User manual

9
RQT6263
Getting
started
Basic
operations
POWER / I
PROGRESSIVE
OUT
AUDIO
ONLY
DISC
EXCHANGE
DISC
SKIP
OPEN/
CLOSE
∫
;
DISC SKIP
3
52
≥
4
[1]
≥
1
Basic play
\RAM\ \DVD-A\ \DVD-V\ [VCD\ [CD] [WMA] [MP3]
1 Press [POWER Í] to turn on the unit.
For progressive output
Press [PROGRESSIVE OUT] so the indicator lights.
2 Press [<] to open the drawer.
3 Place the disc(s) on the disc tray(s).
You can load discs on the other trays by
pressing [DISC SKIP] on the main unit.
≥Remove TYPE 2 and 4 discs from
their cartridges before use. \RAM\
≥The label of the disc must face
upward. (With double-sided discs,
load so the label for the side you
want to play is facing up.)
4 Press [<] to close the drawer.
The disc indicator will go out when the unit reads a tray as empty.
≥If a menu screen is shown, see page 10.
≥[WMA] [MP3]
Group and track names are displayed on the television.
Press [SUBTITLE] to turn the display on or off.
5 Press [1] (PLAY).
Play begins.
When the disc finishes playing
If Sequential Mode (➡ page 10) is off, select the disc using the disc
type information screen (➡ page 10).
To stop play
Press [∫] (➡ page 11, Resume function).
To pause play
Press [;].
Press [1] (PLAY) to restart play.
To prevent damage
Do not; ≥load more than one disc per tray.
≥touch the drawer or the carousel while they are in motion
≥rotate the carousel by hand.
≥close the drawer by hand.
\Note\
≥If “/” appears on the television
The operation is prohibited by the unit or disc.
≥Discs continue to rotate while menus are displayed even after playing an
item. Press [∫] when you finish to preserve the unit’s motor and your
television screen.
≥Volume may be lower when playing DVDs than when playing other discs
or during television broadcasts. Reduce the volume before playing other
sources so that a sudden increase in output does not occur.
≥Progressive output is not possible if the “Progressive Out” setting is left
as “Disable” in the QUICK SETUP menus.
≥Although the progressive out indicator lights if you press
[PROGRESSIVE OUT] after changing the “Progressive Out” setting to
“Enable”, output will still only be interlace if you have connected the unit
to your television through the VIDEO OUT or S VIDEO OUT terminals.
≥When progressive output is on, closed captions will not be displayed.
Quick setup
The QUICK SETUP screen appears when you press [SETUP] the first
time after purchase and assists you to make necessary settings. You can
access this screen again later if you need to ( ➡ page 21, Others—QUICK
SETUP).
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
\1\ Press [POWER Í] to turn on the unit.
\2\ Press [SETUP] to show
the QUICK SETUP
screen.
\3\ Press [3, 4] to select the menu language and
press [ENTER].
\4\ Press [3, 4] to select “Yes” to continue and
press [ENTER].
\5\ Press [3, 4] to select the item and press
[ENTER].
≥Audio Language (➡ page 21)
≥Subtitle Language (➡ page 21)
≥TV Aspect (➡ below)
≥Progressive Out (➡ page 21)
≥Speaker Setting (➡ page 21)
\6\ Press [ENTER] and then [SETUP] to end the
settings.
To return to the previous screen
Press [RETURN].
∫ TV Aspect
Select “4:3” (regular) or “16:9” (widescreen) to suit your television.
If you have a regular 4:3 television, you can also select how video on some
discs is shown (➡ page 21, Video—TV Aspect).
≥4:3 Pan&Scan (Factory preset)
Widescreen software is expanded to fill the
screen of a 4:3 aspect television (unless
prohibited by the producer of the disc).
≥4:3 Letterbox
Widescreen software is shown in the letterbox
style on a 4:3 aspect television.
∫ Viewing 4:3 aspect pictures on a 16:9 widescreen
television using progressive output
16:9 aspect pictures are shown correctly, but 4:3 aspect pictures are
stretched horizontally to fill the screen.
≥If your television can change the aspect when input is progressive
Use the television to change the aspect to the correct one.
≥If your television cannot change the aspect when input is progressive
Press [PROGRESSIVE OUT] so the indicator goes out. Output will now
be interlace and 4:3 aspect picture is shown in the middle of the screen.
PROGRESSIVE OUT button/indicator
[6][5]
;
SLEEP
SLOW/SEARCH
SKIP
STOP PLAY
MENUTOPMENU
ENTER
DISPLAY
SUBTITLE
DISC DISC1 DISC2 DISC3
AUDIO ANGLE
QUICK REPLAY
RETURN
SETUP
123
OPEN/CLOSE
PLAYLIST
DIRECT
NAVIGATOR
PAUSE
POWER
[1]
∫
≥
1
2
≥
4
5
≥
[4]
[3]
≥
≥
[6][2]
≥
SUBTITLE
RETURN
SELECT
SETUP