Operating Instructions

Menu – [VIDEO OUT/LCD/VF] menu
99
[HDMI SETTING] / [HDMI OUT]
[OUT FORMAT]
Selects the signal to output from the <HDMI> terminal. The items that can be selected differ depending on the [SYSTEM] menu
¨ [FREQUENCY]/[FILE FORMAT]/[REC FORMAT] setting.
(Factory setting: [1920×1080p])
[HDMI TC OUT]
Sets whether time code information is output from the <HDMI> terminal.
The items that can be set are as follows.
≥[ON], [OFF]
(Factory setting: [OFF])
[HDMI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <HDMI> terminal (such as recorder) is to be
controlled or not. This can be set when [HDMI TC OUT] is enabled.
(Factory setting: [OFF])
[HDMI OUT CHAR]
Sets whether to superimpose the character to the output from the <HDMI> terminal.
(Factory setting: [OFF])
[HDMI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <HDMI> terminal. The settings of the zebra signal follow
the zebra signal settings in the [VIDEO OUT/LCD/VF] menu ¨ [EI ASSIST].
(Factory setting: [OFF])
[3840×2160p] Outputs in 3840×2160p (4:2:2/10 bit).
[3840×2160p(420/8bit)] Outputs in 3840×2160p (4:2:0/8 bit).
[1920×1080p] Outputs in 1920×1080p.
[1920×1080i] Outputs in 1920×1080i.
[1280×720p] Outputs in 1280×720p.
[720×480p] Outputs in 720×480p.
[720×576p] Outputs in 720×576p.
• For the combinations that can be set (ÎFormat that can be output from the HDMI terminal: 240)
[ON] Controls the recording operation of the external equipment.
[OFF] Does not control the recording operation of the external equipment.
• This cannot be set when the [RECORDING] menu ¨ [REC FUNCTION] ¨ [REC MODE] is set to [INTERVAL].
• (For the )
When all of the following menu settings have been made, it is possible to control recording by external devices connected to
the <SDI OUT> terminal and the <HDMI> terminal.
– [VIDEO OUT/LCD/VF] menu ¨ [VIDEO OUT SEL] ¨ [SDI + HDMI OUTPUT] ¨ [ON]
– [VIDEO OUT/LCD/VF] menu ¨ [SDI SETTING] ¨ [SDI REC REMOTE] ¨ [ON]
– [VIDEO OUT/LCD/VF] menu ¨ [HDMI SETTING] ¨ [HDMI TC OUT] ¨ [ON]
– [VIDEO OUT/LCD/VF] menu ¨ [HDMI SETTING] ¨ [HDMI REC REMOTE] ¨ [ON]
[ON] Superimposes.
[OFF] Does not superimpose.
[ON] Superimposes.
[OFF] Does not superimpose.