Datasheet

ManualsBrandsPanasonic ManualsSwitchesTactile Switch EVQP2, SPST, 2.5N, 4.7 x 3.5mm

Light Touch Switches/EVQP2/P9/3P2

1 2 3 4 5 6 7 8 9

Product Code TypeOperating Force Product Height and Push Plate Color

4.7 mm×3.5 mm SMD Light Touch Switches

Type:

EVQP2/EVQP9/EVQ3P2

■ Speciﬁcations

■ Features

● External dimensions : 4.7 mm

3.5 mm,

Height : Middle Push Travel 2.5 mm

ShortPushTravel2.1mm,2.5mm

● High operating force and long operational life

● High mountability with J-bent (4 terminals)

■ Recommended Applications

● Operation switches for portable electronic equipment

(Mobile phones, Digital still cameras, Camcorders,

Portable audio players, etc.)

●

Keylessentrysystems(automotive)

● Car audio equipment

■ Explanation of Part Numbers

Travel Type Middle Push Travel Short Push Travel

Type Snap action / Push-on V DC type SPST

Electrical

Rating 10 μA 2 V DC to 20 mA 15 V DC (Resistive load)

Contact Resistance 100 mΩ max.

Insulation Resistance 100 MΩ min. (at 100 V DC)

Dielectric Withstanding Voltage

250 V AC (1 minute)

Bouncing 10 ms max. (ON, OFF)

Mechanical

Operating Force 2.5 N, 3.5 N, 5.0 N

1.0 N, 1.6 N, 2.4 N, 3.5 N, 4.0 N, 5.0 N

Travel 0.70 mm±0.20 mm 0.25 mm

+0.05

Endurance Operating Life

2.5 N:1,000,000 cycles min.

3.5 N: 500,000 cycles min.

5.0 N: 200,000 cycles min.

1.0 N, 1.6 N: 1,000,000 cycles min.

2.4 N: 500,000 cycles min.

3.5 N: 200,000 cycles min.

4.0 N: 200,000 cycles min.

5.0 N: 200,000 cycles min.

Operating Temperature –40 °C to +85 °C

Storage Temperature

–40 °C to +85 °C (Bulk)

–20 °C to +60 °C (Taping)

Minimum Quantity/Packing Unit 4,000 pcs. Embossed Taping (Reel Pack)

Quantity/Carton 20,000 pcs.

–0.15

Designandspeciﬁcationsareeachsubjecttochangewithoutnotice.Askfactoryforthecurrenttechnicalspeciﬁcationsbeforepurchaseand/oruse.

Shouldasafetyconcernariseregardingthisproduct,pleasebesuretocontactusimmediately.

ANCTB19E 201701-Fd

Panasonic Corporation 2017

–1–

industrial.panasonic.com/ac/e/

2017.01

ANCTB19E.indd1 17/01/139:07

Summary of content (6 pages)

PAGE 1
Light Touch Switches/EVQP2/P9/3P2 4.7 mm×3.5 mm SMD Light Touch Switches Type: EVQP2/EVQP9/EVQ3P2 ■ Features ● External dimensions : 4.7 mm×3.5 mm, Height : Middle Push Travel 2.5 mm Short Push Travel 2.1 mm, 2.5 mm ● High operating force and long operational life ● High mountability with J-bent (4 terminals) ■ Recommended Applications ● Operation switches for portable electronic equipment (Mobile phones, Digital still cameras, Camcorders, Portable audio players, etc.
PAGE 2
Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 1 EVQP2 EVQ3P2 Middle push travel With J-bent terminals Without Ground Terminal (General dimension tolerance±0.2) 2.5 +0.2 –0.1 0.6 +0 5.5 –0.3 4.7±0.1 φ1 .8 1.65±0.1 3.5±0.1 Circuit diagram 1.7±0.1 6.6±0.1 3.7±0.1 0.6±0.1 0.7±0.1 2.7±0.1 PWB land pattern for reference Part Numbers Ground Terminal Operating Force Height Push Plate Color Operating Life EVQP2H02B Without 2.5 N 2.
PAGE 3
Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 2 EVQP2 EVQ3P2 (General dimension tolerance : ± 0.2) 0.55 Middle push travel With J-bent terminals With Ground Terminal Ground terminal 2.5 +0.2 –0.1 0.6 +0 4.7±0.1 5.5 –0.3 φ1 .8 1.65±0.1 Circuit diagram 1.4±0.1 3.5±0.1 1.7±0.1 0.6±0.1 3.7±0.1 1 6.6±0.1 1.7±0.1 2.35±0.1 GND 0.3 0.7±0.1 2.7±0.1 Land pattern plan We recommend to connect the GND land shown in the switch spec. with the GND of your P.C.
PAGE 4
Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 3 EVQP2 EVQP9 (General dimension tolerance±0.2) 1.6 Short push travel With J-bent terminals Without Ground Terminal H 0.6 +0 5.5 –0.3 2.6 4.7±0.1 φ2 Circuit diagram 1.65±0.1 3.5±0.1 1.7±0.1 6.6±0.1 3.7±0.1 0.6±0.1 0.7±0.1 2.7±0.1 PWB land pattern for reference Part Numbers Ground Terminal Operating Force H=Height Push Plate Color Operating Life EVQP2002M Without 1.0 N 2.
PAGE 5
Light Touch Switches/EVQP2/P9/3P2 ■ Dimensions in mm (not to scale) No. 4 Short push travel With J-bent terminals With Ground Terminal (General dimension tolerance±0.2) 1.6 0.55 EVQP2 EVQP9 Ground terminal H 0.6 +0 5.5 –0.3 2.6 4.7±0.1 φ2 Circuit diagram 1.4±0.1 1.65±0.1 3.5±0.1 1.7±0.1 0.6±0.1 3.7±0.1 1 6.6±0.1 1.7±0.1 2.35±0.1 GND 0.3 0.7±0.1 2.7±0.1 Land pattern plan We recommend to connect the GND land shown in the switch spec. with the GND of your P.C.
PAGE 6
Light Touch Switches/EVQP2/P9/3P2 ■ Recommended Reﬂow Soldering Conditions Fan or Normal Temp. Tape width=12.0 mm 230 180 t1 Feeding hole φD0 Chip pocket P2 P0 E 150 F W A B Operation Top (°C) MAX. 260 ● Embossed Carrier Taping (Normal Temp.) t2 90±30 P1 Chip component Tape running direction 40±10 Taping condition : Lack of products in the middle of taping should be one MAX, but total quantity speciﬁed in the speciﬁcations should be secured.