Operating Instructions

– 1 –
5.8 GHz Digital Cordless Answering System
Model No.
KX-TG5471
Quick Set-Up Guide
Please read the Operating Instructions for further details.
PQQW13668ZA
SM1004SR0
Step 1
Setting Up the Base Unit
USE ONLY WITH Panasonic AC ADAPTOR PQLV1.
USE only the telephone line cord included in the unit.
Make sure that the AC adaptor and telephone line cords are plugged into the unit properly.
Step 2
Setting Up the Handset
Install the battery.
Insert the battery (1), and
press it down until it snaps
into the compartment (2).
Close the cover.
Charge the battery
for 6 hours before initial use.
The unit beeps once, the CHARGE indicator
lights and “Charging” is displayed.
When the battery is fully charged, “Charge
completed” is displayed if there are no new
calls in the Caller List.
Telephone
Line Cord
AC Adaptor
Connect as shown.
Fasten the AC adaptor
cord to prevent it from
being disconnected.
1
2
CHARGE Indicator
TG5471_QG.fm Page 1 Wednesday, November 24, 2004 5:44 PM

Summary of content (8 pages)