Data Sheet

ManualsBrandsPanasonic ManualsPassive ComponentsSMD varistor ERZV10D911 910 V Panasonic ERZV10D911 1 pc(s) Tape cut

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

“ZNR” Transient/Surge Absorbers (Type D)

4 5678910

Product Code

11 12

Design No.

Series

Element Size

10 mm

14 mm

20 mm

5 mm

7 mm

The ﬁrst two digits are signiﬁcant

ﬁgures and the third one denotes

the number of zeros following.

Norminal Varistor Voltage

10 mm

Lead Conﬁguration

Crimped Lead

✽

Straight Lead

✽ Excluding f20.

✽ Only the lead cut

4 5678910

Product Code

11 12

Design No.

Series

Element Size

10 mm

14 mm

5 mm

7 mm

The ﬁrst two digits are signiﬁcant

ﬁgures and the third one denotes

the number of zeros following.

Nominal Varistor Voltage

10 mm

Lead Conﬁguration

Crimped Lead

Straight Lead

Taping / Packaging

A to D

E to H

Radial Taping (P

0=12.7 mm)

Radial Taping (P

0=15.0 mm)

“ZNR” Transient/Surge Absorbers

Type: D

Series: V

Explanation of Part Numbers (Bulk)

Explanation of Part Numbers (Taping)

Features

Recommended Applications

Applicable Standards

●

Large withstanding surge current capability in compact sizes

●

Large “Energy Handling Capability” absorbing transient overvoltages in compact sizes

●

Wide range of varistor voltages

●

RoHS compliant

●

Transistor, diode, IC, thyristor or triac semiconductor protection

●

Surge protection in consumer electronic equipment

●

Surge protection in communication, measuring or controller electronics

●

Surge protection in electronic home appliances, gas or petroleum appliances

●

UL1449 (VZCA2/UL, VZCA8/C-UL)

●

VDE IEC61051-1, -2, -2-2, IEC60950-1 Annex.Q

●

CSA C22.2 No.1

●

CQC(GB/T10193, GB/T10194, GB4943.1, GB8898)

Refer to page 5 to 8, and 27, for the details

■

As for Handling Precautions and Minimum Quantity / Packing Unit

Please see Related Information

Jan. 201503

Summary of content (24 pages)

PAGE 1
“ZNR” Transient/Surge Absorbers (Type D) “ZNR” Transient/Surge Absorbers Type: Series: D V Features ● Large withstanding surge current capability in compact sizes “Energy Handling Capability” absorbing transient overvoltages in compact sizes ● Wide range of varistor voltages ● RoHS compliant ● Large Recommended Applications ● Transistor, diode, IC, thyristor or triac semiconductor protection protection in consumer electronic equipment ● Surge protection in communication, measuring or controller electro
PAGE 2
“ZNR” Transient/Surge Absorbers (Type D) Reference Guide to Standard Products Part No. Applicable Standards Varistor ✽ Voltage Type Name Approvals (V) Maximum Clamping Allowable Voltage Voltage at 8/20µs ACrms (V) DC (V) max.(V) Ip (A) Maximum Peak Current at 8/20µs(A) 1 time 2 times ERZV05D180 V180 ◇ 40 1 250 125 ERZV07D180 V7180 ◇ 36 2.
PAGE 3
“ZNR” Transient/Surge Absorbers (Type D) Reference Guide to Standard Products Part No. Applicable Standards Type Name Approvals Varistor ✽ Voltage (V) Maximum Clamping Maximum Allowable Voltage Peak Current Voltage at 8/20µs at 8/20µs(A) ACrms (V) DC (V) max.
PAGE 4
“ZNR” Transient/Surge Absorbers (Type D) Reference Guide to Standard Products Part No. Applicable Standards Type Name Approvals ERZV05D331 V331U ○☆□◇ ERZV07D331 V7331U ○☆□◇ ERZV09D331 V9331U ○☆□◇ ERZV10D331 V10331U ○☆□◇ ERZV14D331 V14331U ERZV20D331 V20331U Varistor ✽ Voltage (V) Maximum Clamping Maximum Allowable Voltage Peak Current Voltage at 8/20µs at 8/20µs(A) ACrms (V) DC (V) max.
PAGE 5
“ZNR” Transient/Surge Absorbers (Type D) Reference Guide to Standard Products Part No.
PAGE 6
“ZNR” Transient/Surge Absorbers (Type D) 5 Series Ratings and Characteristics Operating Temperature Range : –40 to 85 °C Part No. Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.) ✽✽ Ip Rated Power Maximum Peak Current Capacitance (8/20 µs) (max.) (10/1000 µs) (2 ms) 1 time 2 times Maximum Energy V0.
PAGE 7
“ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV05D180 to ERZV05D680 ERZV05D180 to ERZV05D680 1000 Max. Clamping Voltage Max.
PAGE 8
“ZNR” Transient/Surge Absorbers (Type D) 7 Series Ratings and Characteristics Operating Temperature Range : –40 to 85 °C V1 mA (V) ACrms (V) 18(16 to 20) 11 22(20 to 24) 14 27(24 to 30) 17 33(30 to 36) 20 39(35 to 43) 25 47(42 to 52) 30 56(50 to 62) 35 68(61 to 75) 40 82(74 to 90) 50 100(90 to 110) 60 120(108 to 132) 75 150(135 to 165) 95 200(185 to 225) 130 220(198 to 242) 140 240(216 to 264) 150 270(247 to 303) 175 330(297 to 363) 210 360(324 to 396) 230 390(351 to 429) 250 430(387 to 473) 275 470(423 to
PAGE 9
“ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV07D180 to ERZV07D680 ERZV07D180 to ERZV07D680 1000 Max. Clamping Voltage Max. Leakage Current 400 100 e s m e Ti im 1 es T m Ti 10 2 10 10 3 10 4 Tim Tim es e 10 5 s T 10 10 6 ime Tim s es Impulse Current (A) 30 0 56 0 47 0 39 330 20 270 40 es 0 68 2 m Ti Voltage (V) 200 100 90 80 70 60 50 2 times : 5 min.
PAGE 10
“ZNR” Transient/Surge Absorbers (Type D) 9 Series Ratings and Characteristics ● Operating Temperature Range : –40 to 85 °C Part No.
PAGE 11
“ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV09D180 to ERZV09D680 ERZV09D180 to ERZV09D680 Max. Clamping Voltage Max. Leakage Current 400 1000 680 560 470 390 330 270 300 200 2 times : 5 min. interval up to 10 times : 2 min. interval up to 106 times : 10 sec.
PAGE 12
“ZNR” Transient/Surge Absorbers (Type D) 10 Series Ratings and Characteristics ● Operating Temperature Range : –40 to 85 °C Varistor Voltage Part No. V1 mA (V) Maximum Allowable Voltage ACrms (V) DC (V) ERZV10D180 18(16 to 20) 11 ERZV10D220 22(20 to 24) ERZV10D270 27(24 to 30) ERZV10D330 ERZV10D390 ERZV10D470 47(42 to 52) 30 ERZV10D560 56(50 to 62) 35 ERZV10D680 68(61 to 75) 40 56 ● Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.
PAGE 13
“ZNR” Transient/Surge Absorbers (Type D) ✽ Refer to page 24 to 26 about leads cut type and taping. L±1.0 D T L L 1.3 1.4 1.5 1.7 1.6 1.7 1.8 2.0 W 1.6 1.8 f 0.8 2.0 2.3 1.9 2.0 2.1 2.3 (ERZV10D182CS) 2.6 2.8 D 2.9 3.1 3.3 3.5 3.8 4.2 4.5 f 0.8 4.9 5.2 5.7 6.2 6.8 10.0(±1.5) W T L 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 16.5 2 H max. 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.
PAGE 14
“ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV10D820 to ERZV10D511 ERZV10D820 to ERZV10D511 10000 Voltage (V) 30 10-6 10 6 Surge Current (A) 10 es 271 241 1 20 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec.
PAGE 15
“ZNR” Transient/Surge Absorbers (Type D) 14 Series Ratings and Characteristics ● Operating Temperature Range : –40 to 85 °C Maximum Allowable Voltage Part No. Varistor Voltage ERZV14D180 18(16 to 20) 11 V1 mA (V) ACrms (V) DC (V) ● Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.) ✽ Ip Rated Power (V) (W) Maximum Peak Current Capacitance (8/20 µs) (max.) (10/1000 µs) (2 ms) 1 time 2 times Maximum Energy (J) 14 36 0.1 5.2 (J) (A) (A) at 1 kHz (pF) 4.
PAGE 16
“ZNR” Transient/Surge Absorbers (Type D) ✽ Refer to page 24 to 26 about leads cut type and taping. L±1.0 1.3 D 1.4 1.5 1.7 1.6 1.7 1.8 2.0 1.6 W 1.8 2.0 f 0.8 2.3 1.9 2.0 2.1 2.3 2.6 2.8 (ERZV14D182CS) 2.9 D 3.1 3.3 3.5 3.8 4.2 4.5 f 0.8 4.9 5.2 5.7 6.2 6.8 10.5(±2.0) T L L 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 20.5 W T L H max. 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.
PAGE 17
“ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV14D820 to ERZV14D511 ERZV14D820 to ERZV14D511 10000 101 820 511 10 10 2 Tim e Tim s es 10 300 100 90 80 70 60 50 40 30 10-6 271 241 1 20 10000 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec.
PAGE 18
“ZNR” Transient/Surge Absorbers (Type D) 20 Series Ratings and Characteristics ● Operating Temperature Range : –40 to 85 °C Maximum Allowable Voltage Part No. Varistor Voltage ERZV20D180 18(16 to 20) 11 ERZV20D220 22(20 to 24) ERZV20D270 27(24 to 30) ERZV20D330 33(30 to 36) ERZV20D390 39(35 to 43) 25 ERZV20D470 47(42 to 52) 30 ERZV20D560 56(50 to 62) 35 ERZV20D680 68(61 to 75) 40 V1 mA (V) ACrms (V) DC (V) ● Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.
PAGE 19
“ZNR” Transient/Surge Absorbers (Type D) ✽ Refer to page 24 to 26 about leads cut type and taping. 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 28.0 L±1.0 D 1.5 1.6 1.7 1.9 1.9 2.0 2.1 2.2 W 1.8 2.0 f 1.0 2.2 2.5 2.1 2.2 2.3 (ERZV20D182) 2.5 2.8 D 3.0 3.1 3.3 3.5 3.7 4.2 4.4 4.7 5.1 5.4 f 1.0 5.9 6.4 7.0 10.7(±2.0) T L L H max. 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.
PAGE 20
“ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV20D820 to ERZV20D511 ERZV20D820 to ERZV20D511 10000 151 Voltage (V) 100 90 80 70 60 50 271 1 20 201 151 121 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec.
PAGE 21
“ZNR” Transient/Surge Absorbers (Type D) Straight Leads Cut Type (Bulk Type) Ratings and Characteristics ✽ Refer to bulk standard type part no. (P9 to P23). Dimensions in mm (not to scale) T✽✽ fd B H D L✽ W ✽ Dimension “L”: Conforms to each individtual specification. ✽✽ Dimension “T”: Conforms to each individual specification. notes Unit : mm Series Symbol Varistor Voltage D H W fd B Standard Products Part No.
PAGE 22
“ZNR” Transient/Surge Absorbers (Type D) Taping Specifications for Automated Assembly (Straight Leads and Taping) Ratings and Characteristics ✽ Refer to bulk standard type part no. (P9 to P23). Taping Dimensions in mm (not to scale) P2 △h fD P T✽ A Type I·II F1 H0 H W W1 L W0 W2 P1 F Position of H0 dimension fd f D0 t P0 Position of F1 dimension ✽ Dimension “T”: Conforms to each individual specification.
PAGE 23
“ZNR” Transient/Surge Absorbers (Type D) Taping Specifications for Automated Assembly (Crimped Leads and Taping) Ratings and Characteristics ✽ Refer to bulk standard type part no. (P9 to P23). Taping Dimensions in mm (not to scale) P2 △h fD P T✽ H W W1 L W0 P1 H0 W2 A Type I F fd f D0 t P0 ✽ Dimension “T”: Conforms to each individual specification. △h fD P2 Type II T✽ H W W1 L W0 P1 H0 W2 A P F fd t f D0 P0 ✽ Dimension “T”: Conforms to each individual specification.
PAGE 24
“ZNR” Transient/Surge Absorbers (Type D) Application Note for Safety Standards ● Approvals products lists in "Reference Guide to Standard Products." VDE and CSA : Registered in "Type name", it isn’t registered in "Panasonic Part No." ● CQC : Registered in "Panasonic Part No." ● "Rated Voltages" are specified for UL recognized components in list shown below.