Installation Guide

ManualsBrandsPanasonic ManualsBathWhisperCeiling DC Fan with Pick-A-Flow Speed Selector 110/130 or 150 CFM and Flex-Z-Fast Installation Bracket

Model No.

Contents

GENERAL SAFETY INFORMATION

DESCRIPTION

UNPACKING

SUPPLIED ACCESSORIES

DIMENSIONS

WIRING DIAGRAM

SELECTOR INDICATION (FV-0511VQC1 only)

OPERATION (FV-0511VQC1 only)

FEATURE

INSTALLATION (NEW CONSTRUCTION)

INSTALLATION (RETROFIT)

MAINTENANCE (CLEANING)

PRACTICAL GUIDE TO INSTALLATION

SPECIFICATIONS

PRODUCT SERVICE

--------------2~3

----------------------------------------4

-----------------------------------------4

--------------------------4

-----------------------------------------5

-----------------------------------6

----------6

------------------7

---------------------------------------------7

--------8~9

-----------------------10

------------------10~11

----

-------------11

-----------------------

BACK COVER

--------------------

BACK COVER

INSTALLATION INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Representative models:

FV-0511VQ1

FV-1115VQ1

Ventilating Fan

FV-0511VQC1

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before attempting to install, operate or service

the Panasonic product. Please carefully read the “GENERAL SAFETY INFORMATION”

Failure to comply with instructions could result in personal injury or property damage.

Please explain to users how to operate and maintain the product after installation,

and this booklet should be presented to users.

Please retain this booklet for future reference.

FV-0511VQ1

FV-1115VQ1

FV-0511VQC1

1 5 V Q 1 0 4 2 0 B

Summary of content (12 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Ventilating Fan Model No.
PAGE 2
GENERAL SAFETY INFORMATION For Your Safety To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
PAGE 3
GENERAL SAFETY INFORMATION CONTINUED WARNING These models are UL listed for tub and shower enclosures. Canada only: Not to be installed in a ceiling thermally insulated to a value greater than R40. Do not disassemble the unit for reconstruction. It may cause fire or electric shock. A statement to the effect that when the product is to no longer be used, it must not be left in place but remove, to prevent it from possibly failing.
PAGE 4
GENERAL SAFETY INFORMATION CONTINUED NOTICE Provide make up air for proper ventilation. Do not install the unit where ducts are configured as shown in below. Adaptor Excessive bending Successive bending Squeezed duct Bend close to duct adaptor When one switch is connected with two or more products in parallel, the unit may not function. Therefore, parallel connection should not be allowed. DESCRIPTION These products are listed by UL under UL file No. E78414.
PAGE 5
DIMENSIONS FV-0511VQ1 , FV-1115VQ1 7/8 (23.5) 3 3 3/8 (86) 13 (330) 5 7/8 (148) 3 7/8 (100) 5 7/8 (151) 12 (304) 10 1/4 (260) 4 3 3/8 (86) 6 13 1/4 ~ 15 1/2 (336~394) 16 1/2 ~ 18 3/4 (419~480) 21 1/4 ~ 23 1/2 (540~597) 5 1 Unit: inches (mm) 1 1/2 (37) 4 1/2 (114) 6 5/8 (169) FV-1115VQ1 2 9 8 7 1/2 (190) FV-1115VQ1 13 (330) 7 10 1/4 (261) 3 7/8 (100) No. 1 Blade 2 Grille 7 Fan body 3 8 Damper 4 Junction box Adaptor 9 Flex-Z Fast TM bracket 5 PCB box Part name No.
PAGE 6
WIRING DIAGRAM FV-0511VQ1 , FV-1115VQ1 Fan body Main control circuit Junction box White Black Neutral Live (Fan) Main control circuit DC Motor Green AC120V 60Hz (Power supply) (Ground wire) FV-0511VQC1 Fan body Main control circuit DC Motor Junction box White Black Main control circuit Neutral Live (Fan) AC120V 60Hz (Power supply) Humidity sensor Selector Motion sensor Humidity setting Green (Ground wire) Timer SELECTOR INDICATION (FV-0511VQC1 only) Timer preset selector Humidity prese
PAGE 7
OPERATION (FV-0511VQC1 only) Panasonic ventilating fan responds to: (1) Motion sensor detectible condition. (2) Humidity sensor detectible condition. sensor Human activity Fan activity Stop The distance that motion can be detected is limited to 10 feet (3m). The field of view of the sensor is 90°. Room temperature is 25°C (77°F). OUTSIDE 90° INSIDE Motion sensor detectible condition The delay time is determined by timer preset switch. The unit continues running for an adjustable duration of 0.
PAGE 8
INSTALLATION (NEW CONSTRUCTION) The fan position between joists from 16" to 24" on center can be adjusted flexibly. CAUTION Adaptor Machine screw (M4X8) Please wear gloves during the installation work as follow. 1. Disconnect plug connector from receptacle (Fig.6) and remove adaptor from fan body by removing the machine screw (M4X8) before installation. (Fig.1) IMPORTANT: Remove the tape from damper and adaptor before installation. As shown below: Adaptor Fan body Fig.
PAGE 9
INSTALLATION (NEW CONSTRUCTION) CONTINUED 8. Insert fan body and slide into adapter assy with some strength, until the flange overlaps the Flex-Z Fast TM bracket. Secure the fan body to Flex-Z Fast TM bracket by using 2 self-drilling screws, plug connector to receptacle and secure the fan body to adaptor by using machine screw (M4X8). (Fig.6) CAUTION Secure machine screw (M4X8) to the suitable hole and not touch the Flex-Z Fast TM bracket. Please fix the screw carefully to avoid screw slip teeth.
PAGE 10
INSTALLATION (RETROFIT) WARNING 4. Secure the fan body to Flex-Z Fast TM bracket by using 2 self-drilling screws, plug connector to receptacle and secure the fan body to adaptor by using machine screw (M4X8). (Fig.12) CAUTION Secure machine screw (M4X8) to the suitable hole and not touch the Flex-Z Fast TM bracket. Please fix the screw carefully to avoid screw slip teeth. 5. Follow the step 10 to 13 on INSTALLATION (NEW CONSTRUCTION). 4Tapping screws(ST4.
PAGE 11
MAINTENANCE (CLEANING) CONTINUED 1. Remove grille by pulling down one mounting spring (Fig.13), then pull down the other. (Pull down the mounting spring that without lead wire passed side, and remove motion sensor as shown in Fig.14) (Squeeze mounting spring and pull down carefully) Mounting spring Grille Gloves Slot Fig.13 2. Clean grille. (Don’t put into hot water. Use non-abrasive kitchen detergent, wipe dry with clean cloth) (Fig.15) Clasp Ceiling 3. The grille should be dry after cleaning.
PAGE 12
SPECIFICATIONS Model No. Duct Voltage Frequency Air diameter (V) (Hz) direction (inches) FV-0511VQ1 Exhaust 120 60 4 or 6 FV-1115VQ1 Exhaust 120 60 6 FV-0511VQC1 Exhaust 120 60 4 or 6 Air volume at 0.1"WG (CFM) Noise (sones) Speed (rpm) Power (W) 50 80 110 110 130 150 50 80 110 <0.3 <0.3 <0.3 <0.3 <0.3 <0.3 <0.3 <0.3 <0.3 756 821 957 636 671 698 756 821 957 4.1 6.0 10.8 6.9 9.1 11.9 4.1 6.0 10.8 Weight Ib.(kg) 9.3(4.2) 9.5(4.3) 9.5(4.