Operating Instructions

8.1 Programming
MSetN
MMenuN
1 MMenuN
2 Press MBN and the 3-digit code (page 58 to
page 73).
3 Press the appropriate selection to display the desired
setting.
R This step will vary depending on the feature.
4 MSetN
5 Press MMenuN to exit.
To select features through the web browser interface
(KX-MB2000/KX-MB2010/KX-MB2030, LAN
connection only)
You can change features through the web browser
interface instead of the unit.
1. Start Multi-Function Station. A [Utilities] A
[Configuration Web Page]
R You can also access the unit by entering its IP
address on the web browser.
2. Select the desired category from the menu bar.
[Device Configuration]: features of the unit
[Network Configuration]: network features
3. Type “root” as the user name, then enter the
password (feature #155 on page 59). A [OK]
4. Select the desired feature tab at the top of the right
frame.
5. Change the settings or edit the information.
R This step will vary depending on the feature.
6. [Submit]
R The new setting will be transferred to the unit.
7. Close the web browser.
Note:
R The settings displayed in the web browser will be
updated by clicking [Reload].
57
8. . Programmable Features
8. Programmable Features