Operating Instructions

9
• The battery used is a lithium‑ion, so charging after every use will
have no effect on battery life.
Charging without the charging stand
1. Press the power switch to turn off the power, and
insert the appliance plug into the clipper.
2. Plug in the adaptor into a household outlet.
AC operation
If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it.
• If the remaining battery is too low, the blades may move slowly
or stop, even with the AC operation. In this case, charge the
battery for 1 minute or more.
• The battery will be discharged, even with the AC operation.
Using the clipper
• Make sure that the clipper is turned off.
• The appliance may not operate in an ambient temperature lower
than approximately 5 °C.
1
1
Set the trimming height.
2
2
Press the power switch to turn on the power.
Setting the trimming height
For a trimming height of 0.8 mm to
2.0 mm, turn the dial to the desired
height.
Use an attachment for a trimming
height higher than 3 mm or more.
Trimming
height
indicator
0.8
1.1
1.4
1.7
2.0