(For Copy & Function Parameters) Getting To Know Your Machine Operating Instructions Digital Imaging Systems DP-8060 / 8045 / 8035 Others Function Parameters Making Copies Model No. Before operating this machine, please carefully read this manual, and keep this documentation in a safe place for future reference. (Illustration shows optional accessories that may not be installed on your machine.
Getting To Know Your Machine Operating Instructions The following Operating Instruction manuals are included with this machine. Please refer to the appropriate manual and keep all manuals in a safe place for future reference. If you lose a manual, contact an authorized Panasonic dealer. Operating Instructions (For Setting Up) This manual contains essential information for setting up the machine.
Getting To Know Your Machine Symbols/Icons The following Symbols/Icons are used throughout this operating instructions manual. Place original(s) on the ADF Getting to know your machine Place original(s) on the Platen (Book) When making copies Place original(s) on the Platen (Sheet) Press any Hard Key on the control panel, or touch any Button on the touch panel display Press Hard Key When setting the machine's function parameters Touch any Button Others (Index) Input numbers ● Number of Copies, etc.
Operating Instructions Symbols/Icons 3 2 Getting To Know Your Machine Table of Contents Getting To Know Your Machine ■ Operating Instructions ...................................................................................... 2 ■ Symbols/Icons .................................................................................................. 3 Making Copies Basic Menu .......................................................................................................................................
Getting To Know Your Machine Other Features ............................................................................................................................... 58 ■ Job Memory .................................................................................................... 58 ■ Double Exposure ............................................................................................ 60 ■ Skyshot Mode ..........................................................................................
Making Copies Making Copies Basic Menu ■ Copying the Same Size Originals (1:1) Copy size is automatically selected. 1 2 or 100% If set to other function mode If original size is not detected ■ Selecting the type of Original(s) Ex: Copying on Heavy Paper (Post Cards, etc.) (133 g/m2 max.) 1 2 Touch the PAPER TRAY button. 3 Select Sheet Bypass and touch the SIZE CHANGE button. Load paper on the Sheet Bypass.
3 4 Adjust the Contrast (7 levels) or Select type of Original(s) Mainly Text Mainly Photo 4 Select HEAVY PAPER. Making Copies Text and Photo combined Number of Copies (Max.
Making Copies Basic Menu ■ Copying with Preset Ratios (Reduction/Enlargement) 1 2 A4 A3 or A3 If original size is not detected correctly A4 ■ Proof Copying Allows you to make one proof set, before proceeding to copy a large multi-set with various settings. Ex: 100 copies 1 2 100 1 or 2 Proof copy Multi copy NOTE 8 ● If the desired copy size is different from the paper size loaded in the Paper Tray, use Sheet Bypass.
3 The Correct ratio is automatically selected. 4 Reduction and enlargement ratios (%) A3 B4 A4R A5R A3 100 115 141 200 COPY SIZE B4 A4R 87 71 100 82 122 100 173 141 A5R 50 58 71 100 Making Copies ORIGINAL SIZE Number of Copies (Max. 999) 3 4 5 If the Proof Copy is OK, the remaining number of sets will be printed. Select Copy Job settings or Number of Copies (Max.
Making Copies Basic Menu ■ Tandem/Remote Copying When using the Tandem/Remote Copy function, requires network setup (see pages 77-78), and Parameter registration (see pages 12-15). The selected Remote printing copier must be either DP-8060/8045/8035. For the copier to function as a Remote/Tandem Copier it has to be setup in advance.
3 4 5 Making Copies Number of Copies (Max. 999) 7 6 For Tandem For Remote Select a Tandem or Remote Copy function Tandem Copying: Half of the copy job is printed out by the remote machine. Remote Copying: All of the copy job is printed out by the remote machine.
Making Copies Basic Menu ■ Parameter Registration (Tandem User Parameter) To register the Tandem parameters for the device (original), follow the steps in this paragraph. Requires network setup (see pages 77-78), and Parameter registration (see pages 12-15). The selected Remote printing copier must be either DP-8060/8045/8035. For the copier to function as a Remote/Tandem Copier it has to be setup in advance.
2 3 5 Making Copies 4 6 Scroll to 08/13 7 Machine name (up to 15 characters) Button Names on the QWERTY Keyboard To input upper case letter(s). To move the cursor (_) to the left or right side. To input numbers and/or symbols. To erase the character before the cursor.
Making Copies Basic Menu ■ Parameter Registration (Tandem Destination) To register the Tandem parameters for the device (remote), follow the steps in this paragraph. Requires network setup (see pages 77-78), and Parameter registration (see pages 12-15). The selected Remote printing copier must be either DP-8060/8045/8035. For the copier to function as a Remote/Tandem Copier it has to be setup in advance.
2 3 4 5 Making Copies Scroll to 05/05 6 Scroll to 05/05 7 IP Address∗ Ex: 192.168.0.1 When entering a 1 or 2-digit number segment, add "00" or "0" in front of the number, to scroll to the next segment of numbers or press the " " key to enter a period after the number. ∗ When clearing the IP address, press the " " key to move to the next segment of the IP address (∗∗∗.∗∗∗.∗∗∗.∗∗∗) and press the Clear key. 8 ∗ The machine name appears on the screen. Change the name if necessary.
Making Copies Basic Menu ■ Editing the Tandem/Remote Machine To edit the registered machine’s settings (IP Address, machine name or key name). 1 Open the Function Parameters screen by following the procedures 1 to 4 on pages 14 and 15. 4 Enter the new IP Address, same as for the Parameter Registration (Tandem Destination) procedure (see pages 14 and 15). 5 Enter the machine and key name, same as for the Parameter Registration (Tandem Destination) procedure (see pages 14 and 15).
2 3 Select the registered machine name 4 Making Copies Scroll to 05/05 2 3 Scroll to 05/05 Select the registered machine name 4 17
Making Copies Basic Menu ■ Job Queue Use when the desired print job is not executed immediately. Refers to a list of jobs waiting to print, delete or change their priority (Change for print job only). Job 1 Job 2 Job 3 1 Job 3 Job 1 Job 2 Deleted Select the job(s) 4 ∗∗ Select the job(s)∗ you wish to delete ∗ You can select to delete multiple/all jobs. ∗∗ You can select the print job priority. NOTE 18 ● The PRINT JOB QUEUE requires the Key Operator’s Password.
2 3 For Print Job Queue Only 4 Input Operation Password (4-digit) The default value for the password is 4 digits (0000). NOTE: ● Default Password is set to 0000, please consult the Panasonic authorized dealer to change it. ● The Print Job Queue password can be disabled by setting "11 Print Queue Delete" (Printer Settings for Key Operator) to "Free".
Making Copies Basic Menu ■ Completion Notice If Completion Notice is set, you will be notified on your computer when copying is completed.
3 or 4 Making Copies 2 and Setting desired copy mode. 5 Copy Job Completed Notice will be displayed on your PC.
Making Copies 2-Sided/Original ■ 1-Sided 2-Sided, 2-Sided 1-Sided 2-Sided Copy 2-Sided 1-Sided Copy 2-Sided 2-Sided Copy Copy 1-Sided, 2-Sided NOTE: ● The standard setting of the 2-Sided/Original -> Copy can be changed. Refer to "04 2-Sided Mode Default" of the Copier Settings. (See page 73) ● Special paper such as cardboard cannot be used for 2-Sided Copy.
3 4 5 Bind position or Making Copies Number of Copies or or 6 or From Platen: When "Last Original?" message is displayed. Ex: 2 originals Touch "NO" button. Place next original on the platen. 3 Press Start Key. 4 Touch "YES" button. or Long Edge Short Edge e Long E d g S ty le Short Edge Style (Portrait) (Portrait) Long Edge Style (Landscape) NOTE S h o rt E d g e S ty le (Landscape) ● When clearing the 2-Sided Copy mode: Select button or press the Reset key.
Making Copies 2-Sided/Original ■ Book Copy 2-Sided Copy Book 2-Sided Copy 1 2 1st Page Imaged Reduction/ Enlargement only Platen Ex: A3 size original A4 ∗ A3 1st Page 2nd Page 1st Page 2nd Page 1st page is copied onto the front side and 2nd page is copied onto the back side of the same paper. A4 A3 ∗ For a A3 size, Centre the book by length and width according to the A4 size marks.
3 4 Original format Copy format Making Copies 5 or or 6 When "Last Original?" message is displayed. Ex: 2 originals Touch "NO" button. Place next original on the platen. 3 Press Start Key. 4 Touch "YES" button.
Making Copies 2-Sided/Original Copy ■ 2 Page Copy Two facing pages or a A3 size original can be copied, and separated into 1-Sided sheets. 1 Platen Ex: A3 size original A4 ∗ A3 A4 A3 ∗ For a A3 size, Centre the book by length and width according to the A4 size marks.
2 3 4 Making Copies Copy Format or 5 When "Last Original?" message is displayed. Ex: 2 originals Touch "NO" button. Place next original on the platen. 3 Press Start Key. 4 Touch "YES" button.
Making Copies 2-Sided/Original Copy ■ N in 1 Copy From two/four/eight 1-Sided originals, side by side, to 1-Sided pages. 1 2 ● 2 in 1 Copy or ● 4 in 1 Copy 1 1 2 3 2 4 4 3 4 ● 8 in 1 Copy 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 8 ● 2-Sided Copy From four/eight/sixteen 1-Sided originals, side by side, to 2-Sided copies.
3 ● Copy is automatically reduced. 2 in 1: 71 %, 4 in 1: 50 %, 8 in 1: 35 % (Ex. A4 to A4R- size) ∗ When the 2-SIDED button is touched. ∗ Original N in 1 mode direction 4 Copy layout Making Copies Ex. 2 in 1 or or or Binding position or or 5 6 Reduction/ Enlargement only When 2 in 1 copying with different original size, select desired copy size with COPY SIZE Key (not PAPER TRAY button on the Touch Panel Display).
Making Copies 2-Sided/Original Copy ■ Booklet Copy Formats the output in a manner so that documents can be folded and/or saddle stitched∗ like a book. 2 1 2 3 4 1 1 3 DA-FS355A: Up to 40 originals DA-FS605: Up to 60 originals 4 A4 or A5 originals only ∗ When optional 1/2-Bin Saddle-Stitch Finisher ∗ (DA-FS355A/FS605) is installed. Reduction: Default copy size is fixed to 100 %.
3 4 Reduction/ Enlargement only (A4R or A3 size) Making Copies 2 • Default copy size is reduced, copy size can be selected as 100 % or reduced. • Refer to "11 Booklet Default Mag." of the Copier Settings. (See page 73) 5 Number of Copies When the Fold Position is not matched with centre position of the copies, set the binding margin. Refer to "15-17 Fold Position" of the General Settings (For Key Operator).
Making Copies 2-Sided/Original Copy ■ Multi-Size Feeding Use this function when copying mixed size originals (A3, B4, A4) using the ADF, original size can be detected automatically then can be copied to the same size or one specified size.
5 4 Bind position Number of Copies Making Copies 3 or 33
Making Copies 2-Sided/Original Copy ■ Job Build and SADF Mode Special originals (like thin paper, etc.) can be fed from the ADF Tray and copied continuously using the Job Build and SADF Mode. If the Job Build and SADF buttons are not shown on the Touch Panel display, the Job Build and SADF Modes must be enabled in the copier function settings. Please consult with the Key Operator.
3 4 5 Making Copies Number of Copies 6 When all the pages are read by the ADF, "Another Original? YES or NO" message appears. Select the "NO" button. 3 4 Select Sorting/Finishing settings or or etc. Number of Copies (Ex. 5) 5 6 When all the pages are read by the ADF, after approximate 5 seconds "Another Original? YES or NO" message appears. Select the "NO" button.
Making Copies Sort/Finish ■ When using Sort Mode Available for Functions without an optional Finisher Copy is stored on the Tray. Rotate-Sort Rotate-Group 1 Sort 2 Non-Sort 1 1 1 1 1 3 1 Multiple copy sets are sorted automatically. When loading both A4 and A4R sized paper, multiple copy sets are sorted automatically and stacked in alternate direction (rotation of 90 degrees).
2 or 3 Sort mode Number of Copies Making Copies 1 or or or Original ADF When the optional Finisher is installed, this screen will change as follows: For DA-FS330 or Staple Position Ex. Top left corner or For DA-FS600/FS605 or or For DA-FS355A or or ● Overflow When overflow oF indicator appears on the display, remove excess copies from the bin.
Making Copies Zoom/Effects ■ Zoom Copies with variable zoom ratios from 25 % to 400 % in 1 % increments. 25% 1 2 400% or ■ Auto Zoom The copy Zoom Ratio adjusts automatically to the selected paper size. Fit to paper length or width 1 2 Opening the ADF wider than 45 degrees.
3 Same vertical and horizontal ratio Different vertical and horizontal ratio 4 or ∗2 25% - 400% or or or Keypad ∗2 Number of Copies Making Copies 25% - 400% or or Keypad ∗2:Zoom Ratio If using the keypad to set the zoom ratio, press the CLEAR key first to reset the current zoom ratio mode. 3 5 4 Enlarged or reduced according to the vertical/ horizontal size of the paper.
Making Copies Zoom/Effects ■ Edge Unnecessary edge can be erased by setting a blank edge. 1 2 or NOTE: When "ZOOM" is selected, the erasing width varies depending on the zoom ratio. ■ Book When copying original such as the centre of folding position may be shaded. This shade can be easily eliminated. 1 2 Platen Ex: A3 size original A4 ∗ A3 The shade is erased. NOTE: ● When "ZOOM" is selected, the erasing width varies depending the zoom ratio.
3 Same vertical and horizontal void value Different vertical and horizontal void value 4 or or or Keypad 3 or Number of Copies Making Copies 5 - 99 mm 5 - 99 mm or or Keypad 4 5 - 99 mm or Number of Copies or Keypad 41
Making Copies Zoom/Effects ■ Margin The original can be copied by setting a binding margin on the edge or in the centre of the paper. 1 2 or NOTE: ● If a part of copied image is missing, change the Margin Reduction setting to Yes. Refer to "03 Margin Reduction Def." of the Copier Settings. (See page 73) ● When "OVERLAY" or "FORM OVERLAY" is selected, the binding margin is also set for the overlay original.
3 4 5 - 99 mm or Number of Copies or Keypad Making Copies Margin area 3 4 Paper Size (Paper Tray) Number of Copies 43
Making Copies Zoom/Effects ■ Image Repeat Creates multiple images on the sheet from single sided original. Minimum original size: 20 x 20 mm 1 2 Opening the ADF The dotted line can be set to “None” or “Print”. Refer to "18 Img. Repeat Dotted Line" of the Copier Settings. (See page 73) ● In Centring and Image Repeat mode, make copies with the ADF open more than 45 degrees wide. ● Remove the originals from the ADF before selecting the Centring and Image Repeat mode.
3 4 Number of Copies Making Copies Paper Size (Paper Tray) 3 Number of Copies 45
Making Copies Zoom/Effects ■ Stamping (Page Numbering) The original can be copied with page numbers printed. -1- 1 2 ADF only*1 1/8 NOTE: ● The default is -n- (number) format. To change to n/m (number/maximum) format, refer to "16 Page Numbering Style" of the Copier Settings. (See page 73) ■ Stamping (Date Stamp) The original can be copied with a printed date. The date is printed in DD/MM/YYYY format.
4 ORIENTATION Stamping position Stamping start page From 1, 2 or 3 Number of Copies (Max. 999) or From 3rd page From 2nd page ● Multiple copy sets will be From 1st page sorted automatically. 3 4 ORIENTATION Stamping position Changing the stamp date Number of Copies (Max. 999) or Select the CHANGE button, and then move cursor (_) to date with / buttons, and enter new date with the Keypad. ● Multiple copy sets will be sorted automatically.
Making Copies Zoom/Effects ■ Stamping (Issue Number Stamping) The original can be copied, and printed in consecutive numbers from 001 to 999. 1 2 ADF only*1 001 NOTE 48 *1 ● When copying with the Stamping mode combined with N in 1 mode, the Stamping mode can be used from the platen too. ● Only 1 stamp profile (page number, date, control number and character) can be selected to print per scanning job; 2 or more cannot be selected.
4 ORIENTATION or Stamping position Stamping the starting issue number or Keypad (up to 999) Number of Copies (Max. 999) ● Multiple copy sets will be sorted automatically.
Making Copies Insertion/Overlay ■ Cover The original can be copied using other types of paper as a Cover Page. Only the Front Cover, or Front and Back Covers can be selected. Original 2 1 + Copied cover Copied cover 1 2 2 ADF only Original Copied cover 2 Blank cover 1 Blank cover 1 1 3 4 + 2 3 4 ■ Page Insertion Originals can be copied with other media inserted between the specified pages.
3 4 Cover Page mode Blank Number of Copies (Max. 999) Paper Size∗ Paper Tray Making Copies Cover (Front) Cover (Front+Back) Copy 3 4 5 Page Insertion mode Blank Copy NOTE Paper Size∗ Paper Tray Set the insert page position with the Keypad.∗∗ If selecting other position, move / buttons, then set the sheet with the insert page position with the Keypad. ∗ The size and orientation of the printed copy and recording paper should match.
Making Copies Insertion/Overlay ■ OHP Interleaving Inserts Blank/Copied pages between Transparency film. OHP1 1 2 OHP2 + Original ADF only Copied page 1 Copied page 2 Blank page Original Blank page 1 (1) 2 OHP1 OHP(1) OHP2 OHP(2) (2) + (OHP: Transparency film) ■ Presentation Inserts Blank/Copied pages between Transparency film and make copied sets for handouts.
3 4 5 Load Transparency film onto the Sheet Bypass Blank Paper Size∗ Paper Tray Number of Copies (Max. 999) Making Copies OHP Interleaving mode Copy (OHP: Transparency film) 3 4 5 Load Transparency film onto the Sheet Bypass Presentation mode Blank Paper Size∗ Paper Tray Number of Copies for handouts (Max. 999) Copy (OHP: Transparency film) NOTE ∗ The size and orientation of the printed copy and recording paper should match.
Making Copies Insertion/Overlay ■ Overlay The first original is used as an overlay for the remaining originals. The first page is called the overlay original, and the second page onwards are called the scanned originals, respectively. 1 2 For overlay original or NOTE: ● When "MARGIN" is selected, a binding margin is also set for the overlay original. ● When "COVER" or "PAGE INSERTION" is selected, if the cover page and insertion pages are set to be copied, the overlay is not executed for Blank pages.
4 Density for 1st page image 5 Number of Copies (Max. 999) or 3 From Platen: Same procedure as for Form Overlay. (See pages 56 and 57) 4 Select the overlay image to store into memory for later use. Making Copies 3 or When the optional Hard Disk Drive is installed, enter File Name as below step 8 of File Edit. 5 (Register only) Density for registered image Select a file 6 or or or To cancel the registration, touch "CANCEL" button.
Making Copies Insertion/Overlay ■ Form Overlay Overlay an image stored in memory onto the copy. FORM Data The scanned original 1 2 or NOTE: ● Only A4 size is available for Form Overlay. ● If the orientation of the original is different than of the Form, the original is copied by automatically rotating when overlaid. ● The Form will not change size, and cannot be enlarged or reduced.
3 4 Number of Copies (Max. 999) Making Copies Select a file From Platen: If “Another Original? message is displayed, touch the "YES" or “NO” button. Ex: 2 originals Touch "YES" button. Place the next original on the Platen. 3 Press Start Key. 4 Touch "NO" button.
Making Copies Other Features ■ Job Memory Five Copy Jobs can be stored in Memory (M1 to M5) for recall at a later time. NOTE: When the M5 Key is used, the Double Exposure Mode should be set to "Off" in the Copier Settings "19 Double Exposure". (See page 73) 1 To store a job in memory 1 To recall a job stored in memory Storing the copy job Recalling the copy job or Ex: To store a job (2 sided original to 1 sided copy) in memory.
2 M1, M2, M3, M4, M5 2 Making Copies (See NOTE on page 58) 3 Number of Copies (Max.
Making Copies Other Features ■ Double Exposure Select Double Exposure copy mode when copying a 2-Sided original that is smaller than A5 size onto one side of a standard size media (Ex: A4 size). One side (Front) of the original is copied at the top of the page, and the other side (Back) is copied at the bottom on the copied page. Original Size: Maximum A5 1 Original Guide • Front Side of Original • Original Size: Free, maximum A5 size • Opening the ADF • Fit original to the Original Guide.
2 3 Other jobs requiring memory cannot be performed, while M5 is being used for the Double Exposure function. 6 5 Number of Copies (Max. 999) 7 The following steps illustrate how to make multiple copies when the Sort Mode is selected. (See page 36) Back Side of Original 1: YES Starts making copies. 2: NO Continues to copy another original.
Making Copies Other Features ■ Skyshot Mode Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened. Two types of Skyshot modes can be selected: 1)Digital Skyshot Mode : The scanning area (size) is not pre-determined. 2)Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2).
2 Open the ADF more than 45 degrees wide. 1 Number of Copies (Max. 999) Making Copies 1 3 2 Platen UpperLeft Corner Custom size∗ Number of Copies (Max. 999) ∗ Default M1/M2 size can be changed in the Function mode.
Making Copies Other Features ■ Reserve a Job The next copy job can be reserved even if the current copy job is not completed. 1 1st job 1st job 1st job Copy or Reserve 2nd job 2nd job 5 2nd job 6 Select Copy Mode or NOTE 64 ● The optional Hard Disk Drive is required to be installed.
2 3 4 5 Making Copies Select Copy Mode Scanning is completed 7 Job Waiting List can be confirmed with Job Queue.
Making Copies Other Features ■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode) These modes save power while the copier is not in use. 1 Power Save Mode ● The machine will not go into Sleep/Shutdown Mode when the Weekly Timer is selected. ● Sleep Mode/Shutdown Mode and timer setup is performed in the Key Operator mode.
To clear Making Copies 2 3 4 5 Other Copy Job is completed 67
Function Function Parameters ■ Using Function Modes to Change the Initial Settings General Settings Copier Settings Printer Settings Fax/Email Settings Scanner Settings Input Password General Settings for Key Operator Copier Settings for Key Operator General Settings: Printer Settings for Key Operator Fax/Email Settings for Key Operator Changing the Initial Machine Modes ● Power On Default mode, Manual Add Toner, etc.
Copier Settings: Changing the Initial Copy Modes ● Default function of each copy mode (See page 73) For Key Operator: Paper size priority, Original mode, Contrast, Job Build and SADF mode, etc. (See pages 79 and 80) Printer Settings: Changing the Initial Printer Modes ● Default function of each print mode (See page 75) For Key Operator: Job completion time, Page protection, Error page print, Spool function, PS configuration, Font list print, Mailbox data holding, etc.
Function Parameters ■ Procedure 1 2 Select the desired Function Mode NOTE 70 3 Select the desired Function ● Please refer to the appropriate operating instructions manual for function settings on options.
4 5 6 5 6 Set the desired Function Parameter(s). 4 When selecting the Key Operator Mode: Set the desired Function Function Parameters Set the desired Function Parameter(s). Password (8 digits: alpha-numerical; alphabet (case-sensitive), numbers, symbols (@, .
Function Parameters ■ General Settings Screen No. Modes 00 Power On Default Mode Selects mode. ● COPY, PRINTER, SCANNER, FAX∗ COPY 01 Manual Add Toner Adds toner manually. ● Off, On Off 02 Sort Memory Status Indicates the sorting memory status. ● Off, On Off 03 Departmental Counter Indicates the department counter. Consult with an authorized service provider 04 Data Security Kit Info.
■ Copier Settings Modes 00 Margin Value Default Selects the margin shift value. ● 5 mm, 10 mm, 15 mm, 20 mm 10 mm 01 Edge Value Default Selects the edge width. ● 5 mm, 10 mm, 15 mm, 20 mm 5 mm 02 Book Value Default Selects the book void width. ● 15 mm, 20 mm, 25 mm, 30 mm 20 mm 03 Margin Reduction Def. Selects the reduction ratio in margin mode. ● No, Yes No 04 2-Sided Mode Default Function sets the duplex priority mode.
Function Parameters ■ Scanner Settings Screen No. Modes 00 Original Mode Default Sets the original setting. ● Text, T/P (Text/Photo), Photo T/P 01 Compression Mode Def. Sets the default compression mode setting. ● MH, MR, MMR, JBIG MMR 02 Resolution Default Sets the default resolution setting. ● 150dpi, 300dpi, 600dpi 300dpi 03 Job Build And SADF Mode Sets the SADF mode setting. ● No, Yes No 04 Bind Edge 2-Side Orig. Sets the bind position, 2-Sided original setting.
■ Printer Settings 01/04 02/04 03/04 04/04 NOTE Modes Initial Setting Function 00 Number Of Prints Sets the initial number of prints. ● 1 ~ 999 1 01 Paper Size Sets the paper size setting. ● A3, B4, A4, B5, A5, LEDGER, LEGAL, LETTER, INVOICE, 8 x 13, 8.5 x 13 A4 02 Paper Tray Sets the Paper Tray setting. ● Auto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4, LCT Auto 03 Print Direction Sets the print direction setting.
Function Parameters For Key Operator ■ General Settings Screen No. Function Initial Setting 00 Paper Size Sets the paper size of each paper drawer.∗ ● Ledger, Legal, Letter, Letter-R, Invoice, A3, B4, A4, A4-R, B5, B5-R, A5, 8 x 13, 8.5 x 13, AUTO ∗∗ Consult with an authorized service dealer 01 Auto Reset Time Selects the Control Panel reset time. ● None, 30 sec., 1 min., 2 min., 3 min., 4 min. 1 min. 02 Power Save Mode Timer Sets the Energy Saver mode and time.
■ General Settings 04/13 05/13 Modes 15 Fold Position (A3/LDR) ● -4.0 - +4.0 mm 0.0 mm 16 Fold Position (B4) ● -4.0 - +4.0 mm 0.0 mm 17 Fold Position (A4/LTR-R) ● -4.0 - +4.0 mm 0.0 mm 20 Date Time Setting Sets date time registered. ● Day, Month, Year, Time 21 Weekly Timer Sets the weekly On/Off timer. Off 22 DHCP Default Sets the DHCP.∗ ● No, Yes Yes 23 TCP/IP Address Sets user IP address.∗ ● 3 digits x 4 24 TCP/IP Subnet Mask Sets the subnet mask.
Function Parameters For Key Operator ■ General Settings Screen No. 07/13 08/13 Modes 30 Sleep/Shutdown Select Selects the Sleep/Shutdown mode. ● Sleep, Shutdown 31 Print General Settings Print out the General Function Parameters list. ● Stop, Start 32 Corona Wire Cleaning Sets the corona wire cleaning. ● Off, On 33 MAC Address Indicates the MAC address. 34 Address Book Group ID Inputs group ID for address book.∗ ● 0 ~ 99 35 Tandem User Parameter Inputs parameter of user machine.
■ General Settings Screen No. Modes Initial Setting Function 48 Data Deletion Of HD Selects the deletion level of hard disk data in every copy/scan/print job. ● Basic, Medium, High When the optional hard disk unit is installed, every copy/print job data is automatically deleted after each job is completed. Select one of the 3 available Data deletion security levels (Basic, Medium and High).
Function Parameters For Key Operator ■ Copier Settings Screen No. 01/05 02/05 Modes Initial Setting Function 02 Text Contrast Selects contrast for Text mode. ●1 ~ 7 4 03 T/P Contrast Selects contrast for Text/Photo mode. ●1 ~ 7 4 04 Photo Contrast Selects contrast for Photo mode. ●1 ~ 7 4 06 Interleaving Default Selects OHP interleaving paper. ● Blank, Copy Blank 07 Page Insertion Default Selects page insertion. ● Blank, Copy Blank 08 Cover Mode Default Selects cover paper.
■ Printer Settings 01/03 Modes 00 Job Completion Time Sets the job completion time setting. ● 1 ~ 999 sec. 01 Page Protection Compresses automatically and then prints out. Off ● Off, On 02 Error Page Print Sets the error page printout. ● Off, On On 03 Spool Function Sets the spool function.∗,∗∗ ● Off, On On 04 Text Print Prints text page only. ● Off, On On 05 PS Configuration Print Prints the PS status page.∗ ● Stop, Start 06 Printer Settings Print Prints the printer status.
Function Parameters Examples ■ Weekly Timer Key Operator can administer the weekly On/Off timers. 1 2 5 Scroll to 05/13 8 Start time ● Set the time the machine automatically starts the Sleep/Shutdown mode.
3 4 5 Password (8 digits: alpha-numerical; alphabet (case-sensitive), numbers, symbols (@, ., _, and SPACE)) 6 7 8 ● Set the time the machine automatically wakes up from the Sleep/Shutdown mode.
Function Parameters Examples ■ Registering a department counter The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers for each department. (Maximum Number of Departments: 300) Contact your authorized service provider to enable the Department Counter feature.
3 4 5 Password (8 digits: alpha-numerical; alphabet (case-sensitive), numbers, symbols (@, ., _, and SPACE)) 6 For Identification Code 7 Function Parameters Select Page ID Code (8-digit) Select Department 6 Input a Department Name (up to 25 characters) using the QWERTY Keyboard, and touch the OK button.
Function Parameters Examples ■ Verifying a department counter 1 2 5 Scroll to 03/13 8 86
3 4 5 Password (8 digits: alpha-numerical; alphabet (case-sensitive), numbers, symbols (@, ., _, and SPACE)) 6 For Total Counter 7 For Department Counter 8 Prints all the active department counters. Select Page Clear the counter (8-digit) to “0” Function Parameters Displays the sum of all the active department counters. Select Department To clear the total counter, touch the INPUT button, enter 0 and touch the OK button.
Function Parameters Combined Function Table Others INSERTION/ OVERLAY ZOOM/ EFFECTS SORT/ FINISH 2-SIDED/ORIG.
Others Others INDEX A Adjust the Contrast ....................................................... 7 Auto Zoom .................................................................. 38 B Book ............................................................................ 40 Book 2-Sided Copy .............................................. 24 Booklet Copy .............................................................. 30 Button Names on the QWERTY Keyboard ................. 13 C Centring ..........................
Others S Saddle Stitch .............................................................. 36 Scanner Settings ........................................................ 74 Selecting the type of Original(s) ................................... 6 Shift-Group ................................................................. 36 Shift-Sort ..................................................................... 36 Shutdown Mode ......................................................... 66 Skyshot Mode .....................
Others memo 91
The following trademarks and registered trademarks are used throughout this manual: Microsoft, Windows, Windows NT, Windows Server, Outlook & Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the USA and other countries. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. Adobe, Acrobat Reader & Adobe logo are either registered trademarks or trademarks of Adobe Systems Incorporated.