Operating Instructions

6
RQT8847
STEP 1 Connection to a television
≥ Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥ Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥ Turn off all equipment before connection and read the appropriate operating instructions.
≥ Connect the terminals of the same colour.
Please connect
directly to TV
R
L
P R
P B
R
L
Y
P
R
P
B
Y
Pl
ease connec
t
directly to T
V
AV
SCART (AV) IN
AUDIO IN
R L
COMPONENT
VIDEO IN
AUDIO IN
R L
VIDEO
IN
Audio/video
cable
With VIDEO IN
21-pin SCART
cable
≥ If the television is compatible with S-video,
select “S-Video/YPbPr”, or compatible with
RGB, select “RGB/No Output” for the AV
terminals in QUICK SETUP (➜ page 7).
With COMPONENT VIDEO IN
Video cables
You can connect the audio cable to the 2-
channel audio input terminals of an analog
amplifier or system component to enjoy
stereo sound.
Audio/video
cable
Not used
Television
To enjoy progressive video
Connect to a progressive output compatible television.
1 Select “Video/YPbPr” for the component terminals in
QUICK SETUP (➜ page 7).
2 Set “Video Output Mode” to “±±±p”, then follow the
instructions on the menu screen (➜ page 17, Picture
Menu).
Panasonic televisions with 625 (576)/50i · 50p, 525
(480)/60i . 60p input terminals are progressive
compatible.
Back of the unit
With SCART (AV) IN
Connection to a television
RQT8847-B_0720.fm Page 6 Thursday, July 20, 2006 2:38 PM