenn der Camerarecorder auf den Vollautomatik-ModuS
umgeschaltet wird, ermittelt ein internes Meß- und
Justiersystem die Farbtemperatur des Lichtes und
kompensiert den Farbton des Motivs entsprechend.
Weiß ist die Grundfarbe des Lichtes. Und da diese
Einstellung auf Weiß erfolgt, wird sie als Weißabgleich
bezeichnet. Die optimalen Einstellungen für einige
Lichtquellen sind im Camerarecorder gespeichert. Der
eingebaute Mikrocomputer vergleicht die Farbtemperatur
des vom Weißabgleichsensor vorne am Camerarecorder
empfangenen Lichtes mit den gespeicherten
Farbtemperaturen und wählt die Einstellung für die
ähnlichste Farbtemperatur.
Darauf achten, daß Sie den Weißabgleich-Sensor beim
Aufnehmen nicht mit der Hand o.ä. Zudecken.
How the White Baiance (Tint)
Works
Video recording takes place under various light sources,
from sunlight as the main naturai light source to a wide
range of artificial light sources such as fluorescent
lamps. As each of these light sources has a different
colour temperature, each of them gives the colours of
the subject a slightly different tint.
Human eyes can easily adjust to different kinds of
lighting and recognize an object as having the same
colour, even under different light.
The eye of the Movie Camera (lens), however, cannot
adapt to the change in lighting and is influenced by the
lighting. Therefore, depending on the light source, the
picture is recorded with a bluish or reddish tint.
■ Auto White Balance
When the Movie Camera is in the Full Auto Mode, the
internal system of the Movie Camera automatically
determines the temperature of the light and
compensates the tint of the subject accordingly. White is
the basic colour by which the tint is determined. Because
this adjustment is performed based on the white colour, it
is called White Balance Adjustment. The optimum
settings of several light sources are stored in the
memory of the Movie Camera. The internal
microcomputer compares the colour temperature of the
light received by the White Balance Sensor positioned on
the front of the Movie Camera with the colour stored in
memory, and selects the setting for the most similar tint.
Be careful not to cover the White Balance Sensor with , .
your hand, etc.
-84-