Cordless Impact Driver Operating Instructions Model No: EY6506 IMPORTANT This manual contains safety information. Read manual completely before first using this product and save this manual for future use.
. GENERAL SAFETY RULES - FOR ALL BATTERY OPERATED TOOLS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
Such preventive safety measures reduce the risk of starting the tool accidentally. 16) Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 17) When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns or a fire.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: Lead from lead-based paints Crystalline silica from bricks and cement and other masonry products Arsenic and chromium from chemically-treated lumber.
or ABOVE 40°C (104°F). This is very important in order to maintain optimal condition of the battery pack. 17) Do not incinerate the battery pack. It can explode in a fire. 18) Avoid dangerous environment. Do not use charger in damp or wet locations. 19) The charger is designed to operate on standard household electrical power only. Do not attempt to use it on any other voltage! 20) Do not abuse cord. Never carry charger by cord or yank it to disconnect from outlet.
.ASSEMBLY ASSEMBLY Attaching or removing bit NOTE: When attaching or removing a bit, disconnect battery pack from tool or place the switch in the center position (switch lock). 1. Hold the collar of quick connect chuck and pull it against the driver. 2. Insert the bit into the chuck. 3. The bit holder will return to its original position when it is released. 4. Pull the bit to make sure it does not come out. 5. To remove the bit, pull back on the bit holder in the same way.
When operating with a Ni-MH battery pack, make sure the place is wellventilated. Battery Pack Life The rechargeable batteries have a limited life. If the operation time becomes extremely short after recharging, replace the battery pack with a new one. Charging NOTE: When you charge the battery pack for the first time, or after prolonged storage, charge it for about 24 hours to bring the battery up to full capacity. Battery charger (EY0110) 1. Plug the charger into the AC outlet.
.LAMP INDICATIONS Charger is plugged into the AC outlet. Ready to charge. Red Flashing Now charging Red Lit Charging is completed. Battery pack is warm. Charging will begin when temperature of battery pack drops. Charging is not possible. Clogged with dust or malfunction of the battery pack. Green Flashing quickly Orange Lit Orange Flashing . MAINTENANCE Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.
Bolt Tightening Conditions M6, M8, M10, M12 x 25 mm (1") Standard bolt M10 x 25 mm High tensile bolt (Bolt size : Millimeters) k f-cm (in-lbs) Tightening torque 900 (782) 800 (695) 700 (608) 600 (521) 500 (434) 400 (347) 300 (260) 200 (174) 100 (87) 0 M10 x 25 High tensile bolt ! ' #+
. ACCESSORIES Use only bits suitable for size of drill. MAXIMUM RECOMMENDED CAPACITIES Model Screw Wood screw driving Self-drilling screw Bolt fastening EY6506 ø 5.8 mm (7/32") ± 75 mm (3") Yellow pine ø 4.0 mm (5/32") ± 13 mm (1/2") SPC t = 1.6 mm (1/16") Standard bolt : M12 High tensile bolt : M10 . SPECIFICATIONS MAIN UNIT Model Motor No load speed Maximum torque Impact per minute Overall length Weight (with battery pack) EY6506 DC Motor 12 V 0 ~ 2800 /min (rpm) 98.
BATTERY CHARGER Model Electrical rating Weight 1.2Ah 7.2V EY9065 EY9066 2.0Ah 3.0Ah 3.5Ah 24V 20min. EY9180 EY9182 1.7Ah Charging time EY0110 See the rating plate on the bottom of the charger. 0.78 k , (1.72 lbs.) 9.6 V 12V 15.6V 18V EY9080 EY9001 EY9086 EY9006 EY9101 25min. EY9168 EY9106 30min. EY9136 EY9117 30min. EY9200 60min. EY9230 EY9210 45min. EY9201 EY9231 55min. 90min. EY9251 65min. NOTE: This chart may include models that are not available in your area.
30-DAY QUALITY SATISFACTION GUARANTEE: If you are dissatisfied with any Panasonic Cordless Power Tool for any reason, simply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts and instructions, within 30 days of the date of purchase, for a full refund, or call Panasonic at 201-392-6655. Abuse or misapplication of any power tool voids the guarantee.
