PRL262_PRD262_QG(en).fm Page 1 Tuesday, February 18, 2014 10:19 AM Model No. KX-PRL260/KX-PRD260 KX-PRL262/KX-PRD262 Quick Guide Connections Base unit 1 Run the telephone line cord ( 1 ) and AC adaptor ( 2 ) through the slot of the stand. 2 Connect the telephone line cord ( 1 ) and AC adaptor ( 2 ) to the jacks at the bottom of the unit until you hear a click. 3 Connect the AC adaptor to the power outlet. 4 Connect the telephone line cord to the single-line telephone jack (RJ11C) until you hear a click.
PRL262_PRD262_QG(en).fm Page 2 Tuesday, February 18, 2014 10:19 AM Battery installation/Battery charging Charge for about 7 hours. 2 1 Note: L USE ONLY rechargeable Ni-MH batteries AAA (R03) size ( 1 ). L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L Confirm correct polarities (S, T). L Follow the directions on the display to set up the unit. L Confirm “Charging” is displayed ( 2 ). Operating tips Soft keys By pressing a soft key, you can select the feature shown directly above it on the display.
PRL262_PRD262_QG(en).fm Page 3 Tuesday, February 18, 2014 10:19 AM Date and time (Handset) 1 2 3 4 {MENU} (right soft key) (1)1 Enter the current month, date, and year. s {OK} Enter the current hour and minute (12-hour clock format). *: Select “AM” or “PM”. s {SAVE} s {OFF} Recording your greeting message for the answering system for the landline (Handset) If you use a pre-recorded greeting message, you do not need to record your own greeting message.
PRL262_PRD262_QG(en).fm Page 4 Tuesday, February 18, 2014 10:19 AM Link to cell Pairing a Bluetooth cellular phone 1 Handset: For CELL 1: {MENU} (right soft key) (6241 For CELL 2: {MENU} (right soft key) (6242 L After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone: While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.
PRL262_PRD262_QG(en).fm Page 5 Tuesday, February 18, 2014 10:19 AM Link to cell Connecting/disconnecting the cellular phone Auto connection to the Bluetooth devices (cellular phones) The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change the interval (default: “1 min”), see the operating instructions. L When you are using a cellular line, the base unit loses its connection from other Bluetooth devices (cellular phone).
PRL262_PRD262_QG(en).fm Page 6 Tuesday, February 18, 2014 10:19 AM Basic operations Making/Answering calls (Handset) Making cellular calls 1 2 Dial the phone number. s {CELL} L When the cellular line only mode is set, you can also press {C}/{s} instead of {CELL}. L When only 1 cellular phone is paired, the unit starts dialing. When 2 cellular phones are paired: {r}: Select the desired cellular phone. s {SELECT} Making landline calls Dial the phone number.
PRL262_PRD262_QG(en).fm Page 7 Tuesday, February 18, 2014 10:19 AM Basic operations Phonebook (Handset) Adding entries 1 2 3 4 5 Making calls 1 2 {<} k s {MENU} {r}: “Add new entry” s {SELECT} {r}: “(Name)” s {SELECT} Enter the party’s name (16 characters max.). s {OK} {r}: Select the desired phone number location. s {SELECT} 6 Enter the party’s phone number (24 digits max.). s {OK} 7 {r}: Select the desired label. s {SELECT} L To store 2 or 3 phone numbers, repeat steps 5-7.
PRL262_PRD262_QG(en).fm Page 8 Tuesday, February 18, 2014 10:19 AM Using Bluetooth devices Copying phonebook entries from a Bluetooth cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s phonebook. 1 Handset: {MENU} (right soft key) (618 2 Handset: To copy from paired cellular phones: {r}: Select the desired cellular phone.
PRL262_PRD262_QG(en).fm Page 9 Tuesday, February 18, 2014 10:19 AM Using Bluetooth devices Playing music from a Bluetooth device This feature allows you to: − use a Bluetooth device to play music through the base unit’s speaker. − use the handset as a remote control when playing music from a Bluetooth device through the base unit’s speaker. Playing music through the base unit’s speaker 1 Bluetooth device: Use your Bluetooth device’s media player app to play music.
PRL262_PRD262_QG(en).fm Page 10 Tuesday, February 18, 2014 10:19 AM Frequently asked questions Question Cause/solution Why is _ displayed? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L The handset is not registered to the base unit. Register it. 1 Handset: {MENU} (right soft key) (13) 2 Base unit: Press and hold {x} for about 5 seconds. 3 Handset: Press {OK}, then wait until a long beep sounds.
