Installation Guide Home Network System Backup Battery Model No. KX-HNP100 Thank you for purchasing a Panasonic product. This document explains how to install the backup battery properly. For details about how to use the system, refer to the User’s Guide (page 15). Please read this document before using the unit and save it for future reference. For assistance, please contact us at 1-800-272-7033 or visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.
Table of Contents Introduction Accessory information ...............3 Other information .......................3 Customer services ...................18 Limited Warranty (ONLY FOR U.S.A.) .....................................19 Important Information About this system ......................4 For your safety ...........................4 Important safety instructions ......6 For best performance ................6 Other information .......................
Introduction Accessory information Supplied accessories No. Accessory item/Part number A Rechargeable battery*1 *1 Quantity 1 See page 3 for replacement battery information. A Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 18). Accessory item Model no./Specifications Rechargeable battery KX-PRA10EX R Lithium Ion (Li-Ion) type battery R To order, please visit http://shop.panasonic.
Important Information About this system R This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation. R The system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed.
Important Information Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and 1.93 GHz with a peak transmission power of 115 mW. R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so.
Important Information battery terminals. This can result in the risk of overheating. R Charge the battery provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. Attention: The lithium ion/polymer battery you have purchased is recyclable. Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this battery.
Important Information temperature is less than 5 °C (41 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Notice: Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Routine care R Wipe the outer surface of the product with a soft moist cloth.
General product information General information about the backup battery The backup battery can provide power to your Home Network System devices (one device per backup battery), allowing your devices to continue to operate in the event of a power outage. Instead of connecting an AC adaptor to your hub, camera, etc., the backup battery is connected to your device and is also connected to the power outlet.
General product information service provided by cable company, Internet service provider, VoIP service provider, etc.), and if that device does not contain its own backup battery, the hub will not be able to make calls in the event of a power outage. Power outage notification to your mobile device In the event of a power outage, the backup battery can trigger the hub to send a notification to the [Home Network] app. In order to use this feature, the following items are required.
Setup Part names and functions A D B C E Power supply plug LED indicator Battery cover DC jack M N Used to register the backup battery to the hub. LED indicator You can use the LED indicator to confirm the backup battery’s status.
Setup Setup overview Inserting the battery 1 R USE ONLY the specified battery. R Wipe the battery ends ( , ) with a dry cloth. R Avoid touching the battery ends ( , ) or the unit contacts. 2 3 4 Initial setup Make sure you can access the system using your mobile device. For details, refer to the System Setup Guide included with your hub. Insert the battery The battery will supply power to the connected device in the event of a power outage.
Setup Connections Hub 1 1 4 2 3 Indoor Camera 1 Outdoor Camera Indoor Siren 1 1 Insert the backup battery’s DC plug firmly into the device’s DC jack, DC cable plug, or DC extension cord. Insert the DC plug completely. (This example illustration applies to the KX-HNB600 and KX-HNC210.) Connect the AC adaptor plug to the backup battery. Secure the AC adaptor cord by wrapping it around the hook. Connect the AC adaptor to the power outlet.
Setup Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. For assistance, please visit http://shop.panasonic.com/support HNP100_(en_en)_0202_ver.202.
Setup Registering the backup battery This procedure is not required for devices that were included as part of a bundle. Register each of your backup batteries to the hub if you want to receive notifications in the event of a power outage. Using the app When you register the backup battery by using the [Home Network] app, you can assign a name to the backup battery and turn its power outage notification feature on and off. For more information, refer to the User’s Guide (page 15).
Appendix Features available when using the [Home Network] app Some of the features that are available when using the [Home Network] app are listed below. For more information, refer to the User’s Guide. – Device management You can use the app to change the backup battery’s name. – Notifications The [Home Network] app can receive notifications in the event of a power outage and when power has been restored.
Appendix Specifications R Standards DECT (Digital Enhanced Cordless Telecommunications) R Frequency range DECT: 1.92 GHz – 1.93 GHz R RF transmission power DECT: 115 mW (max.) R Power source 120 V AC, 60 Hz*1 Lithium Ion (Li-Ion) type battery (1 ´ 3.7 V, 1,450 mAh) R Operating conditions 5 °C – 40 °C (41 °F – 104 °F) R Dimensions (height ´ width ´ depth) Approx. 115 mm ´ 71 mm ´ 25 mm (4 17/32 inches ´ 2 13/16 inches ´ 1 inch) R Mass (weight) Approx. 123 g (0.
Appendix FCC and other information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. interference by one or more of the following measures: – Reorient or relocate the receiving antenna.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to http://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Ba!eries, Backup Chargers & more… Customer Services Directory For Product Informa"on, Opera"ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to http://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Notes 21 HNP100_(en_en)_0202_ver.202.
Notes 22 HNP100_(en_en)_0202_ver.202.
Notes 23 HNP100_(en_en)_0202_ver.202.
IMPORTANT! If your product is not working properly. . . 1 Charge the battery. 2 Use the Home Network app to access the User’s Guide and refer to the Troubleshooting section. Visit our Web eb site: http://shop.panasonic.com/support LFAQ and troubleshooting hints are available. For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.
Guía de instalación Sistema de red doméstico Batería de respaldo Modelo n° KX-HNP100 Gracias por adquirir un producto Panasonic. Este documento explica cómo instalar la batería de reserva de forma correcta. Para obtener detalles sobre cómo usar el sistema, consulte la Guía del usuario (página 10). Lea este documento antes de usar la unidad, y guárdelo para consultarlo en el futuro. Para obtener ayuda, comuníquese con nosotros llamando al 1-800-272-7033 o visite nuestro sitio web: http://shop.panasonic.
Tabla de Contenido Información general del producto Información general sobre la batería de reserva ........................................3 Notificación de interrupción del suministro de energía por teléfono ............................................3 Notificación de interrupción del servicio de energía a su dispositivo móvil ................................................4 Alcance de la comunicación inalámbrica ......................................
Información general del producto Información general sobre la batería de reserva La batería de reserva puede suministrar energía a los dispositivos de un sistema de red doméstico (un dispositivo por batería de reserva), lo que permite a los dispositivos continuar operando aun con una interrupción del suministro de energía. En vez de conectar un adaptador de corriente alterna al hub, a la cámara, etc., la batería de reserva se conecta tanto al dispositivo como a la toma de corriente.
Información general del producto una interrupción del servicio de energía. Para obtener más información, consulte la Guía del usuario (página 10). – El hub debe ser capaz de realizar llamadas utilizando el teléfono fijo aunque haya una interrupción del servicio de energía.
Configuración Nombres de los componentes y funciones A Led indicador Puede utilizar el Led indicador para confirmar el estado de la batería de reserva. D B C E Enchufe de alimentación Led indicador Cubierta de la batería Clavija de corriente continua M N Se utiliza para registrar la batería de reserva al hub.
Configuración Resumen de configuración 1 2 3 4 Configuración inicial Asegúrese de poder acceder al sistema mediante su dispositivo móvil. Para obtener más detalles, consulte la Guía de configuración del sistema que viene con su hub. Inserte la batería En caso de una interrupción del servicio de energía, la batería suministrará energía al dispositivo conectado. Conexiones Conecte la batería de reserva a la toma de corriente y al dispositivo que recibirá la energía.
Configuración Conexiones Hub 1 1 4 2 3 Cámara interior 1 Cámara exterior Sirena de interior 1 1 Inserte firmemente el enchufe de CC de la batería de reserva en la clavija de corriente continua, el enchufe del cable de CC o el cable de extensión de CC del dispositivo. Inserte completamente el enchufe de CC. (La figura de ejemplo aplica para KX-HNB600 y KX-HNC210.) Conecte el enchufe del adaptador de corriente alterna a la batería de reserva.
Configuración Nota acerca de las conexiones de alimentación Adaptador de corriente alterna R El adaptador de corriente debe permanecer conectado en todo momento (es normal que el adaptador se caliente durante su uso). R El adaptador de corriente debe estar conectado a un enchufe de corriente orientado verticalmente o en una toma de corriente alterna colocada en el piso.
Configuración Registro de la batería de reserva Este procedimiento no es necesario para unidades que son parte de un paquete. Si quiere recibir notificaciones en caso de una interrupción del servicio de energía, registre cada una de las baterías de respaldo al hub. Uso de la aplicación Cuando registra la batería de reserva con la aplicación [Home Network], puede asignarle un nombre a la batería de reserva y activar o desactivar la función de notificación de interrupción del servicio de energía.
Apéndice Acceso a la Guía del usuario La Guía del usuario es una colección de documentación en línea que lo ayuda a aprovechar al máximo la aplicación [Home Network]. 1 iPhone®/iPad® Toque en la pantalla de inicio de la aplicación. Dispositivos Android™ Toque u oprima el botón menú de su dispositivo en la pantalla de inicio de la aplicación. 2 Toque [Guía del Usuario]. Nota: R No se admite Microsoft® Windows® Internet Explorer® 8 y versiones anteriores. R Se recomienda Android 4.1 y versiones posteriores.
Notas 11 HNP100_(es_es)_0202_ver.201.
HNP100_(es_es)_0202_ver.201.