Operating Instructions

Menu – [CAMERA] menu
82
[i.ZOOM]
When [i.ZOOM] is set to [ON], you can zoom to a maximum of approximately 32× (24× when recording with UHD) while
maintaining the beauty of high-definition image quality.
When [i.ZOOM] has been assigned to a USER button, [ON]/[OFF] can be switched with the USER button.
(Factory setting: [ON])
[FOCUS RING DRIVE]
Switches the way focus is adjusted with the focus ring.
• Also set [FOCUS RING SETTING].
(Factory setting: [NON-LINEAR])
[FOCUS RING SETTING]
•
When [FOCUS RING DRIVE] is set to [NON-LINEAR]
Sets the way focus is adjusted with the focus ring.
(Factory setting: [SPEED])
• When [FOCUS RING DRIVE] is set to [LINEAR]
Sets the rotational angle of the focus ring.
The items that can be set are as follows.
≥[90°], [120°], [150°], [180°], [210°], [240°], [270°], [300°], [330°], [360°]
(Factory setting: [180°])
[MACRO]
Enables/disables the focus macro function.
If functions are assigned to the USER buttons, [ON]/[OFF] can be switched using the USER button operations.
(Factory setting: [OFF])
[AUTO SLOW SHTR]
You can make images brighter by making the shutter speed slower in dark places. The slow shutter works when in the auto
shutter mode.
The items that can be set are as follows.
≥[ON], [OFF]
(Factory setting: [OFF])
[ON] Enables the i.ZOOM function.
[OFF] Disables the i.ZOOM function.
[NON-LINEAR] The focus value changes according to the rotational speed and rotational position of the focus ring.
[LINEAR] The focus value changes according to the rotational angle of the focus ring.
[SPEED] Adjusts the focus value according to the speed at which the focus ring is rotated.
[COARSE]
Adjusts the focus value according to the rotational position of the focus ring.
Since the operation of the focus ring results in a greater change in focus value, this setting is suitable for
making rough adjustments.
[FINE]
Adjusts the focus value according to the rotational position of the focus ring.
Since the operation of the focus ring results in a smaller change in focus value, this setting is suitable for
making fine adjustments.
[ON] Enables the focus macro function.
[OFF] Disables the focus macro function.
• In the following case, this cannot be set.
– When using the face detection/tracking AE&AF function
• The shutter speed changes to the following depending on the frame rate of [SYSTEM] menu ¨ [REC FORMAT] and the
ambient brightness.
Frame rate of [REC FORMAT] Shutter speed
59.94p/59.94i/29.97p 1/30 or more
50.00p/50.00i/25.00p 1/25 or more
23.98p 1/24 or more
• When the shutter speed becomes 1/30, 1/25 or 1/24, the screen may be seen as if frames are missed and afterimages may
appear.