User guide

70
Settings/Convenient information
When a problem occurs
Start
When the following problem occurs Confirm the following
The software does not start. z Ensure that the user has administrative rights.
z More than one user cannot start the software at the same time on a PC. Confirm
whether another user has started HD Writer.
z It takes time for the software to start, or the software may not start, if there are any
damaged or corrupted images.
The screen saver or the power-saving
functions do not operate.
z While HD Writer is started, the screen saver or the power-saving functions (function to
make the PC enter the standby or sleep modes after a certain time has elapsed without
any operation on the PC) are disabled. (Since HD Writer may not operate properly, the
screen saver and the power-saving functions must be disabled before starting HD
Writer.)
When the following problem occurs Confirm the following
SD card is not displayed on the Copy
window.
z If you insert the SD card into the high definition video camera and then connect it to the
PC, it will not be displayed if the high definition video camera has not been set for
connection with the PC. (For details, refer to the operating instructions for the high
definition video camera.)
z The SD card will not be automatically detected if it is inserted after the software has
been started up. Click [Refresh] button to display it.
z An SDHC memory card (4 GB) will not be displayed unless using a reader/writer that
supports SDHC.
Copy
ENG-HDW1.0.book 70 ページ ２００６年１１月２１日 火曜日 午前１０時５１分