DP-UB820-EB-TQBS0208_eng.book 1 ページ 2018年4月19日 木曜日 午後1時49分 Operating Instructions Blu-ray DiscTM Player Model No. DP-UB820 Firmware updates Panasonic is constantly improving the unit’s firmware to ensure that our customers are enjoying the latest technology. Panasonic recommends updating your firmware as soon as you are notified. For details, refer to “Firmware updates” (> 18) or http://panasonic.jp/support/global/cs/ (This site is in English only.) Thank you for purchasing this product.
DP-UB820-EB-TQBS0208_eng.book 2 ページ 2018年4月19日 Precautions 木曜日 午後1時49分 Batteries Mishandling of batteries can cause electrolyte leakage and may cause a fire. ≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer. ≥ When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. ≥ Do not mix old and new batteries or different types at the same time.
DP-UB820-EB-TQBS0208_eng.book 3 ページ 2018年4月19日 Restriction on use of unauthorized copied content 木曜日 午後1時49分 Wireless LAN connection The following limits are in place regarding the usage of this unit. You must be aware of these limits before using this unit. Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this unit. This unit adopts the following technology for copyright protection.
DP-UB820-EB-TQBS0208_eng.book 4 ページ 2018年4月19日 木曜日 午後1時49分 Table of contents Precautions . . . . . . . . . . . . . . . . . 2 Voice Control Getting started For details, refer to http://panasonic.jp/support/global/cs/ Accessories . . . . . . . . . . . . . . . . . 5 Unit and media care . . . . . . . . . . . 5 Playable media. . . . . . . . . . . . . . . 6 Control reference guide . . . . . . . . 8 Connecting to a TV . . . . . . . . . . 10 Connecting to an amplifier/receiver . . . . . . . . .
DP-UB820-EB-TQBS0208_eng.book 5 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Accessories Unit and media care Getting started Check the supplied accessories before using this unit. ∫ Clean this unit with a soft, dry cloth 1 ≥ Never use alcohol, paint thinner or benzine to clean this unit. ≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.
DP-UB820-EB-TQBS0208_eng.
DP-UB820-EB-TQBS0208_eng.book 7 ページ 2018年4月19日 木曜日 午後1時49分 Getting started ∫ Types of discs that cannot be played by this unit ∫ USB device Any other disc that is not specifically supported or previously described.
DP-UB820-EB-TQBS0208_eng.book 8 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Control reference guide ∫ Remote control When other Panasonic devices respond to the remote control of the unit, change the remote control code. (> 35) 1 2 11 3 1 4 2 12 3 13 14 4 5 15 6 7 16 17 8 18 19 9 20 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 10 20 -8- Turn the unit on and off TV operation buttons You can operate the Panasonic TV using this unit’s remote control.
DP-UB820-EB-TQBS0208_eng.book 9 ページ 2018年4月19日 木曜日 午後1時49分 Getting started ∫ Front 5 6 Pull to flip down the front panel. 1 1 2 3 4 2 3 4 Disc tray Display USB port ( DC 5 V 500 mA) This port supports USB 2.0 High Speed. Remote control signal sensor Distance: Within approx. 7 m Angle: Approx. 20e up and down, 30e left and right 5 6 Open or close the disc tray Standby/on switch (Í/I) (> 17) Press to switch the unit from on to standby mode or vice versa.
DP-UB820-EB-TQBS0208_eng.book 10 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Connecting to a TV 4K images can be played back when this unit is connected to 4K compatible TV. ≥ Before making any connections, please disconnect all the units from AC power. (Connect the AC mains lead after making all connections.) ≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. ≥ This unit consumes a small amount of AC power (> 42) even when turned off in standby mode.
DP-UB820-EB-TQBS0208_eng.book 11 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Connecting to an amplifier/receiver Enjoying video with a 4K-compatible TV and audio with an amplifier You can enjoy richer sound by using the HDMI AUDIO OUT terminal. (Audio is output in high resolution.) HDMI cable (18 Gbps) HDMI cable HDMI IN HDMI IN Amplifier/receiver Setting Set the following items in the setup menu (> 29): ≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”.
DP-UB820-EB-TQBS0208_eng.book 12 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Enjoying audio with an amplifier connected to the OPTICAL/2ch AUDIO OUT/7.1ch AUDIO OUT terminal Setting Set the following items in the setup menu (> 29): ≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29) ≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29) ≥ To enjoy audio with an amplifier connected to the OPTICAL terminal: Set “Audio Output” to “Off” in “Advanced Settings”.
DP-UB820-EB-TQBS0208_eng.book 13 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Connecting an amplifier to a 4K-compatible TV 3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV. ≥ This connection only supports up to 5.1ch. ≥ To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier must be ARC-compatible.
DP-UB820-EB-TQBS0208_eng.book 14 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector and an amplifier that is connected to the OPTICAL/2ch AUDIO OUT/7.1ch AUDIO OUT terminal HDMI cable (18 Gbps) HDMI cable HDMI IN HDMI IN Projector (2K-compatible) Amplifier/receiver Setting Set the following items in the setup menu (> 29): ≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”.
DP-UB820-EB-TQBS0208_eng.book 15 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector and an amplifier that is connected to the HDMI AUDIO OUT terminal and another amplifier that is connected to the OPTICAL/2ch AUDIO OUT/7.
DP-UB820-EB-TQBS0208_eng.book 16 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Connecting to the network The following services can be used when this unit is connected to broadband. ≥ Firmware can be updated (> 18) ≥ You can enjoy BD-Live/Network Service (> 21, 22) ≥ You can access other devices (Home Network) (> 23) ≥ This unit supports Direct Access and can make a wireless connection to wireless devices without router. You can use this function when enjoying Home Network feature, etc.
DP-UB820-EB-TQBS0208_eng.book 17 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Settings The following settings can be performed anytime in the Setup menu. (> 33, 34) Easy Settings After connecting your new player for the first time and pressing [Í], the basic settings screen will appear. Preparation Turn on the TV and select the appropriate video input. 1 Easy Network Setting After completing “Easy Settings”, you can perform “Easy Network Setting”. Select “Wired” or “Wireless” and press [OK].
DP-UB820-EB-TQBS0208_eng.book 18 ページ 2018年4月19日 木曜日 午後1時49分 Getting started Search for wireless network: ≥ The available wireless networks will be displayed on the screen. Select your network name. – If your network name is not displayed, search again by pressing the red button on the remote control. – Stealth SSID will not be displayed when you press the red button on the remote control. Enter manually by using “Manual setting”.
DP-UB820-EB-TQBS0208_eng.book 19 ページ 2018年4月19日 木曜日 午後1時49分 Playback HOME menu Playback Major functions of this unit can be operated from the HOME menu. Preparation Turn on the TV and select the appropriate video input. 1 Playback 1 2 Insert the media. Playback starts depending on the media. 2 Select the item to play and press [OK]. Repeat this step if necessary. Press [Í] to turn on the unit. Press [OK] or [2, 1] to select the item. ≥ Press [OK] or [3, 4] to select the item if necessary.
DP-UB820-EB-TQBS0208_eng.book 20 ページ 2018年4月19日 木曜日 午後1時49分 Playback Search/Slow motion Show the status messages Search While playing, press [SEARCH6] or [SEARCH5]. ≥ Ultra HD Blu-ray, MKV, MP4 and MPEG2: Audio is not heard. Slow motion While paused, press [SEARCH6] or [SEARCH5]. ≥ BD-Video and AVCHD: [SEARCH5] only. ≥ MKV, MP4 and MPEG2: Not effective. While playing, press [PLAYBACK INFO.]. You can check the detailed video content* playback status. The speed increases up to 5 steps.
DP-UB820-EB-TQBS0208_eng.book 21 ページ 2018年4月19日 木曜日 午後1時49分 Playback Enjoying Ultra HD Blu-ray Enjoying 3D video and photos You can enjoy the playback of Ultra HD Blu-ray discs with this unit. Preparation ≥ For 4K/HDR viewing, connect to a device and terminals that support HDCP2.2*1, 4K (50p/60p) 4:4:4 and HDR signals that meet Ultra HD Blu-ray standards. (> 10) Due to copyright restrictions, it may not be possible to play back certain discs unless this unit is connected to the Internet.
DP-UB820-EB-TQBS0208_eng.book 22 ページ 2018年4月19日 木曜日 午後1時49分 Playback Enjoying Network Service Slideshow Play a slideshow of photos and adjust various settings during the playback. 1 2 3 Network Service allows you to access some specific websites supported by Panasonic, and enjoy Internet contents such as photos, videos, etc. from Network Service home screen. Insert the media. Select “View Photos”. * Select an item and press the green button. The following items can be set.
DP-UB820-EB-TQBS0208_eng.book 23 ページ 2018年4月19日 木曜日 午後1時49分 Playback Home Network feature Before using the following features, be sure to configure the connected equipment on your Home Network. You can share photos, videos and music stored in the Network Contents server*1 [PC, smartphone, recorders, etc.] connected to your home network. ≥ About support format of Network Contents (> 44) Using Mirroring Mirroring is a function which displays a smartphone or tablet’s screen on a TV via this unit.
DP-UB820-EB-TQBS0208_eng.book 24 ページ 2018年4月19日 Playback Using the Digital Media Controller You can use a smartphone or tablet as the Digital Media Controller (DMC) to playback contents from Network Contents server*1 on the Renderer (this unit). Possible applications: Renderer Server Controller *3 *3 *3 Renderer 1 2 3 4 5 Server i Controller Press [HOME]. Select “Home Network” and press [OK]. Select “Media Renderer” and press [OK].
DP-UB820-EB-TQBS0208_eng.book 25 ページ 2018年4月19日 木曜日 午後1時49分 Playback VIERA Link Playing music continuously even after turning off the TV What is VIERA Link? When the unit is connected to a Panasonic TV (VIERA) that supports VIERA Link and an amplifier/receiver supports VIERA Link. 1 While playing music Press [OPTION]. 2 Select “TV Power Off”. VIERA Link is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or other device under “VIERA Link”.
DP-UB820-EB-TQBS0208_eng.book 26 ページ 2018年4月19日 木曜日 午後1時49分 Playback Option menu A variety of playback operations and settings can be performed from this menu. Available options differ depending on the playing contents and the condition of the unit. 1 Press [OPTION]. e.g., Ultra HD Blu-ray ∫ Start Slideshow Start the slideshow. ∫ Status Show the status messages. ∫ Rotate RIGHT ∫ Rotate LEFT Rotate the still picture. Operation Menu Soundtrack ∫ Shuffle Select whether to play shuffle or not.
DP-UB820-EB-TQBS0208_eng.book 27 ページ 2018年4月19日 木曜日 午後1時49分 Playback ∫ Luminance Adjustment Adjust the contrast, brightness and tone curve (white/black). Picture Settings Picture Settings ∫ Colour Adjustment Adjust the colour saturation and hue. Ultra HD Blu-ray Set 1 Optimum HDR Adjustment The icon changes depending on the playback media. Luminance Adjustment Colour Adjustment ∫ Sharpness Adjustment Adjust the sharpness of images. The greater the value is, the sharper images will be.
DP-UB820-EB-TQBS0208_eng.book 28 ページ 2018年4月19日 木曜日 午後1時49分 Playback Sound Settings ∫ Sound Effects*1, *2 Select the sound effect. (Upsampling up to 192 kHz/32 bit is possible.) ≥ Night Surround : Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily. ≥ Remaster : This feature gives you brighter sound by increasing the high frequency portion of the audio.
DP-UB820-EB-TQBS0208_eng.book 29 ページ 2018年4月19日 木曜日 午後1時49分 Reference Setup menu Reference Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby. 1 2 3 Press [HOME]. Select “Setup”. Select “Player Settings”.
DP-UB820-EB-TQBS0208_eng.book 30 ページ 2018年4月19日 木曜日 午後1時49分 Reference ∫ Advanced Settings Press [OK] to show the following settings: h HDCP Output Setting If you connect to a TV that does not support HDCP2.2 via an amplifier or speaker, some images may be displayed as black screens. In that case, select “HDCP1.4 Limit”. h Colour Mode This setting is for selecting colour-space conversion of the image signal.
DP-UB820-EB-TQBS0208_eng.book 31 ページ 2018年4月19日 木曜日 午後1時49分 Reference h BD-Video Secondary Audio Select whether or not to mix the primary and secondary audio (including the button click sound). If “Off” is selected, the unit outputs the primary audio only. Picture ∫ Still Mode Select the type of picture shown when you pause playback. Automatic Automatically selects the type of picture shown. Field Select if jittering occurs when “Automatic” is selected.
DP-UB820-EB-TQBS0208_eng.book 32 ページ 2018年4月19日 木曜日 午後1時49分 Reference ∫ HDMI Output Settings of Music Playback Minimise the audio noise during music playback by automatically switching the video output to 1080i. Language ∫ Settings for High Clarity Sound Set a terminal that will stop processing audio signals or whether or not to turn on/off the unit’s display when “High Clarity Sound” (> 28) is set to “On (Video Off)” or “On (Video On)”. ≥ Set an option for video playback and audio playback.
DP-UB820-EB-TQBS0208_eng.book 33 ページ 2018年4月19日 木曜日 午後1時49分 Reference h Network Service Settings (> 22) Press [OK] to show the following settings: Network ∫ Easy Network Setting (> 17) ∫ Network Settings Perform network-related settings individually. Press [OK] to show the following settings: h LAN Connection Mode Select the LAN connection method. ≥ When not using wireless LAN (when turning it off), select “Wired”.
DP-UB820-EB-TQBS0208_eng.book 34 ページ 2018年4月19日 木曜日 午後1時49分 Reference Networked Standby Even when “Quick Start” is set to “Off”, by using a remote device (smartphone or tablet), you can wake the unit from the off state and start certain Internet content services. ≥ To activate operation from the remote device, select “On”. But power consumption in standby mode will increase.
DP-UB820-EB-TQBS0208_eng.book 35 ページ 2018年4月19日 Reference ∫ Front Panel Display Changes the brightness of the unit’s display. ≥ If “Automatic” is selected, the display is set to bright and only dimmed during playback. ≥ This setting does not work when “Front Panel Display” in “Settings for High Clarity Sound” is set to “Off”. (> 32) (Except for when “High Clarity Sound” is set to “Off”) ∫ Quick Start Speed of start-up from standby mode is increased.
DP-UB820-EB-TQBS0208_eng.book 36 ページ 2018年4月19日 木曜日 午後1時49分 Reference Troubleshooting guide Before requesting service, please perform the following checks. If the problem remains unresolved, consult your dealer for instructions. General operation To return to the factory default. h Select “Yes” in “Default Settings” in the Setup menu. (> 35) To return all settings to the factory preset.
DP-UB820-EB-TQBS0208_eng.book 37 ページ 2018年4月19日 木曜日 午後1時49分 Reference You have forgotten your ratings password. You want to cancel the ratings level. h The ratings level returns to the factory defaults. 1 While the unit is on Press and hold [OK], the yellow button and the blue button on the remote control at the same time for more than 5 seconds. – “00 RET” is displayed on the unit’s display. 2 Press [1] (right) repeatedly on the remote control until “03 VL” is displayed on the unit’s display.
DP-UB820-EB-TQBS0208_eng.book 38 ページ 2018年4月19日 木曜日 午後1時49分 Reference Video is not output. h Video is not output when the “High Clarity Sound” is set to “On (Video Off)”. (> 28) h Video from the HDMI AUDIO OUT terminal is not output when the “HDMI(AUDIO) Output Mode” is set to “Audio Only”. (> 29) Video is not output in 4K or high-definition. h Confirm that “Video Format” in the Setup menu is set properly. (> 29) h Confirm the HDMI cable, related connections and the compatibility of TV video input.
DP-UB820-EB-TQBS0208_eng.book 39 ページ 2018年4月19日 木曜日 午後1時49分 Reference Audio Cannot hear the desired audio. h Check the connections and the “Digital Audio Output” settings. (> 11, 31) h When the unit is connected to an amplifier/ receiver with the 2ch AUDIO OUT/7.1ch AUDIO OUT terminals, set “Analogue Audio Output”. (> 32) h To output audio from a device connected with an HDMI cable, set “Audio Output” to “On” in the Setup menu.
DP-UB820-EB-TQBS0208_eng.book 40 ページ 2018年4月19日 木曜日 午後1時49分 Reference Playback Disc cannot be played. h The disc is dirty. (> 5) h The disc is not finalized. (> 7) h Depending on the Ultra HD Blu-ray disc, it may not be possible to perform playback unless this unit is connected to the Internet. Still pictures (JPEG) do not play back normally. h The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back. I can’t play back BD-Live.
DP-UB820-EB-TQBS0208_eng.book 41 ページ 2018年4月19日 Reference Messages on the unit’s display F99 h The unit fails to operate properly. Press [Í/I] on the main unit for 3 seconds to switch the unit to standby, then switch back on. NET h While connecting to a network. NO PLAY h There is a viewing restriction on a BD-Video or DVD-Video. (> 34) h A DVD-Video disc with an incompatible region code is inserted. NO READ h The media is dirty or badly scratched. The unit cannot play.
DP-UB820-EB-TQBS0208_eng.book 42 ページ 2018年4月19日 木曜日 午後1時49分 Reference Specifications File format General File format Signal system PAL/NTSC Operating temperature range i5 oC to i35 oC Operating humidity range 10 % to 80 % RH (no condensation) AUDIO OUT (Pin jack) Analogue Audio output (2 ch to 7.1 ch selectable): 1 pc. Standard : 0.5 Vrms, Full scale : 2.0 Vrms at 1 kHz (<500 ≠) DIGITAL AUDIO OUT (OPTICAL) 1 pc. Output format : PCM, Dolby Digital, DTS® HDMI OUT (19 pin type A) 2 pcs.
DP-UB820-EB-TQBS0208_eng.book 43 ページ 2018年4月19日 木曜日 午後1時49分 Reference File format FLAC “.FLAC”, “.flac” WAV “.WAV”, “.wav” Maximum sampling rate: 384 kHz/32 bit AAC “.M4A”, “.m4a” Maximum sampling rate: 48 kHz/320 kbps “.WMA”, “.wma” This unit supports tags, but only titles, artist names and album names can be displayed. Maximum sampling rate: 48 kHz/385 kbps *2 The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit.
DP-UB820-EB-TQBS0208_eng.book 44 ページ 2018年4月19日 木曜日 午後1時49分 Reference Supported format for Network Contents Playback Language code list Language When this unit works as a Network Contents client, following contents are playable. ≥ File formats that are not supported by your Network Contents server* cannot be played. * DLNA compatible server, etc. Video Container Video codec Audio codec MKV AVCHD MP4 H.264 HEVC H.264 H.264 HEVC AAC PCM Vorbis FLAC Dolby Digital AAC Example of file extension .
DP-UB820-EB-TQBS0208_eng.book 45 ページ 2018年4月19日 木曜日 午後1時49分 Reference Licenses “AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/ Progressive” are trademarks of Panasonic Corporation and Sony Corporation. Java is a registered trademark of Oracle and/or its affiliates. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc.
DP-UB820-EB-TQBS0208_eng.
DP-UB820-EB-TQBS0208_eng.book 47 ページ 2018年4月19日 木曜日 午後1時49分 Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0344 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am – 5:00 pm (Excluding public holidays). ≥ For further support on your product, please visit our website: www.panasonic.co.